The preliminary stage of asphalt mixture production involves the drying and dedusting of coarse aggregates. The most common types of coarse aggregates used are limestone and basalt. In the process of drying and dedusting the dryer filter accumulates large quantities of waste in the form of mineral powder.
This paper introduces an investigation into limestone powder waste as a potential microfiller of polymer composites. Physical characteristics such as the granulation the of powder collected from the filter - in terms of the season of its collection and the type of input materials used - were analysed. A scanning electron microscope (SEM) was used for the investigation described within this paper. The obtained results were compared against those of other materials which can be used as polymer composites microfillers.
One of the consequences of the dynamic technological development is the rapidly increasing amount of electro-waste (WEEE, e-waste). Because there are no uniform legal regulations regarding the ways of collecting such waste, the separate-collection systems used in various areas are not homogeneous, and they usually also differ in effectiveness. The aim of this study was to evaluate the electro-waste collection system implemented in Lublin (the largest city in Eastern Poland). Taking into account the fact that the reliability of a collection system depends on the degree of its adaptation to the functions it performs, the evaluation consisted in determining how big a problem improper electro-waste segregation was. The article presents the results of a study of the causes of citizens’ failure to properly manage e-waste and indicates what measures should be taken to amend the problem. During two research steps, 347 pieces of e-waste with a total weight of 77.218 kg were found in the analyzed waste samples (0.33% of all samples). This means that the mechanisms of selective e-waste collection still do not work correctly, despite the ten years of Poland’s membership in the EU and implementation of European legislation in this area. The fact that residents throw away electric waste into municipal mixed waste containers poses a serious problem for proper waste management – even if only a part of the e-waste is disposed in this illegal way. This indicates the necessity of improving waste collection (more frequent waste reception, convenient access to e-waste containers, raising public awareness, etc.).
For years, the Polish hard coal mining has been struggling with the problem of fire hazards in
areas with coal residue, mainly in goafs. Currently, a common method of limiting this hazard is the
fire prevention involving use of fine-grained hydromixtures based on power generation waste, mainly
fly ashes. The hydromixture is introduced into the caving zone created by the advancement of exploitation
face and its task is to fill in voids, limiting the possibility of access to the mine air oxygen to
a minimum. The first part of the article presents theoretical fundamentals of determining the parameters
of gravitational hydraulic transport of water and ash hydromixtures used in the mining pipeline
systems. Each hydromixture produced based on fine-grained wastes is characterized by specified
rheological parameters that have a direct impact on the future flow parameters of a given pipeline
system. Additionally, the gravitational character of the hydraulic transport generates certain limitations
concerning the so-called correct hydraulic profile of the system in relation to the applied hydromixture
characterized by required rheological parameters that should ensure safe flow at a correct
efficiency. This paper shows an example of optimisation of the composition of a selected fly ash-water
hydromixture in relation to its capacity for hydrotransport in gravity pipeline installations, as well as
the amount of excess water that will always drain from the location of feeding the hydromixture to
the underground workings.
In this study the current legal and market conditions of waste management in Poland are analyzed. The main legal basis for changes in the national municipal waste management system and their impact on the market situation in the last few years have been determined. Additionally, the important function of the selective collection and the key role of the separation of raw material fractions in waste sorting plants constituting the basis for the operation of Regional Municipal Waste Processing (RMWP) plants was underlined. Furthermore, the possibilities of developing electricity production technology in low and medium power modules using waste gasification techniques were emphasized. The stream of plastic mixture from municipal waste sorting was identified as problematic in the context of effective material recovery. Tests were conducted on the morphology of this waste stream from two sorting plants. In line with the literature data and as part of the analytical work, the properties of the plastic waste stream designated for recycling and the energy properties of the post-recycling plastic mixture were estimated. Tests results showed that the calorific value of this mixture reached 31.8 MJ/kg, whereas, ash and chlorine content equaled 2.7% and 1.1% of dry mass, respectively. These parameters indicate that the mixture as a high-calorific fuel component may be a valuable addition to refuse-derived fuel (RDF) produced from the over-sieve fraction of municipal waste. Concurrently, as a result of the development of waste gasification technologies with a high share of electricity production in low-medium power range plants, it is possible to integrate them with plastic recycling and RMWP plants in the Polish national waste management system.
