Jak wyszukiwać?
wyszukiwanie zaawansowane
Nauki Techniczne

Archives of Civil Engineering

Archives of Civil Engineering

Opis
Archives of Civil Engineering, quarterly journal of the Polish Academy of Sciences (“Committee for Civil and Water Engineering”) and Warsaw University of Technology (“Faculty of Civil Engineering) publish, exclusively in English, original scientific articles of the theoretical, experimental, numerical and practical nature. These can be research and review papers as well as case studies from all branches of Civil Engineering.

The main fields of our interest are related to: structural mechanics, soil mechanics, foundations, brick, concrete, timber, steel, glass and composites polymer structures, hydro-technical objects, bridges, rail and road structures, building physics, construction management, building materials, transportation, land surveying, building services and education of civil engineers.

With long history, dated to 1954, the periodical is available both in electronic and traditional version. The maximum number of papers per volume is 40. We proudly obtained the score of 100 points from the Ministry of Science and Academic Education.


IMPACT FACTOR 2023: 1.1

CiteScore metrics from Scopus, CiteScore 2023: 1.5
SCImago Journal Rank ( SJR) 2023: 0.273
Source Normalized Impact per Paper ( SNIP) 2023: 0.511


Submit your article


ISSN
ISSN 1230-2945
Wydawcy
WARSAW UNIVERSITY OF TECHNOLOGY FACULTY OF CIVIL ENGINEERING and COMMITTEE FOR CIVIL ENGINEERING POLISH ACADEMY OF SCIENCES

Editor-in-Chief
Henryk Zobel ORCID logo0000-0002-4227-0506, Warsaw University of Technology, Faculty of Civil Engineering, The Institute of Roads and Bridges, Warsaw


Deputy/Managing Editors:

Dorota Walesiak

Ludomir Szubert


Scientific Advisory Committee:

Huaming An, Kunming University of Science and Technology, Kunming, China

José Aguiar, University of Minho, Guimarães, Portugal

Jan Bień, Wrocław University of Technology, Poland

Thomas Bock, School of Engineering, TU Munich, Germany

Luc Courard, University of Liège, Belgium

Carlos Chastre, University of Lisbon, Portugal

Lech Czarnecki, Building Research Institute, Warsaw, Poland

Natalia Distefano, University of Catania, Italy

Łukasz Drobiec, Silesian University of Technology, Gliwice, Poland

Mariaenrica Frigione, University of Salento, Lecce, Italy

Kazimierz Furtak, Cracow University of Technology, Poland

Stanisław Gaca, Cracow University of Technology, Poland

Andrzej Garbacz, Warsaw University of Technology, Poland

Dariusz Gawin, Lodz University of Technology, Poland

Marian Giżejowski, Warsaw University of Technology, Poland

Anna Halicka, Lublin University of Technology, Poland

Liang He, Chongqing Jiaotong University, China

Zdenek Kala, Brno University of Technology, Czech Republic

Oleg Kapliński, Poznan University of Technology, Poland

Maria Kaszyńska, West Pomeranian University of Technology, Szczecin, Poland

Zbigniew Kledyński, Warsaw University of Technology, Poland

Jana Korytarova, Brno University of Technology, Czech Republic

Aleksander Kozłowski, Rzeszow University of Technology, Poland

Marian Kwietniewski, Warsaw University of Technology, Poland

Raffaele Landolfo, University of Naples, Italy

Zbigniew Lechowicz, Warsaw University of Life Sciences, Poland

Cezary Madryas, Wroclaw University of Technology ,Poland

Jacek Mąkinia, Gdansk University of Technology, Poland

Peter Mesaros, Kosice University of Technology, Slovakia

Radosław Michałowski, University of Michigan, Ann Arbor, USA

Ehsan Noroozinejad Farsangi, Graduate University of Advanced Technology, Iran

Andrzej S. Nowak, University of Auburn, Alabama, USA

Hartmut Pasternak, Brandenburg Technical University, Cottbus, Germany

Daniele Peila, Polytechnic University of Turin, Italy

Eugenio Pellicier, Valencia Polytechnic University, Spain

Adam Podhorecki, University of Science and Technology, Bydgoszcz, Poland

Wojciech Radomski, University of Science and Technology, Bydgoszcz, Poland

Elżbieta Radziszewska - Zielina, Cracow University of Technology, Poland

Diogo Ribeiro, Polytechnic of Porto/School of Engineering, Portugal

Anna Siemińska - Lewandowska, Warsaw University of Technology, Poland

Anna Sobotka, AGH University of Science and Technology, Poland

Edward Szczechowiak, Poznan University of Technology, Poland

Elżbieta Szmigiera, Warsaw University of Technology ,Poland

Antoni Szydło, Wroclaw University of Technology, Poland

Wiesław Trąmpczyński, Kielce University of Technology, Poland

Andrzej Truty, Cracow University of Technology, Poland

Thomas Ummenhofer, Karlsruhe Institute of Technology, Germany

Ru Wang, Tongji University, Shanghai, China

Krzysztof Wilde, Gdansk University of Technology, Poland

Piotr Woyciechowski, Warsaw University of Technology, Poland

Paulo Vila Real, University of Aveiro, Portugal

Giulia Viggiani, Cambridge University, United Kingdom

Jenny Yan, China Railway Academy

Hua-Ping Wan, Zhejiang University, China

Katarzyna Zabielska - Adamska, Bialystok University of Technology, Poland

Edmundas K. Zavadskas, Vilnius Gediminas Technical, Lithuania

Alphose Zingoni, University of Cape Town, South Africa


Politechnika Warszawska

Wydział Inżynierii Lądowej

Al. Armii Ludowej 16, 00-637 Warszawa, Polska

Pokój 618; Telefon 22 234 62 84

e-mail: ace.editor@pw.edu.pl

website: http://ace.il.pw.edu.pl

 

 

 

Archives of Civil Engineering is an open access journal with all content available with no charge in full text version.

The journal content is available under the licencse CC BY-NC-ND 4.0 https://creativecommons.org/licenses/by-nc-nd/4.0/.
  • Roczniki i numery
  • Instrukcja dla autorów
  • Zasady etyki publikacyjnej
  • Procedura recenzowania

Wybierz numer

Zawartość

Archives of Civil Engineering | 2021 | vol. 67 | No 1

1 Book Review: Bill Addis (ed.) Physical Models: Their historical and current use in civil and building engineering design, Ernst & Sohn, Berlin 2021-01-14
Zbigniew Cywiński
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 3-4
Pobierz PDF Pobierz RIS Pobierz Bibtex

Autorzy i Afiliacje

Zbigniew Cywiński
2 Dynamic Response of the Stuttgart TV Tower Measured by Classical Instruments and GPS Technology
Peter Breuer , Tadeusz Chmielewski , Piotr Górski
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 7-38 | DOI: 10.24425/ace.2021.136459
Słowa kluczowe: Stuttgart TV Tower GPS measurements wind-induced response natural frequency damping ratio
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

This paper compares the measurement results of dynamic characteristics, including natural frequencies, damping ratio, and wind-induced responses of the Stuttgart TV Tower (TV Tower), obtained by Lenk in 1959 using classical instruments with those obtained by the authors a few decades later using Global Positioning System (GPS). The objective of this paper was to monitor the response of the TV Tower under wind loading, which is an important tool for the validation of its design, construction, and structural health. During the authors’ GPS measurements, weak and moderate wind speeds occurred most of the time. Only in 2007, the stronger wind observed (90 < V < 100 km/h) at the head of the TV Tower (H=157 m), which caused displacements in the decimetre range. Further measurements in 2011 were carried out, using additional GPS receivers with a higher data rate. The results achieved by the GPS prove that the cross-wind response was larger than the along-wind component for all ranges of wind speed, which occurred during the measurement periods, i.e. from 2002 to 2015. The authors of this paper extended Lenk’s results, by the static and along-wind components, confirmed the first natural frequency, and damping ratio, evaluated by the Random Decrement technique. Mounting a GPS receiver, on the steel antenna mast tip, enabled detection of the second natural frequency fs2 = 0.800 Hz, which is the frequency of the mode shape of the TV Tower steel antenna mast. Lenk did not measure this frequency.
Przejdź do artykułu

Autorzy i Afiliacje

Peter Breuer
1
Tadeusz Chmielewski
2
Piotr Górski
2
  1. University of Applied Sciences, Schellingstrasse 24, 70174 Stuttgart, Germany
  2. Opole University of Technology, Faculty of Civil Engineering and Architecture, Katowicka 48, 45-061 Opole, Poland
3 Relocation of a Historic Building at the Old Norblin Factory in Warsaw
Paweł Grzegorz Kossakowski
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 39-55 | DOI: 10.24425/ace.2021.136460
Słowa kluczowe: historic buildings relocation of buildings special construction works special engineering
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The present article relates to the subject of the relocation of buildings. It presents a historical background of operations of this type carried out in the past around the world, as well as in Poland. It goes on to discuss in more detail some pioneering structural and technological solutions used during the relocation of the Rogatka Grochowska (Grochowska tollgate) building, carried out in 1961 in Warsaw. The article’s main theme is the process of relocation of a historic building No. 15 within the old Norblin Factory in Warsaw, which took place during the final months of 2018. The article briefly presents the factory’s history. It also describes the assumptions of the related project, which covers the development of the old Norblin Factory. It discusses in detail the concept and the scope of the relocation of building No. 15, with the description of the structural and technical design related to this process. The progress of the relocation which took place in 2018 has been reported in detail.
Przejdź do artykułu

Autorzy i Afiliacje

Paweł Grzegorz Kossakowski
1
ORCID: ORCID
  1. Kielce University of Technology, Faculty of Civil Engineering and Architecture, Al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland
4 Contact Interaction between Corrugated Steel Shell and the Soil Backfill Determined based on the Measurements of Shell Deformations
Czesław Machelski , Leszek Korusiewicz
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 57-79 | DOI: 10.24425/ace.2021.136461
Słowa kluczowe: soil-shell structures earth pressure shell deformation contact interaction
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Unlike in conventional bridges, the backfill and the roadway pavement have a major bearing on the load capacity of buried corrugated metal structures. In the soil-steel structure model one can distinguish two structural subsystems: the shell made of corrugated steel plates and the soil backfill with the road pavement. The interaction between them is modelled as a contact (interfacial) interaction, i.e. forces normal and tangent to the surface of the shell. The normal interactions are variable during both construction and service life. Two algorithms are presented. In the first algorithm on the basis of unit strains the internal forces in the shell are determined and consequently the contact interactions are calculated. A large number of measuring points distributed on the circumferential section of the shell is needed for the calculations. In the second algorithm the collocation condition, according to which the result obtained from the shell geometry model must agree with the measured displacement of the structure’s collocation point, is used. When there are more such points, the estimated result is more precise. The advantage of both algorithms is that they take into account the physical characteristics of the soil in the backfill layers, but above all the backfill laying and compacting technology. The results of such analyses can be the basis for comparing the effectiveness of conventional geotechnical models.
Przejdź do artykułu

Autorzy i Afiliacje

Czesław Machelski
1
ORCID: ORCID
Leszek Korusiewicz
2
  1. Wrocław University of Science and Technology, Faculty of Civil Engineering, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
  2. Wrocław University of Science and Technology, Faculty of Mechanical Engineering, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
5 An Influence of a Generated Track Intentional Irregularity on a Static Work of a Railway Track
Włodzimierz Andrzej Bednarek
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 81-97 | DOI: 10.24425/ace.2021.136462
Słowa kluczowe: railway track’s imperfection simulation of irregularity a concave and convex irregularity
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The purpose of the following paper is to present the experimental field investigations in jointless railway track subjected to the author’s generated imperfections on its static work. The main concept for the executed investigations is to induce an intentional imperfection (both a concave and convex irregularity) in an actual railway track, propose a way of appropriate measurement (using the PONTOS system), and utilize author’s field investigations results to calibrate necessary parameters for theoretical calculations. An experimental formula describing the value of the force transferred from the rail to the railway sleeper on the grounds of the survey site caused by a locomotive is provided. Furthermore, the deflection of the chosen railway rail and sleeper due to the generated imperfection is subjected to analysis. Finally the objective of the present consideration is to resolve the calculations into the beam element such that the results can be used in computational railway practice. The scheme of the so-called a “hanging sleeper” is particularly unfavourable, a gap arises between the sleeper and the foundation, for which the significant changes appear, especially in the rail deflections and stresses. A work scheme of the railway track elements is described on the generated short concave and convex irregularity.
Przejdź do artykułu

Autorzy i Afiliacje

Włodzimierz Andrzej Bednarek
1
  1. Poznan University of Technology, Faculty of Civil and Transport Engineering, Institute of Civil Engineering, Division of Bridges and Railway Engineering, ul. Piotrowo 5, 60-965 Poznań, Poland
6 The Effect of Limit Values of Siliceous Fly Ash Content on the Durability of Concrete Structures in Rela tion to Exposure Classes
Dominik Logoń
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 99-110 | DOI: 10.24425/ace.2021.136463
Słowa kluczowe: durability siliceous fly ash content limit exposure classes frost resistance
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The paper concerns the use of limit value of siliceous fly ash content in concrete structures, with the application of various types of cements - based on the current standards and taking into consideration the requirements concerning current exposure classes. The conclusions were based on a review of literature, the results of scientific research, conclusions from expert opinions and buildings and structures supervision reports. In summary, it has been concluded that the use of limit content of siliceous fly ashes may result in negative changes in the properties of composites, which should be ruled out or confirmed by appropriate tests, taking into account the precisely defined composition of concrete, cement and the applied additives and admixtures. It has been emphasised that the problem concerns composites with the increased and limit values of fly ash content, especially as regards cements with the lowered content of clinker and high content of additives and admixtures (affecting the physical and mechanical properties of cement composites). Attention has been drawn to the need to modify the exposure classes, to focus on the requirements concerning the properties of concrete and not the composition - in order to achieve the expected durability.
Przejdź do artykułu

Autorzy i Afiliacje

Dominik Logoń
1
  1. Wrocław University of Science and Technology, Faculty of Civil Engineering, pl.Grunwaldzki 11, 59-377 Wrocław, Poland
7 The View of Construction Companies’ Managers on the Impact of Economic, Environmental and Legal Policies on Investment Process Management
Janusz Sobieraj , Dominik Metelski , Paweł Nowak
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 111-129 | DOI: 10.24425/ace.2021.136464
Słowa kluczowe: management of construction companies construction processes policies of the state
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

This article discusses the impact of economic, environmental and legal policies on management of the companies involved in investment projects in the area of industrial construction in Poland. Our empirical research relied on conducting a survey in a group of construction managers and experts. The survey involved 158 Polish companies from the SME sector dealing from the industrial construction. The questionnaire responses were thoroughly analysed and interpreted with the use of a method called exploratory factor analysis (EFA). The results provide an insight into successful management of investment processes realised by construction companies implementing projects in the area of industrial construction. The most important factors identified with the use of this research method turned out to be the availability of technology in a stable political system, stability of economic and tax systems, stable social policy, stability and transparency of the legal system and well-targeted environmental policies. In general, it can be stated that the effective management of industrial construction projects is influenced by the economic, environmental and legal policies of the state.
Przejdź do artykułu

Autorzy i Afiliacje

Janusz Sobieraj
1
ORCID: ORCID
Dominik Metelski
2
ORCID: ORCID
Paweł Nowak
1
ORCID: ORCID
  1. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
  2. University of Granada, Faculty of International and Spanish Economics, Campus de Cartuja s/n, 18071 Granada, Spain
8 Analytical Models Tracing Deformation of Wood-Framed Walls During Vertical Transport
Jarosław Malesza , Czesław Miedziałowski
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 131-146 | DOI: 10.24425/ace.2021.136465
Słowa kluczowe: wood-framed wall vertical lifting analytical model fastener
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Vertical transport of wall-panels is a part of the prefabrication process of wood-framed buildings. The total dead weight of a wall is suspended on several lifting slings, pointwise clasping the top plate of the wall. This indicates, that all the weight of a wall is cumulated in sheathing-to-framing fasteners, usually staples. This article presents experimental investigations and analytical models evaluated for the description of light wood-framed walls in the process of lifting. Three different models cover the analytical approach: a model of a simple beam on elastic supports (BSS), a model of assembled beams (ACBS), three-dimensional (3D) spatial FE model of the wall (WFEM). Board-to-beam joint material parameters are determined on the base of experimental results. These connections are converted into two variants in the form of spring elements for 2D analysis, and beam elements for 3D analysis.
The numerical results exhibit that the proposed models may correctly represent behavior of a real wall in lifting, applying elastic materials parameters.
Przejdź do artykułu

Autorzy i Afiliacje

Jarosław Malesza
1
Czesław Miedziałowski
1
ORCID: ORCID
  1. Bialystok University of Technology, Faculty of Civil Engineering and Environmental Sciences, Wiejska 45A, 15-351 Bialystok, Poland
9 Pseudo-Static Test of Steel-Glulam Composite Beam-to-Column Exterior Joints
Shaowei Duan , Xinglong Liu , Jian Yuan , Zhifeng Wang
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 147-161 | DOI: 10.24425/ace.2021.136466
Słowa kluczowe: beam-to-column exterior joint Steel-glulam pseudo-static test cross-section form energy dissipation capacity
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Steel-glulam structure is a new type of composite structure,glulam have lateral support effect on steel plate, that can prevent premature buckling of steel plate and improve the stability of steel structure. In order to study the influence of column’s cross-section form on the seismic performance of steel-glulam composite beam-to-column exterior joint, the column’s cross-section form was taken as the basic variable (glulam rectangular section , H-beam section and H-beam-glulam rectangular section were used respectively). The pseudo-static tests of three composite beam-to-column joints were carried out to observe the different failure modes, and obtain the mechanical performance indexes. The experiment results demonstrated that: The energy dissipation capacity of beam-to-column exterior joint composed of glulam column was the worst, the ultimate bearing capacity and stiffness were the lowest. The ultimate bearing capacity of the exterior joints formed by the H-beam column and the H-beam-glulam composite column were both high, and their ductility coefficients were similar, while the former had better energy dissipation capacity.
Przejdź do artykułu

Autorzy i Afiliacje

Shaowei Duan
1
Xinglong Liu
2
Jian Yuan
1
Zhifeng Wang
1
  1. Central South University of Forestry and Technology, College of Civil Engineering, Changsha, Hunan, China
  2. Shenzhen Huayang International Design Group Co., Ltd. Changsha Branch, Changsha, Hunan, China
10 Anisotropy of Soil Shear Strength Parameters Caused by the Principal Stress Rotation
Grzegorz Wrzesiński
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 163-187 | DOI: 10.24425/ace.2021.136467
Słowa kluczowe: soil undrained shear strength effective cohesion effective angle of internal friction principal stress rotation torsional shear hollow cylinder test triaxial test
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The paper presents the phenomenon of principal stress rotation in cohesive subsoil resulting from its loading or unloading and the impact of this phenomenon on the values of soil shear strength parameters: undrained shear strength τfu, effective cohesion c’, effective angle of internal friction φ’. For this purpose, tests in a triaxial apparatus and torsional shear hollow cylinder apparatus on selected undisturbed cohesive soils: sasiCl, saclSi, clSi, Cl, characterized by different index properties were carried out. Soil shear strength parameters were determined at angle of principal stress rotation α equal to 0° and 90° in tests in triaxial apparatus and α equal to 0°, 15°, 30°, 45°, 60°, 75°, 90° in tests in torsional shear hollow cylinder apparatus. The results of laboratory tests allow to assess the influence of the principal stress rotation on the shear strength parameters that should be used to determine the bearing capacity of the subsoil.
Przejdź do artykułu