A liquid crystal display (LCD) recycling process is needed to increase its efficiency by recovering the resources in addition to metals and plastics. This study investigates the pre-treatment process for recycling LCD glass. Recycling pre-treatment includes dismantling the LCD from the waste product, crushing the glass, and separating the glass particles from the impurities. Scanning electron microscopy confirmed that the oscillation milling process is more effective in maintaining uniform powder shape and size as compared to the cut milling process. The glass particles crushed by the oscillating mill, optimized at 1500 rpm, had a uniformly distributed particle size of less than 10 µm. These small particles were separated from the organic impurities, achieving a 98% pure powder that can be used as recycled raw materials. The proposed pre-treatment process for recycling LCD glass will enhance the ability to use waste glass as a valuable resource in the manufacturing of future displays.
Lean is one of the systematic approach to achieve higher value for organizations through
eliminate non-value-added activities. It is an integrated set of tools, techniques, and principles
designed to optimize cost, quality and delivery while improving safety. In Vietnam,
industry waste management and treatment has become serious issue. The aim of this research
is to present the effective of Lean application for industrial wastes collecting and
delivery improvement. Through a case study, this paper showed the way of Lean tools and
principles applied for wastes management and treatment such as Value Stream Mapping,
Pull system, Visual Control, and Andon to get benefit on both economic and environment.
In addition, the results introduced a good experience for enterprises in Vietnam and other
countries have similar conditions to Vietnam in cost saving and sustainable development in
waste management.
Rare earth metals including yttrium and europium are one of several critical raw materials, the use of which ensures the development of the so-called high technology. The possibility of their recovery in Europe is limited practically only to secondary materials such as phosphogypsum and electronic waste.
The article presents the results of our research concerning the development of recovery technology of yttrium and europium from luminophore CRT used lamps. It describes the principle of separation of elements and the test results of cleaning the concentrate. It was shown that the costs of preparing the concentrate according to the proposed technology are lower than the phosphogypsum processing technology and the composition of the resulting product does not contain hazardous substances.
A mathematical model of waste tyre pyrolysis process is developed in this work. Tyre material decomposition based on a simplified reaction mechanism leads to main product lumps: noncondensable (gas), condensable (pyrolytic oil) and solid (char). The model takes into account kinetics of heat and mass transfer in the grain of the shredded rubber material as well as surrounding gas phase. The main reaction routes were modelled as the pseudo-first order reactions with a rate constant calculated from the Arrhenius type equation using literature values of activation energy determined for main tyre constituents based on TG/DTG measurements and tuned pre-exponential parameter values obtained by fitting theoretical predictions to the experimental results obtained in our laboratory reactor. The model was implemented within the CFD software (ANSYS Fluent). The results of numerical simulation of the pyrolysis process revealed non-uniformity of sample’s porosity and temperature. The simulation predictions were in satisfactory agreement with the experimentally measured mass loss of the tyre sample during pyrolysis process investigated in a laboratory reactor.
The article discusses an innovative system used for aerobic biostabilisation and biological drying of solid municipal waste. A mechanical–biological process (MBT) of municipal solid waste (MSW) treatment were carried out and monitored in 5 bioreactors. A two-stage biological treatment process has been used in the investigation. In the first step an undersize fraction was subjected to the biological stabilisation for a period of 14 days as a result of which there was a decrease of loss on ignition, but not sufficient to fulfill the requirements of MBT technology. In the second stage of a biological treatment has been applied 7-days intensive bio-drying of MSW using sustained high temperatures in bioreactor. The article presents the results of the chemical composition analysis of the undersize fraction and waste after biological drying, and also the results of temperature changes, pH ratio, loss on ignition, moisture content, combustible and volatile matter content, heat of combustion and calorific value of wastes. The mass balance of the MBT of MSW with using the innovative aeration system showed that only 14.5% of waste need to be landfilled, 61.5% could be used for thermal treatment, and nearly 19% being lost in the process as CO2 and H2O.