Autorzy i Afiliacje

Grzegorz Wrzesiński
1
ORCID: ORCID
  1. Warsaw University of Life Sciences, Institute of Civil Engineering, Nowoursynowska 159, 02-776 Warsaw, Poland
11 Advantages of Using 3D Scanning in the Survey of Architectural Monuments on example of Archeological Sites in Egypt and Russia
Wojciech Terlikowski , Martyna Gregoriou-Szczepaniak , Ewa Sobczyńska , Kacper Wasilewski
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 189-201 | DOI: 10.24425/ace.2021.136468
Słowa kluczowe: laser scanning Archaeological Heritage Masonry Structures
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Every conservation works related to an ancient masonry structures should be preceded by an appropriate diagnostic. This should be understood as geometrical survey and various tests, which results with a proper analysis of the structure, identification of materials, technologies and techniques used during construction. The effective tool which could be used in this field is 3-D laser scanning. The digital image obtained as a result of scanning could be a proper base for a preservation programme, as well as help for creation of a precise digital models for a structural analysis. The examples of 3-D laser scanning application presented in the article are diagnostic works carried by the Division of Fundamentals of Building, Warsaw University of Technology, with the cooperation of Warsaw University, at the archaeological sites in Alexandria, Egypt and in Tanais, Rostov, Russia. Based on this works some most important advantages of laser scanning in identification, diagnostics and preservation of ancient architectural monuments was stated.
Przejdź do artykułu

Autorzy i Afiliacje

Wojciech Terlikowski
1
ORCID: ORCID
Martyna Gregoriou-Szczepaniak
1
ORCID: ORCID
Ewa Sobczyńska
1
ORCID: ORCID
Kacper Wasilewski
1
ORCID: ORCID
  1. Warsaw University of Technology, Faculty of Civil Engineering, Amii Ludowej 16, 00-637 Warsaw, Poland
12 Effect of the Ground Granulated Blast Furnaceslag on the Pore Structure of Concrete
Abdul Chalid
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 203-214 | DOI: 10.24425/ace.2021.136469
Słowa kluczowe: compressive strength pore structure GGBFS cured at site mercury intrusion porosimetry
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The objective of this study is to analyze effect of ground granulated blast furnace slag (GGBFS) in concrete on the pore structure, this research will contribute to the knowledge regarding the use of GGBFS as a cementitious material in terms of the future reference and potential improvement to the properties of concrete. To this aim, on the one hand a control specimens (CS) and another samples with 40% and 60% of GGBFS as replacement cement with moist cured at 20oC, 27oC, and cured at site. The compressive strength and the Mercury intrusion porosimetry (MIP) test were done. The result indicates that the strength of concrete with GGBFS at early ages tend to be lower in comparison with the CS. However, the GGBFS reaction plays important roles at the later ages. The samples cured at higher temperature produce higher strength value. The total pore volume (TPV) of the concrete use GGBFS decreases with increasing age.
Przejdź do artykułu

Autorzy i Afiliacje

Abdul Chalid
1
  1. Senior Lectures Post Graduate of Civil Eng. Sangga Buana University, Jalan Surapati No. 189 Bandung-West Java 40123, Indonesia
13 Possibility of Big Data Application for OD-matrix Callibration in Transport Demand Models
Andrzej Brzeziński , Tomasz Dybicz
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 215-232 | DOI: 10.24425/ace.2021.136470
Słowa kluczowe: Big Data traffic modelling trip matrix trip distribution traffic forecast vehicle probe data
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Modern IT and telecommunications technologies create new possibilities of data acquisition for the needs of traffic analyses and transport planning. At the same time, the current experience suggests that it is becoming increasingly difficult to obtain data on interurban travels of people in a traditional way (among others, in Poland there has been no comprehensive survey of drivers on the sections of non-urban roads since 2006). Within the framework of the INMOP 3 research project, an attempt was made to analyse the use of the Big Data application possibilities including data from SIM cards of the mobile telephony operator [1] and data from probe vehicle data (also known as “floating car data”), as data sources for carrying out the traffic analyses and modelling of travels by all means of transport in Poland. The article presents the manner, in which the data were used, as well as methodological recommendations for creating transport models at the national, regional and local levels. Especially the results of work can be applied for systematic passenger cars trip matrix update
Przejdź do artykułu

Autorzy i Afiliacje

Andrzej Brzeziński
1
Tomasz Dybicz
1
  1. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
14 Censored Random Variable as a Form of Coping with Missing Data in Studying the Leachability of Heavy Metals from Hardening Slurries
Łukasz Szarek , Zbigniew Kledyński
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 233-247 | DOI: 10.24425/ace.2021.136471
Słowa kluczowe: missing data censored random variable censored distribution heavy metals leachability hardening slurries
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Missing data in test result tables can significantly impact the analysis quality, especially in relation to technical sciences, where the mechanism generating missing data is often non-random, and their presence depends on the non-observed part of studied variables. In such cases, the application of an inappropriate method for dealing with missing data will lead to bias in the estimated distribution parameters.
The article presents a relatively simple method to implement in dealing with missing data generated as a result of the MNAR mechanism, which utilizes the censored random variable. This procedure does not modify the variable distribution form, which is why it ensures objective and efficient estimation of distribution parameters within studies affected by certain restrictions of technical or physical nature (censored distribution), with a relatively low workload. Furthermore, it does not require the application of specialized software. A prerequisite for using this method is the knowledge of the frequency and cause of missing data.
The method for estimating the random variable censored distribution parameters was shown based on the example of studying the leachability of selected heavy metals from a hardening slurry. The analysis results were compared with classical methods for dealing with missing data, such as, ignoring missing data observations (listwise or pairwise deletion), single imputation and stochastic regressive imputation.
Przejdź do artykułu

Autorzy i Afiliacje

Łukasz Szarek
1
ORCID: ORCID
Zbigniew Kledyński
1
ORCID: ORCID
  1. Warsaw University of Technology, Faculty of Building Services, Hydro and Environmental Engineering, Nowowiejska 20, 00-653 Warsaw, Poland
15 Behaviour of Hot-Rolled Purlins Connected with Sandwich Panels
Marcin Górski , Aleksander Kozłowski
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 249-267 | DOI: 10.24425/ace.2021.136472
Słowa kluczowe: purlin lateral-torsional buckling sandwich panels FEM analysis
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The influence of sheeting made by sandwich panels on the lateral-torsional buckling resistance of hot rolled purlin was studied in this paper. The actual shear and torsional stiffness as well as resistance of connections between sandwich panel and purlins were considered in analysis. Parameters of these factors were determined using the finite element method, as well as by own experimental tests. Simple models with beam elements were used in LBA analysis to calculate the critical moments of the purlins. Advanced models with GMNIA analysis using shell elements was performed to simulate the behaviour of the purlins stabilized by sandwich panels. The results show that the stiffness of sheeting made by sandwich panels is insufficient to ensure the full protection of purlin against lateral-torsional buckling. The connections resistance also limited the ability of purlins stabilisation. Nevertheless including sandwich panels in purlin stability analysis results in a significant increase in their LTB resistance.
Przejdź do artykułu

Autorzy i Afiliacje

Marcin Górski
1
Aleksander Kozłowski
2
  1. Rzeszów University of Technology, Faculty of Civil and Environmental Engineering and Architecture, ul. Poznańska 2, 35-084 Rzeszów, Poland
  2. Rzeszów University of Technology, Faculty of Civil and Environmental Engineeringand Architecture, ul. Poznańska 2, 35-084 Rzeszów
16 Numerical Study of Block Tearing Failure in Steel Angles Connected by One Leg
Edyta Bernatowska , Lucjan Ślęczka
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 269-283 | DOI: 10.24425/ace.2021.136473
Słowa kluczowe: bolted connections block shear numerical analysis Gurson-Tvergaard-Needleman material model steel angles
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Block tearing is a failure mode of steel connections based on rupture of material. In this paper, a numerical model is developed to capture fracture initiation and progression until failure in steel angles connected by one leg using single row of bolts. It was realized using Gurson-Tvergaard-Needleman porous material model, which can accurately trace the behaviour of steel at plastic and ultimate range. Obtained results are validated on laboratory test results in global and local terms. Stress distribution along the failure paths in the gross and net area subjected to shear and tension was investigated for different geometrical arrangements of connections. Observation of rupture mechanisms allowed to compare the design procedures given in Eurocode 3 with connections behaviour. Results of analysis indicate that both plastic stress distribution in gross shear area and ultimate stress distribution in net shear area can limit block tearing resistance, which is consistent with the newest code provisions.
Przejdź do artykułu

Autorzy i Afiliacje

Edyta Bernatowska
1
ORCID: ORCID
Lucjan Ślęczka
1
ORCID: ORCID
  1. Rzeszow University of Technology, Faculty of Civil and Environmental Engineering and Architecture, Poznanska 2 Street, 35-084 Rzeszow,
17 Hybrid Predictions of the Homogenous Properties’ Market Value with the Use of Ann
Hubert Anysz , Monika Podwórna , Nabi Ibadov , Kunibert Lennerts , Kostiantyn Dikarev
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 285-301 | DOI: 10.24425/ace.2021.136474
Słowa kluczowe: real estate valuation ANN comparative approach machine learning hybrid models
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The homogenous properties – as flats are – have the set of key features that characterizes them. The area of a flat, the number of rooms and storey number where it is located, the technical state of a building, and the state of the vicinity of the blocks of flats assessed. The database comprises 222 flats with their transaction prices on the secondary estate market. The analysed flats are located in a certain quarter of Wrocław city in Poland. The database is large enough to apply machine learning for successful price predictions. Their close locations significantly lower the influence of clients’ assessments of the attractiveness of the location on the flat’s price. The hybrid approach is applied, where classifying precedes the solution of the regression problem. Dependently on the class of flats, the mean absolute percentage error achieved through the calculations presented in the article varies from 4,4 % to 7,8 %. In the classes of flats where the number of cases doesn’t allow for machine predicting, multivariate linear regression is applied. The reliable use of machine learning tools has proved that the automated valuation of homogenous types of properties can produce price predictions with the error low enough for real applications.
Przejdź do artykułu

Autorzy i Afiliacje

Hubert Anysz
1
ORCID: ORCID
Monika Podwórna
2
Nabi Ibadov
1
ORCID: ORCID
Kunibert Lennerts
3
Kostiantyn Dikarev
4
  1. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
  2. Wrocław University of Science and Technology, Faculty of Civil Engineering , Wyb. Wyspiańskiego 27, 50-370 Wrocław, Poland
  3. Karlsruhe Institute of Technology, Institute of Technology and Management in Construction, Gotthard-Franz-Street 3, 76131 Karlsruhe, Germany
  4. Prydniprovska State Academy of Civil Engineering and Architecture, Department of Construction Technology, 24a, Chernyshevskogo St., Dnipro, 49005, Ukraine
18 Time-to-Failure Forecast for Corroded Shell of Above-Ground Steel Tank Used to Store Liquid Fuels
Mariusz Maslak , Michał Pazdanowski
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 303-322 | DOI: 10.24425/ace.2021.136475
Słowa kluczowe: steel tank corroded shell failure probability durability prediction time-to-failure forecast remaining service time
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

An original simplified procedure to estimate the remaining service time of corroded shell of an on-the-ground steel tank used to store liquid fuels is presented in this paper. Current corrosion progress trend, identified a’posteriori based on the obligatory technical condition monitoring, is extrapolated to the future tank service time under the assumption that the conditions of service would not change and no renovation or modernization works would be undertaken. Failure probability understood as exhaustion of the capability to safely resist the loads applied due to the corrosion progress constitutes the measure of the sought uptime. For comparative purposes several effective inference methods have been proposed for the same input data, based on formally qualitatively different but corresponding description measures. It has been shown, that in the analysis of this type the representative values, usually expressed as quantiles of probability distributions describing random variables in use, need not be specified to verify the safety condition. The proposed algorithm is based on fully probabilistic considerations, and those, according to Authors’ opinion, by their nature lead to more reliable, and at the same time, objective estimates.
Przejdź do artykułu

Autorzy i Afiliacje

Mariusz Maslak
1
Michał Pazdanowski
1
ORCID: ORCID
  1. Cracow University of Technology, Faculty of Civil Engineering, Warszawska 24, 31-155 Cracow, Poland
19 Buckling Resistance of Quasi-Straight H-Section Beam-Columns under Unequal End Moments
Marian Antoni Giżejowski , Radosław Bronisław Szczerba , Zbigniew Stachura , Marcin Daniel Gajewski
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 323-348 | DOI: 10.24425/ace.2021.136476
Słowa kluczowe: General Method large displacements flexural-torsional buckling steel rolled H-section beam-column
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Steel prismatic elements of equal flanges double-tee section subject to major axis bending and compression, unrestrained in the out-of-plane direction between the supports, are vulnerable to buckling modes associated with minor axis flexural and torsional deformations. When end bending moments are acting alone on the quasi-straight member, the sensitivity to lateral-torsional buckling (LTB) is very much dependent upon the ratio of section minor axis to major axis moments of inertia, and additionally visibly dependent upon the major axis moment gradient ratio. In the case of major axis bending with the presence of a compressive axial force, even of rather small value in relation to the section squash resistance, there is a drastic reduction of structural elements in their realistic lengths to maintain a tendency to fail in the out-of-plane mode, governed by the large twist rotation. Increasing the load effects ratio of dimensionless axial force to dimensionless maximum major axis bending moment, the buckling mode goes away from that of lateral-torsional one, starting to become that closer to the minor axis flexural buckling (FBZ) mode. Different aspects of the flexural-torsional buckling (FTB) resistance of the typical rolled H-section beam-column with regard to the General Method (GM) formulation, developed by the authors elsewhere and based on the parametric finite element analysis, are dealt with in this paper. Investigations are concerned with different member slender ratio, different moment gradient ratios and different load effects ratio. Final conclusions are related to practical applications of the proposed format of General Method in relation to the effect of large displacements on the FTB resistance reduction factor described through the dimensionless measure of action effects and the FTB relative slenderness ratio of quasi-straight beam-columns.
Przejdź do artykułu

Autorzy i Afiliacje

Marian Antoni Giżejowski
1
Radosław Bronisław Szczerba
2
Zbigniew Stachura
2
Marcin Daniel Gajewski
2
  1. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
  2. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw
20 Analysis of Temperature-Field and Stressfield of Steel Plate Concrete Composite Shear Wall in Early Stage of Construction
Yun Sun , Yaojie Guo
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 351-366 | DOI: 10.24425/ace.2021.136477
Słowa kluczowe: steel plate concrete composite shear wall temperature field stress field thermal analysis cracking
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

To study the influence of temperature field and stress field on the cracking of the small thickness steel plate concrete composite shear wall (SPCW) in the early stage of construction. The temperature field and stress field of a 400 mm thickness SPCW was monitored and simulated through experimental research and numerical simulation. Moreover, a series of parameter analyses were carried out by using ANSYS to investigate the distribution of temperature field and stress field of SPCW. Based on the analysis results, some suggestions are put forward for controlling the cracking of SPCW in the early stage of construction. The results show that the temperature stress of 400 mm thickness SPCW in the early stage of construction is small, and there is no crack on the wall surface. For SPCW with thickness less than 800mm, the temperature stress caused by hydration heat in the early stage of construction is small, and the wall will not crack. The parameters such as wall thickness, steel plate thickness, boundary condition and stud space significantly influence the temperature field and stress field distribution of the small thickness SPCW in the early stage of construction, and reasonable maintenance measures can avoid cracking.
Przejdź do artykułu

Autorzy i Afiliacje

Yun Sun
1
ORCID: ORCID
Yaojie Guo
1
  1. Wuhan University, School of Civil Engineering, No.8 of Donghu South Road in Wuhan, Hubei, China
21 Subsoil Movements Forecasting Using 3D Numerical Modeling
Hanna Michalak , Paweł Przybysz
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 367-385 | DOI: 10.24425/ace.2021.136478
Słowa kluczowe: soil displacement 3D numerical modeling calibration of numerical models building subsidence deep building foundations buildings with multi-story undergrounds
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The design of new investments with underground floors in the downtown urban fabric calls for determining its impact on existing, often historic, neighboring facilities. The article presents the results of own research on 3D spatial arrangement numerical modeling of this type of investment. The scope of the research includes the analysis of neighboring buildings (including historic buildings), construction of the 3D numerical model, and calibration of the subsoil model taking into account the actual results of geodetic measurements. Own research as well as the completed housing development complex in Poland, downtown Warsaw, including data from project design and implementation documentation serve as the basis for research and analysis. As a result of said research and analysis, it was found that 3D computational models allow mapping of actual impacts within the designed new buildings and neighboring buildings, and as consequence - after appropriate calibration - a good reflection of soil displacements in the area of the planned investment. The knowledge of the anticipated values of soil displacements related to erecting new buildings is necessary at the design and implementation stages to ensure safety in all phases of works of existing buildings.
Przejdź do artykułu

Autorzy i Afiliacje

Hanna Michalak
1
ORCID: ORCID
Paweł Przybysz
1
  1. Warsaw University of Technology, Faculty of Architecture, 55 Koszykowa St, 00-659 Warsaw, Poland
22 Research on Launching Technology of Shield Tunnel in Ho Chi Minh Metro Line 1
Xuan Loi Nguyen , Li Wu , Khanh Tung Nguyen , Quang Anh Bui , Huy Hoang Nguen , Hoang Phuong Luu
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 387-401 | DOI: 10.24425/ace.2021.136479
Słowa kluczowe: HCM Metro Line 1 shield machine launching shaft soil improvement precipitation soft eye
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The use of subway tunnel engineering technology has become more professional and refined with the growth of society and the advancement of science and technology. The initial construction process of a subway tunnel shield is the most critical part of the entire engineering system. Shield launching period construction is the most prone to accidents in the shield construction process, directly related to the smooth through the shield tunnel. The line 1 of Ho Chi Minh (HCM) Metro is the first subway line, the full length of 19.7 km, the underground road length of 2.6 km from km 0 + 615 to km 2 + 360, from Ben Thanh market, and then through the Sai Gon river and 14 station (including 3 underground stations and 11 elevated stations), reach Suoi Tien park and is located in Long Binh area station, underground building blocks including Ben Thanh market station to Opera House station interval, Opera House station, Opera House station to Ba Son station interval. This paper selects Shield launching period of Opera House station to Ba Son shaft interval as an example, analyze the key construction technology, construction control parameters and launching considerations of shield machine.
Przejdź do artykułu