Results of the investigation of thermal degradation of polyolefins in the laboratory-scale set-up reactors are presented in the paper. Melting and cracking processes were carried out in two different types of reactors at the temperature of 390-420°C. This article presents the results obtained for conversion of polyolefin waste in a reactor with a stirrer. Next, they were compared with the results obtained for the process carried out in a reactor with a molten metal bed, which was described in a previous publication. For both processes, the final product consisted of a gaseous (2-16 % mass) and a liquid (84-98 % mass) part. No solid product was produced. The light, "gasoline" fraction of the liquid hydrocarbons mixture (C4-C10) made up over 50% of the liquid product. The overall (vapor) product may be used for electricity generation and the liquid product for fuel production.
For a very long period of time, Polish waste management was based mainly on landfilling at landfills, which had a negative impact on the surrounding environment. The EU requirements for the Member States have led to a revolution in Polish legislation on waste management and local governments have become responsible for creating local waste management systems that will affect the achievement of EU targets. One of the solutions undertaken by several municipalities is the construction and operation of a municipal waste thermal treatment installation, which not only reduced the amount of waste deposited, but also supported the local power industry by generating electricity and heat. The emission standards for installations producing energy from waste, as in the case of conventional power plants and combined heat and power plants, are very strict, therefore, the continuous monitoring of emitted pollutants is carried out, and waste gas treatment systems are developed based on the best available techniques (BAT). The article presents emission standards applicable to waste incineration plants, including duties in the field of the environment, as well as issues related to the installation as a source of energy. In addition, the currently functioning waste incineration plants in Poland have been briefly characterized, and development plans in this area in the country have been described.
The utilization of mining waste is an important problem in Poland and Ukraine. The article presents one of the variants of waste mining in the quarry in Płaza. An analysis of the resource base of the deposit and their location at the area of Płaza deposit is carried out. The Płaza deposit is located in the western part of the Małopolskie province, in the entire Chrzanów commune. The Płaza deposit is constructed of Middle Triassic carbonates represented by the limestone-dolomite Olkusz Formation and the limestone-marlized Gogolin Formation. The deposit series lies on the dolomites of Röt age (Lower Triassic – Olenekian). The most valuable raw material was the pure limestone from the lower part of the Olkusz Formation, now almost completely exploited. The article presents the current state of mineable reserves of the deposit and their quality (chemical and physical characteristics). Moreover the article shows potential consumers of raw material and the possibility of extending the life of the mine work. According to the results of the environmental monitoring the ground and hydrogeological conditions were evaluated, the results of which allowed a more efficient use of the existing quarry area for mining waste disposal to be proposed. The paper presents a conceptual waste transport scheme, planned distribution and compaction of wastes belonging to the first, second and third group and then a surface reclamation. In view of the absence of similar decisions analogs, the consideration of the open-pit as a one solid geomechanical system functioning under the conditions of uncertainty is suggested. In order to examine the dynamics of the waste compaction process, some measures are foreseen to constantly observe their subsidence. The proposed measures for the synchronous disposal of mining waste in the worked-out area of the open-pit and the simultaneous mining operation in the quarry will allow the life cycle of the open-pit to be prolonged for 15–20 years.
Municipal waste management has been an area of special interest of the European Commission (EC) for many years. In 2018, the EC pointed out issues related to municipal waste management as an important element of the monitoring framework for the transition towards a circular economy (CE), which is currently a priority in the economic policy of the European Union (EU). In the presented monitoring framework, 10 CE indicators were identified, among which issues related to municipal waste appear directly in two areas of the CE – in the field of production and in the field of waste management, and indirectly – un two other areas – secondary raw materials, and competitiveness and innovation. The paper presents changes in the management of municipal waste in Poland in the context of the implementation of the CE assumptions, a discussion of the results of CE indicators in two areas of the CE monitoring framework in Poland (production and waste management), and a comparison of the results against other European countries.