Autorzy i Afiliacje

Xuan Loi Nguyen
1
Li Wu
1
ORCID: ORCID
Khanh Tung Nguyen
2
Quang Anh Bui
2
Huy Hoang Nguen
2
Hoang Phuong Luu
3
  1. Faculty of Engineering, China University of Geosciences (Wuhan), No. 388 Lumo Road, Wuhan 430074, Hubei, P.R. China
  2. FECON UCC., JSC, 19th floors, CEO Tower, Lot HH2-1, Me Tri Ha Urban Area, Pham Hung road, Me Triward, Nam Tu Liem district, Hanoi city, Vietnam
  3. FECON., JSC, 14th floors, CEO Tower, Lot HH2-1, Me Tri Ha Urban Area, Pham Hung road, Me Tri ward, Nam Tu Liem district, Hanoi city, Vietnam
23 Stability and Vibrations of Micrononhomogeneous Plate Band Resting on Elastic Subsoil
Marek Chalecki , Grzegorz Jemielita
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 403-424 | DOI: 10.24425/ace.2021.136480
Słowa kluczowe: natural frequency buckling elastic subsoil displacement method
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The paper presents a procedure of calculation of natural frequencies and critical buckling forces of a micrononhomogeneous plate band resting on nonhomogeneous elastic subsoil and having any given boundary conditions. The band consists of N parts – cells [?] called elements, having a constant width l = L/N. Each band element consists of three parts – subelements with variable widths. The two of these subelements are matrix, the third – inclusion placed symmetrically relative to the matrix. Each band element is built of two isotropic materials. The matrix and inclusion bands have the stiffness and mass per area unit as well as they rest on the subsoil. The model has been derived with use of the classical displacement method. The stiffness matrix of any band element and then the band stiffness matrix have been built. An appropriate computer program has been written to calculate natural frequencies and critical buckling forces. A number of tests have been performed to check the working of the program and several calculative examples has been presented in the paper.
Przejdź do artykułu

Autorzy i Afiliacje

Marek Chalecki
1
ORCID: ORCID
Grzegorz Jemielita
2
  1. Faculty of Civil and Environmental Engineering, Warsaw University of Life Sciences, Nowoursynowska166, Warsaw, 02-787, Poland
  2. Faculty of Civil Engineering, Warsaw University of Technology, Armii Ludowej16, Warsaw, 00-637, Poland
24 Effect of Shear Reinforcement Ratio on The Shear Capacity of GFRP Reinforced Concrete Beams
Damian Szczech , Renata Kotynia
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 425-437 | DOI: 10.24425/ace.2021.136481
Słowa kluczowe: shear capacity GFRP bars concrete beams failure mode strain
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The paper presents results of experimental tests carried out on concrete beams reinforced with glass fibre polymer reinforced (GFRP) bars, which have become recently one of the main substitutes for traditional steel reinforcement. GFRP bars were used in this research as the longitudinal and transverse reinforcement. An objective of the study was to investigate the influence of the shear reinforcement ratio on the shear capacity of GFRP reinforced concrete beams in comparison with the corresponding beam without shear reinforcement. Single-span, simply-supported T-section beams reinforced in flexure with 5 GFRP bars of 25 mm diameter were reinforced in shear with closed GFRP stirrups of 8 mm diameter applied in three variable spacings: 250 mm, 200 mm and 120 mm. The analysis of test results, failure modes and shear capacity is discussed in the paper in respect to investigated parameters.
Przejdź do artykułu

Autorzy i Afiliacje

Damian Szczech
1
Renata Kotynia
1
ORCID: ORCID
  1. Lodz University of Technology, Faculty of Civil Engineering, Architecture and Environmental Engineering, al. Politechniki 6, 90-924 Łódź, Poland
25 Safety Evaluation of Turbo Roundabout Considering Autonomous Vehicles Operation
Alessandro Severino , Giuseppina Pappalardo , Salvatore Trubia
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 439-460 | DOI: 10.24425/ace.2021.136482
Słowa kluczowe: turbo-roundabouts surrogate measures traffic conflicts
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

A microsimulation approach was carried out in this paper to evaluate the safety performance of turbo roundabouts in which the "CAVs" of connected autonomous vehicles are mixed with the "CVs" of conventional vehicles the research aims to evaluate the advantages in terms of safety and performance of turbo roundabouts. The paper shall also lead to describe the methodological path followed to build VISSIM models of turbo roundabout changing O-D matrix as real case applications, to calibrate the simulation models, and to estimate the potential conflicts when the percentages of CAVs are introduced into the traffic mix. The results, in accordance with the existing bibliography, have shown that the safety levels and the parameters that determine an improvement in the service level in a turbo roundabouts are significantly influenced not only by the geometric characteristics, but also by the distribution of vehicular flows. Therefore, it follows that in absence of crash data including CAVs, the surrogate measures of safety must be considered a strong approach to evaluate the safety performance of a roundabout so far, any road entity.
Przejdź do artykułu

Autorzy i Afiliacje

Alessandro Severino
1
Giuseppina Pappalardo
1
Salvatore Trubia
2
  1. Faculty of Engineering and Architecture Polytechnic School, University of Catania, Viale Santa Sofia, 64 Ed 3, 95123 - Catania, Italy
  2. Faculty of Engineering and Architecture, University of Enna Kore, Cittadella Universitaria Viale delle Olimpiadi, Enna, Italy
26 Guidelines for the Use of Non-Standard Road Signs – Polish Experiences
Alessandro Calvi , Stanisław Gaca , Tomasz Kamiński , Mariusz Kieć , Mikołaj Kruszewski
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 461-479 | DOI: 10.24425/ace.2021.136483
Słowa kluczowe: road safety non-standard road signs driving simulator
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The aim of the paper is to present the procedure of non-standard road signs and markings implementation in Poland to improve road safety and traffic performance of road infrastructure. The authors investigated the following cases: road and its surroundings’ perception and understanding improvement; warning of increased risk of accidents ; road works; speed management and ITS. The procedure was developed on the basis of interdisciplinary research, including: observation of drivers behaviour in real traffic; comparative crash analysis on sections with and without non-standard signs or markings; surveys on the understanding signs and marking; driving simulator experiments. As a result of the research, an implementation procedure for non-standard signs and markings, in the form of flowchart, was developed. In the designed procedure the following study of non-standard signs can be distinguished: questionnaire studies, eye tracking tests and driving simulator tests. The choice of the test method depends on the preliminary assessment of sign understanding, based on the results of the questionnaires. Moreover, thresholds for the declared understanding level, which determines the selection of additional tests to be done prior to the implementation of the sign, are given. The guidelines for conducting tests, analysis and monitoring of implementation were described as well.
Przejdź do artykułu

Autorzy i Afiliacje

Alessandro Calvi
1
Stanisław Gaca
2
Tomasz Kamiński
3
ORCID: ORCID
Mariusz Kieć
2
Mikołaj Kruszewski
3
  1. Department of Engineering, Roma Tre University, Via Vito Volterra 62, 00-146 Rome, Italy
  2. Cracow University of Technology, Faculty of Civil Engineering, 24 Warszawska Str., 31-155 Cracow, Poland
  3. Motor Transport Institute, Transport Telematics Center, Jagiellońska 80 Str., 03-301 Warsaw, Poland
27 Experimental Investigation of Dynamic Behavior of Silty Sand
Ryszard Chmielewski , Leopold Kruszka , Ryszard Rekucki , Kamil Sobczyk
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 481-498 | DOI: 10.24425/ace.2021.136484
Słowa kluczowe: soil mechanics experimental dynamic testing split Hopkinson pressure bar oedometric test
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The paper includes experimental research using the Split Hopkinson Pressure Bar to determine dynamic compression curves and strength dynamic parameters to depend on the strain rate and moisture for silty sand soil samples. Those experiments are oedometric type based in a rigid confining cylinder. Samples of silty sand with fine a fraction content were taken for the study. To ensure sufficiently uniaxial strain of the tested material, the soil samples were placed in properly prepared casings made of duralumin for the needs of the tests. Thanks to the use of measuring strain gauges on the initiating and transmitting bars, as well as the casing, the nature of the loading pulse was obtained, which was then subjected to the process of filtration and data processing to obtain the nature of the incident, reflected and transmitted wave. During the above dynamic experiments with the representative of silty sand soils, it was observed that its dynamic compaction at a high strain rate is different than in the case of the Proctor test. This is due to higher compaction energy, which additionally changes the grain size by destroying the grains in the structure. The paper presents the results of particle size distribution analysis for two different types of soil samples - this type of analysis is unique. Hence experiments should be further continued for such soils with different granulations and various moisture using, for example, Hopkinson measuring bar technique to confirm for other silty sand soils that are often subgrade of various engineering objects.
Przejdź do artykułu

Autorzy i Afiliacje

Ryszard Chmielewski
1
ORCID: ORCID
Leopold Kruszka
1
ORCID: ORCID
Ryszard Rekucki
1
Kamil Sobczyk
1
  1. Military University of Technology, Dept. of Military Engineering and Military Infrastructure, 2 Gen. Sylwester Kaliski Str., 00-908 Warsaw, Poland
28 Recycling Waste Rubber Tyres in Road Construction
Ivana Barišić , Matija Zvonarić , Ivanka Netinger Grubeša , Sanja Šurdonja
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 499-512 | DOI: 10.24425/ace.2021.136485
Słowa kluczowe: road construction pavement waste rubber cement stabilized course
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Road construction relies on natural material exploitation and it is necessary to find new ways of reducing its negative environmental impact. Simultaneously, number of tyres placed on Croatian (and world) market is constantly growing and the need for waste tyres management will begin to increase due to the wear and tear of tyres in use at the moment. This paper presents a review of latest international and domestic researches on waste rubber application in road construction with special emphasize on Croatian researches within this topic. Preliminary results of ongoing research on waste rubber application in cement bound mixtures are also presented.
Przejdź do artykułu

Autorzy i Afiliacje

Ivana Barišić
1
Matija Zvonarić
1
Ivanka Netinger Grubeša
2
Sanja Šurdonja
3
  1. Department for Geotechnics, Road Construction and Geodesy, Faculty of Civil Engineering and Architecture Osijek, University of Osijek, Vladimira Preloga 3, Osijek, Croatia
  2. Department for Materials and Constructions, Faculty of Civil Engineering and Architecture Osijek, University of Osijek, Vladimira Preloga 3, Osijek, Croatia
  3. University of Rijeka, Faculty of Civil Engineering, Croatia
29 Structuration Investigation of Fast - Setting Self Leveling Underlayment Based on Ettringite Binder
Lam Ngoc Nguen
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 513-525 | DOI: 10.24425/ace.2021.136486
Słowa kluczowe: Structuration Self-levelling underlayment Fast-setting Ettringite
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Self – Levelling Underlayment (SLU) is one of the high-performance new materials used in the construction industry. Besides the strength, other characteristics of SLU such as workability, rapid drying, rapid hardening, shrinkage compensation, smooth nature, etc. are required depending on the application. The aim of this study is to evaluate the structuration with the time of SLU through some important characteristics such as the evolution of rheological properties, ettringite, and gibbsite phase development. To this purpose, a rheometer with rotation mode and oscillation mode was used to determine the yield stress, plastic viscosity, rheological dynamic modulus (storage modulus and loss modulus). The use of these techniques is considered to be a method for monitoring structuration development in cement materials. The result shows that during the hydration process, increased plastic viscosity, yield stress, and dynamic modulus of the SLU were identified from just 5 minutes after mixing until the setting period when the transition from a fluid state to a solid-state of SLU takes place. By using a rheometer in oscillation mode, the beginning of the transition process from the liquid-state to the solid-state of SLU was identified, this method is more precise when compared to traditional Vicat method.
Przejdź do artykułu

Autorzy i Afiliacje

Lam Ngoc Nguen
1
  1. Hanoi University of Civil Engineering, Faculty of Building Materials, 55 Giai Phong Road, Hai Ba Trung District, Hanoi, Viet Nam
30 The Use of Sand Columns in the Reinforcement of Weak Layers in Road Engineering
Sami Mohammed Ayyad , Omar Asad Ahmad
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 527-538 | DOI: 10.24425/ace.2021.136487
Słowa kluczowe: sand-filled piles relative deformation rebuilding roads
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

It is an established fact that when roads are planned and constructed, consideration needs to be given to ensuring the strength of the road surface. It is, however, also the case that when an existing road is being rebuilt or is under maintenance, its base may need to be fortified to increase the road’s vehicle-carrying capacity. The base may, for example, contain a high proportion of weak soil that would be difficult, time-consuming, and costly to remove. This paper aims to investigate the efficacy of using sand-filled piles to reduce road deformation. Experiments conducted on sponge samples confirm that there is a relationship between the total area of sand-filled piles and relative reduction in deformation. It finds that the relationship is non-linear, but that the relationship can be made linear by adjusting the area of sand-filled piles. When the area of sand-filled piles increases from 7.8% to 19.4%, the deformation module can change by up to 100%. Relative reduction in deformation can change from 14% to 45.5% when the area of sand-filled piles increases from 7.8% to 11.7%. The maximum reduction in deformation – 92.4% - occurs when the area of sand-filled piles exceeds 19.5%. Changing the loads borne also affects the deformation module. This paper found that when there was a 10 to 15kg load, and the number of sandfilled piles was increased, there was a change in the deformation module by 380-470%. When there was only a 5kg load on the sample, and the number of sand-filled piles was increased, there was a change in the deformation module by up to 1217%.
Przejdź do artykułu

Autorzy i Afiliacje

Sami Mohammed Ayyad
1
Omar Asad Ahmad
1
ORCID: ORCID
  1. Amman Arab University, Faculty of Civil Engineering, Civil Engineering Department; Amman, Jordan Street–Mubis, 11953, Jordan,
31 On the Columns Buckling Length of Unbraced Steel Frames with Semi-Rigid Joints
Przemysław Krystosik
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 539-556 | DOI: 10.24425/ace.2021.136488
Słowa kluczowe: stability unbraced steel frame buckling length semi-rigid joints
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The paper presents the issue of unbraced and semi-rigid steel frames stability with special attention paid to the determination problem of columns buckling length Lcr in these frames. The paper discusses ways of buckling length determination in frames columns with the use of well known, European and American standard procedures, as well as numerical method of stability analysis based on the Finite Element Method (FEM). The presented procedures and analysis methods in calculations of certain steel frames with semi-rigid joints were used. On the basis of obtained results, it has been shown that in many practical cases, the simplified standard procedures of columns buckling length determination can give the results burdened with errors. These errors can have a significant influence on accuracy of columns resistance calculations. The issues presented in the paper are very important from the practical point of view, and according to the author, they can be used in the practical design of unbraced steel frames.
Przejdź do artykułu

Autorzy i Afiliacje

Przemysław Krystosik
1
  1. Koszalin University of Technology, Faculty of Civil Engineering, Environmental and Geodetic Sciences, Śniadeckich 2, 75-453 Koszalin, Poland,
32 Evaluation of the Possibility of Reduction of Highly Modified Binders Technological Temperatures
Marta Pucułek , Adam Liphardt , Piotr Radziszewski
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 557-570 | DOI: 10.24425/ace.2021.136489
Słowa kluczowe: highly modified binder process temperatures dynamic viscosity MSCR test Bio-flux
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The article presents results of research on the possibility of reduction of technological temperatures of highly modified binders by using as an additive a fluxing agent of plant origin, developed at the Warsaw University of Technology. The work presents the results of dynamic viscosity tests within the temperature range of 90°C to 180°C for original binders and binders aged using the RTFOT method, modified by adding a fluxing agent of plant origin. On the basis of dynamic viscosity test results, process temperatures for production and compaction of mineral-asphalt mixes with the binding agents being analyzed. Moreover, characteristics of binders were assessed, which define their behavior under high technological temperatures on the basis of multiple stress creep recovery (MSCR) tests.
The research results obtained indicate that it is possible to reduce the process temperatures of mineral-asphalt mixes with highly modified binders by liquefying the binder with an additive of plant origin while retaining high resistance to permanent deformations. The MSCR test results prove that mineral-asphalt mixes containing binders highly modified with additives of plant origin can meet the requirements for extremely high traffic loads.
Przejdź do artykułu

Autorzy i Afiliacje

Marta Pucułek
1
Adam Liphardt
1
Piotr Radziszewski
1
  1. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
33 Secondary Treated Wastewater as a Concrete Component and its Impact on the Basic Strength Properties of the Material
Omar Asad Ahmad , Sami Mohammed Ayyad
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 571-583 | DOI: 10.24425/ace.2021.136490
Słowa kluczowe: secondary treated wastewater tensile strength potable water mechanical properties of concrete
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

In Jordan, the unprecedented proliferation of building projects is anticipated to increase the potable water demand in the construction manufacturing. In the present work, secondary treated wastewater (STW) and potable water (PW) were used in the production of concrete mixes, which were subjected to testing after 3 to 28 days of curing to determine how the, mechanical properties of concrete was affected by the addition of secondary treated wastewater in various proportions (25-100%). Results indicated that the use of 25% and 75% of secondary treated wastewater in concrete production increased the compressive strength to 39 MPa after 28 days of curing. A more noticeable increment was recorded in tensile strength, which was double that achieved with the standard design. Overall, the compressive strength increased by 21.95% when secondary treated wastewater was used, while the expenditure related to water usage was halved. Furthermore, there was consistency between the results obtained from scaling up to actual ready-mix concrete production and the results of the empirical work.
Przejdź do artykułu

Autorzy i Afiliacje

Omar Asad Ahmad
1
ORCID: ORCID
Sami Mohammed Ayyad
1
  1. Amman Arab University, Faculty of Civil Engineering, Civil Engineering Department; Amman, Jordan Street–Mubis, 11953, Jordan,
34 Technical and Cost Comparison of Selected Technologies for Energetic Conversions of Renewable Energy Sources
Wojciech Drozd , Marcin Kowalik
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 585-598 | DOI: 10.24425/ace.2021.136491
Słowa kluczowe: renewable energy sources (RES) conversion methods photovoltaics wind farms comparison
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The authors of this article were guided by the desire to show the profitability of using renewable energy sources and to facilitate decisions for future investors as to their choice. The article classifies energy sources and methods for converting renewable energy sources (RES) and presents a technical comparison of two electricity supply systems: a photovoltaic system and a household wind farm for a selected building. A residential, single-family building, inhabited by a family of three, was adopted for analysis. Photovoltaics, the use of solar radiation energy to produce electricity, is classified next to wind farms as the most dynamically developing renewable energy technology. When analysing in terms of technology renewable conversion methods that provide us with electricity, the better installation is the photovoltaic installation. By analysing the cost of renewable energy conversion technologies that provide us with electricity, the photovoltaic system becomes more beneficial, because with a similar investment price we get a much shorter payback period than in the case of a backyard wind power station.
Przejdź do artykułu