In Poland, tasks related to the implementation of municipal waste management from July 1, 2013 are the responsibility of the municipality, which is obliged to ensure the conditions for the system of selective collection and collection of municipal waste from residents, as well as the construction, maintenance and operation of regional municipal waste treatment installations (RIPOK). The municipality is also committed to the proper management of municipal waste, in accordance with the European waste management hierarchy, whose overriding objective is to prevent waste formation and limiting its amount, then recycling and other forms of disposal, incineration and safe storage. The study analyzed changes in the value of two selected CE indicators, i.e. (1) the municipal waste generation indicator, in the area of production and (2) the municipal waste recycling indicator, in the area of waste management. For this purpose, statistical data of the Central Statistical Office (GUS) and Eurostat were used. Data has been presented since 2014, i.e. from the moment of initiating the need to move to the CE in the EU. In recent years, there has been an increase in the amount of municipal waste generated in Poland as well as in the EU. According to Eurostat, the amount of municipal waste generated per one inhabitant of Poland increased from 272 kg in 2014 to 315 kg in 2017. It should be noted that the average amount of municipal waste generated in Poland in 2017 was one of the lowest in EU, with a European average of 486 kg/person. Poland has achieved lower levels of municipal waste recycling (33.9%) than the European average (46%). The reason for Poland’s worse results in the recycling of municipal waste may be, among others, the lack of sufficiently developed waste processing infrastructure, operating in other countries such as Germany and Denmark, and definitely higher public awareness of the issue of municipal waste in developed countries. Municipal waste management in Poland faces a number of challenges in the implementation of GOZ, primarily in terms of achieving the recycling values imposed by the EC, up to a minimum of 55% by 2025.
With the increase in the mass of municipal waste generated, the demand for facilities dealing with their development is increasing. The aim of the research was to determine environmental and anthropogenic factors affecting the location of waste management facilities and an attempt to indicate potential locations for selected waste management facilities in the communes of the Sądecko-Gorlicki region. The scope of work included: a review of existing waste management facilities in the studied region, acquisition of geodatabase for digital data, analysis of the distance between the waste management facilities and environmental or anthropogenic elements, and analysis of potential locations designated in the GIS based on the developed criteria.As a result of spatial analyzes, it was found that in the study area, there are 3 places of potentiallocations for installation of municipal solid waste treatment facilities.
The article presents the results of preliminary tests obtained from the analysis of ash coming from the combustion of various types of waste in household furnaces. The aim of this work was to examine the infl uence of various types of waste burned in household furnaces on the elemental composition of the generated ash. As part of the research, analyses of ash generated from the incineration of mixed waste, plastics, wood, textiles, rubber waste and paper were made. The content of selected metal ions: Mn, Cu, Mo, Zn, Cd, Tl, Cr, Co, Ni, As, Sn, Sb, Pb, V was determined in the tested samples, according to PN-EN ISO 17294-2: 2016-11 standard. The highest concentrations of zinc were found in the large-sized waste, rubber and textile ash samples and highest concentrations of copper were found in the plastic and paper ash samples. The highest concentrations for elements such as copper, lead, cobalt and chromium were recorded for samples of rubber and large-sized waste containing e.g. varnished furniture boards. The obtained results showed that depending on the waste incinerated, the content of selected metals was signifi cantly diff erent, and the highest concentrations were noted for samples of large-sized waste, waste from segregated plastics and waste from rubbers.
During the past several years big changes have been observed in waste water disposal, noticeable particularly in the improvement of water protection and sewage treatment. An important element of waste water disposal still requiring improvement is a low development of sewage systems in rural and urban areas. The main problem is an increasing amount of sludge, high degree of sediment hydration and considerable ability to anaerobic decomposition, a lack of areas for managing sediments near big cities and deposits of sediments on storage areas. Selected issues of waste water disposal and sludge handling in the Mazovian Province against a background of