Autorzy i Afiliacje

Wojciech Drozd
1
ORCID: ORCID
Marcin Kowalik
1
ORCID: ORCID
  1. Department of Construction Management, Tadeusz Kościuszko Cracow University of Technology, Warszawska 24 St., 31-155 Kraków, Poland
35 Analysis of Positive Elevation Effect and Prediction of Vibration Velocity of Bench Blasting Vibration
X.J. Zhang , H.M. An
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 599-618 | DOI: 10.24425/ace.2021.136492
Słowa kluczowe: Blasting Vibration positive elevation effect step (positive) formula
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Accurate prediction of blasting vibration should be achieved in mine blasting production practice. It is also a critical problem in the field of blasting vibration control technology research. In this research paper, on the basis of the previous research results and taking account into the reflection principle of elastic wave at the free interface, the authours proposes the blasting seismic wave propagation model. In addition, the blasting positive elevation effect are theoretically explained in detail, and the vibration velocity prediction formula of the positive elevation effect is derived. Finally, the positive elevation effect mechanism and the step (positive) formula are calibrated based on the on-site monitoring data of blasting vibration of Qipanjing Jinou coal mine. In beirf, a theoretical basis is laid by this paper for similar blasting projects.
Przejdź do artykułu

Autorzy i Afiliacje

X.J. Zhang
1
H.M. An
2
  1. School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083, China
  2. Kunming University of Science and Technology, Faculty of Public Security and Emergency Management, 650093, Kunming, China
36 Application and Comparison of Different Methods for Traffic Conflict Analysis – Case Study on 2+1 Roads
Salvatore Cafiso , Alessandro Calvi , Carmelo D'Agostino , Mariusz Kieć , Gianmarco Petrucci , Piotr Szagała
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 619-634 | DOI: 10.24425/ace.2021.136493
Słowa kluczowe: surrogate measures of safety road safety SSAM passing lane 2+1 road
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Safety Performance Functions and Crash Modification Factors are statistically-based prediction methods that require significant efforts and long periods in crash data collection. Traffic conflict studies can mitigate this issue using a short time survey to measure the number and severity of traffic conflicts, which are regarded as surrogate safety measures. Unfortunately, they are empirical studies that can be carried out only after the implementation of a treatment. The overall objective of the present research is to investigate the performance of different methods for conflict detection and classification, considering the observed conflicts on 2+1 roads in Poland. Observations were compared with conflicts detected in simulated environments. The latter include either the Agent-Based Microsimulation (ABM) approach, or the virtual reality simulation using a Driving Simulator (DS). Conflicts were detected and classified based on video recording and analysis of vehicle trajectories in the merging area of 2+1 roads. The studies focused only on lane-changing conflicts. Locations, Post Encroachment Time and Time to Collision values of observed conflicts between vehicles were subsequently identified. Observed conflicts were compared with the ones resulting from ABM and DS, to determine whether there is a correlation between them.
Przejdź do artykułu

Autorzy i Afiliacje

Salvatore Cafiso
1
ORCID: ORCID
Alessandro Calvi
2
Carmelo D'Agostino
3
Mariusz Kieć
4
Gianmarco Petrucci
5
Piotr Szagała
6
  1. University of Catania, Department of Civil Engineering & Architecture, Via Santa Sofia 64, I-95125 Catania, Italy
  2. Roma Tre University, Department of Engineering, Via Vito Volterra 62, I-00146 Rome, Italy
  3. Lund University, Department of Technology and Society, John Ericssons väg 1, 223 63 Lund, Sweden
  4. Cracow University of Technology, Faculty of Civil Engineering, 24 Warszawska Str., 31-155 Cracow, Poland
  5. Donati S.p.A., via Aurelia Antica 272, I-00165 Rome, Italy
  6. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
37 Elastic Flexural-Torsional Buckling of Steel I-Section Members Unrestrained Between End Supports
Marian Antoni Giżejowski , Anna Maria Barszcz , Zbigniew Stachura
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 635-656 | DOI: 10.24425/ace.2021.136494
Słowa kluczowe: steel member bisymmetric I-section elastic behaviour lateral-torsional buckling classical energy equation flexural-torsional buckling
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Elastic instability of steel I-section members has been investigated with regard to axial compression, major axis bending as well as compression and major axis bending, based on the Vlasov theory of thin-walled members. Investigations presented in this paper deal with the energy method applied to the flexural-torsional buckling (FTB) problems of any complex loading case that for convenience of predictions is treated as a superposition of symmetric and antisymmetric components. Firstly, the review of energy equation formulations is presented for the elastic lateral-torsional buckling (LTB) of beams, then the most accurate beam energy equation, so-called the classical energy equation formulated for bisymmetric I-section beams is extended to cover also the beam-column out-of-plane stability problems, referred hereafter to FTB problems. Secondly, for the simple end boundary conditions, the shape functions of twist rotation and minor axis displacement are chosen such that they cover both symmetric and antisymmetric lateral-torsional buckling modes in relation to two lowest eigenvalues of the beam LTB in major axis bending. Finally, the explicit form of the general solution is presented being dependent upon the dimensionless bending moment equations for symmetric and antisymmetric components, and the load factor where the lower k index identifies the load case.
Przejdź do artykułu

Autorzy i Afiliacje

Marian Antoni Giżejowski
1
Anna Maria Barszcz
1
Zbigniew Stachura
2
  1. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
  2. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw
38 Shear Stresses of Hollow Lightweight Concrete Beams Made with Wood Waste
Salam Salman Chiad Alharishawi , Nagham Rajaa , Lina Abdulsalam Shihab
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 657-672 | DOI: 10.24425/ace.2021.136495
Słowa kluczowe: Reinforced lightweight concrete hollow beams flexural behavior shear behavior cracks hollow lightweight concrete (HLC) solid lightweight concrete (SLC)
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Hollow Lightweight Concrete (HLC) beams are gaining popularity due to low cost and low weight as compared with the Solid Lightweight Concrete (SLC) beams. HLC and SLC beams decrease in weight, without losing strength and durability. Flexural and shear behavior of reinforced HLC and SLC beams made with sawdust under two-point load is investigated in this study. The ultimate deformation efficiency and shear resistant mechanism of HLC beams are discussed experimentally and compared with other SLC beams. The beams, tested in this research, are rectangular. Beams were designed and constructed as 12 * 23 * 100 cm. Six concrete beam models were prepared including three SLC beams without the hollow and the other three HLC beams poured hollow 50 * 7.5 cm throughout the all beam of 100 cm. All beams were split according to the distance between vertical stirrups, these stirrups were divided into three specimens 45, 13, and 6 cm. By analyzing six experimental test beams, in this research, investigated the effect of diverse factors on the shear of beams. On comparison with normal concrete beams, this work describes the failure of mechanism, process, and ductility. The first crack loads, ultimate loads, load-deflection behavior, crack patterns and shapes of failure were investigated in this study. The experimental results show the ultimate performance of HLC beams are pure shear and controlled by yielding tension and compression steel bars. Also, it is found that the measured size and configuration of the hollow opening had an effect on the load-carry capacity and mid-span deflection of HLC beams. Thus, the design and construction details of beams can be additionally customized to reduce the total cost and weight of the HLC beams.
Przejdź do artykułu

Autorzy i Afiliacje

Salam Salman Chiad Alharishawi
1
ORCID: ORCID
Nagham Rajaa
2
ORCID: ORCID
Lina Abdulsalam Shihab
3
  1. Mustansiriyah University, College of Engineering, Environmental Engineering Department, Baghdad, Iraq
  2. Mustansiriyah University, College of Engineering, Highway and Transportation Engineering Department, Baghdad, Iraq
  3. Mustansiriyah University, College of Engineering, Civil Engineering Department, Baghdad, Iraq
39 Deflections of Steel Plate-Concrete Composite Beams in the Light of Experimental Studies
Dawid Kisała , Kazimierz Furtak
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 673-688 | DOI: 10.24425/ace.2021.136496
Słowa kluczowe: deflection composite beam
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

A method of calculating the deflections of steel plate-concrete composite beams is proposed. In the hybrid work of such beams the properties of reinforced concrete and composite structures are combined. This convention should be followed in considering their ultimate capacity and serviceability limit state. The proposed solution has been verified in experimental studies performed by the authors. Good compatibility of theoretical calculations and experimental results has been obtained. It allows the theoretical solution to be used in the analysis of other cases with parameters different than those of the discussed beams. In the experiments done by the author six beams of total length of 5.20 m and theoretical length of 5,00 m were used. The cross section was rectangular, 0.24 m in width and 0.49 m in height. The steel plate 4.74 m long was 6.10 and 16 mm thick. The diameter of the flexible connectors was 13 mm. Their spacing varied between 80 and 200 mm. Owing to the flexibility of the connectors the interface slip between the steel and concrete parts was included in the theoretical solutions. The results of an in-depth analysis indicate that the deflections of steel plate-concrete composite beams are affected by the compressive strength of concrete and the yield point of steel as well as connectors’ diameter and spacing. This impact varies, that of the yield point of the steel from which the plate is made being the highest.
Przejdź do artykułu

Autorzy i Afiliacje

Dawid Kisała
1
Kazimierz Furtak
1
ORCID: ORCID
  1. Department of Bridge and Tunnel Building, Tadeusz Kościuszko Cracow University of Technology, Warszawska 24 St., 31-155 Kraków, Poland
40 Agile/Flexible and Lean Management in Ready-Mix Concrete Delivery
Jerzy Pasławski , Tomasz Rudnicki
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 689-709 | DOI: 10.24425/ace.2021.136497
Słowa kluczowe: Agile/Flexible Lean highway construction simulation RMC delivery real time management
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The aim of the article is indicating the advantages of utilizing the synergy obtained by introducing two management methods: Lean Construction and Agile Management using the example of the process of deliveries of concrete mix in road construction. Despite the seemingly contradictory assumptions (Lean Management aims at limiting wastefulness and maximizing the value for the customer and agile management serves for creating the possibility for fast, effective response to non-expected changes thanks to the adopted strategy of flexibility, which usually requires engaging additional resources), both management methods deliver the effect of increasing the effectiveness of the machine laying the pavement. Using a “spaghetti diagram” (one of the tools of Lean Management) led to limiting the time losses during loading and unloading the concrete mix destined for constructing highway pavement. On the other hand, the tactic of technological flexibility in the form of a modification of the concrete mix allowed for broadening the time frame for the delivery of concrete to the construction site to as much as two hours. Moreover, applying the real time delivery management system (in accordance with the assumptions of Construction 4.0) created the possibilities for ensuring quick reacting to the changing conditions of delivery and laying the concrete mix in the pavement and ensuring the appropriate functioning of the machine laying the pavement. The presented examples indicated the advantages of the suggested concept in reference to the traditional solution.
Przejdź do artykułu

Autorzy i Afiliacje

Jerzy Pasławski
1
Tomasz Rudnicki
2
ORCID: ORCID
  1. Poznan University of Technology, Faculty of Civil and Transport Engineering, ul.Piotrowo 5, 60-965 Poznan, Poland
  2. Faculty of Civil Engineering and Geodesy, Military University of Technology in Warsaw, 2 Gen. S.Kaliskiego St., 01-476 Warsaw, Poland
41 Multi-Criteria Assessment of Lean Management Tools Selection in Construction
Piotr Nowotarski , Jerzy Pasławski , Patrick Dallasega
Archives of Civil Engineering | 2021 | vol. 67 | No 1 | 711-726 | DOI: 10.24425/ace.2021.136498
Słowa kluczowe: Lean Management Lean Construction AHP SMEs
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The situation on the construction market is difficult. One way to improve it can be to implement modern methods and techniques related to the lean management in construction. The article presents an algorithm supporting the selection of appropriate Lean Management tools and techniques for construction companies using AHP method. The efficiency of the proposed algorithm is illustrated by a case study consisting of a small construction company performing insulation works in a multifamily house. The presented approach is part of the broader research work carried out by the authors in the field of improving construction processes and verifying the efficiency and effectiveness of Lean Management methods and techniques construction works.
Przejdź do artykułu

Autorzy i Afiliacje

Piotr Nowotarski
1
Jerzy Pasławski
1
Patrick Dallasega
2
  1. Poznań University of Technology, Faculty of Civil Engineering and Transport, Piotrowo 5, 61-139 Poznań, Poland
  2. Free University of Bolzano, Faculty of Science and Technology, piazza Università, 539100 Bozen-Bolzano, Italy

Zasady etyki publikacyjnej

ETHICS POLICY

”Archives of Civil Engineering” respects and promotes the principles of publishing ethics. Being guided by COPE’s Guidelines ( https://publicationethics.org/resources/guidelines) we ensure that all participants of the publishing process comply with these rules, the journal pays special attention to:

Editor Responsibilities
1. Qualifying individual manuscripts for publication only on the basis of: (a) compliance with the guidelines provided to the authors, (b) substantive value, (c) originality, (d) transparency of presentation
2. Deciding whether the paper fulfills all requirements i.e. formal and scientific and which articles submitted to the journal should be published. In making these decisions, the editor may be guided by the policies of the journal’s editorial board as well as by legal requirements regarding libel, copyright infringement, and plagiarism.
3. Evaluating manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s).
4. Ensuring scientific accuracy and complying with the principle of authorship; making sure that individual authors who contribute to the publication accept its form after the scientific editing
5. Providing a fair and appropriate peer review process.
6. Withdrawing manuscripts from publication, if any information about its unreliability appeared, also as a result of unintentional errors, features of plagiarism or violation of the rules of publishing ethics were identified.
7. Requiring all contributors to disclose relevant competing interests and publish corrections if competing interests are revealed after publication. If needed, other appropriate action should be taken, such as the publication of a retraction or expression of concern.
8. Maintaining the integrity of the academic record, precludes business needs from compromising intellectual and ethical standards, and is always willing to publish corrections, clarifications, retractions, and apologies when needed.
9. Not disclosing any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.

Reviewer Responsibilities
1. Cooperating with the scientific editor and / or editorial office and the authors in the field of improving the reviewed material;
2. Being objective and expressing the views clearly with appropriate supporting arguments.
3. Assessing of the entrusted works in a careful and objective manner, if possible with an assessment of their scientific reliability and with appropriate justification of the comments submitted;
4. identifying relevant published work that has not been cited by the authors
5. calling to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published data of which they have personal knowledge
6. Maintaining the principle of fair play, excluding personal criticism of the author (s)
7. Maintaining confidentiality, which is not showing or discussing with others except those authorized by the editor. Any manuscripts received for review are treated as confidential documents.
8. Performing a review within the set time limit or accepting another solution jointly with ACE in the event of failure to meet this deadline.
9. Notifying the editor if the invited reviewer feels unqualified to review the manuscript or knows that its timely review will be impossible.
10. identifying relevant published work that has not been cited by the authors
11. Not considering evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the submission.

Author Responsibilities
1. Results of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the manuscript. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable.
2. The authors should follow the principle of originality, which is submitting only their own original works, and in the case of using the works of other authors, marking them in accordance with the rules of quotation, or obtaining consent for the publication of previously published materials from their owners or administrators;
3. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Parallel submission of the same manuscript to more than one journal constitutes unethical publishing behaviour and is unacceptable.
4. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study and phenomena such as ghostwriting or guest authorship in the event of their detection must be actively counteracted.
5. All authors should report in a Reliable manner the sources they used to create their own study and their inclusion in the attachment bibliography;
6. All those who have made significant contributions should be listed as co-authors. Where there are others who have participated in certain substantive aspects of the research project, they should be named in an Acknowledgement section.
7. The corresponding author should ensure that all appropriate co-authors (according to the above definition) and no inappropriate co-authors are included in the author list of the manuscript, and that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication.
8. All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or their interpretation in the manuscript. All sources of financial support for the project should be disclosed.
9. When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal’s editor or publisher and cooperate with them to either retract the paper or to publish an appropriate erratum.

Publisher’s Confirmation
In cases of alleged or proven scientific misconduct, fraudulent publication or plagiarism the publisher, in close collaboration with the editors, will take all appropriate measures to clarify the situation and to amend the article in question. This includes the prompt publication of an erratum or, in the most severe cases, the complete retraction of the affected work.

Procedura recenzowania

Manuscript Peer-Review Procedure

”Archives of Civil Engineering” makes sure to provide transparent policies for peer-review, and reviewers have an obligation to conduct reviews in an ethical and accountable manner. There is clear communication between the journal and the reviewers which facilitates consistent, fair, and timely review.

-The model of peer-review is double-blind: the reviewers do not know the names of the authors, and the authors do not know who reviewed their manuscript (but if the research is published reviewers can eventually know the names of the authors). A complete list of reviewers is published in a traditional version of the journal: in-print.
-It is the editor who appoints two reviewers; however, if there are discrepancies in the assessment the third reviewer can be appointed.
-After having accepted to review the manuscript (one-week deadline), the reviewers have approximately 6 weeks to finish the process.
-The paper is published in ACE provided that the reviews are positive. All manuscripts receive grades from 1-5, 5 being positive, 1 negative, the authors receive reviews to read and consider the comments.
-Manuscript evaluations are assigned one of five outcomes: accept without changes, accept after changes suggested by the reviewer, rate manuscript once again after major changes and another review, reject, withdraw.
-Manuscripts requiring minor revision (accept after changes suggested by the reviewer) does not require a second review. All manuscripts receiving a "Rate manuscript once again after major changes and another review " evaluation must be subjected to a second review. Rejected manuscripts are given no further consideration. There are cases when the article can be withdrawn, often upon the request of an author, technical reason (e.g. names of authors are placed in the text, lack of references, or inappropriate structure of the text), or plagiarism.
-The revised version of the manuscript should be uploaded to the Editorial System within six weeks. If the author(s) failed to make satisfactory changes, the manuscript is rejected.
-On acceptance, manuscripts are subject to editorial amendment to suit house style.
-Paper publication requires the author's final approval.
- As soon as the publication appears in print and in electronic forms on the Internet there is no possibility to change the content of the article.

Editor’s responsibilities
-The editor decides whether the paper fulfills all requirements i.e. formal and scientific and which articles submitted to the journal should be published.
-In making these decisions, the editor may be guided by the policies of the journal’s editorial board as well as by legal requirements regarding libel, copyright infringement, and plagiarism.
-The editor maintains the integrity of the academic record, precludes business needs from compromising intellectual and ethical standards, and is always willing to publish corrections, clarifications, retractions, and apologies when needed.
-The editor evaluates manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s).
-The editor does not disclose any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.

Reviewers' responsibilities
Any manuscripts received for review are treated as confidential documents. They must not be shown to or discussed with others except if authorized by the editor. Privileged information or ideas obtained through peer review is kept confidential and not used for personal advantage Any invited reviewer who feels unqualified to review the manuscript or knows that its timely review will be impossible should immediately notify the editor so that alternative reviewers can be contacted. Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published data of which they have personal knowledge. Reviewers should not consider evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the submission. Reviews should be conducted objectively. Personal criticism of the author is unacceptable. Referees should express their views clearly with appropriate supporting arguments. All reviews must be carried out on a special form available in the Editorial System.

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji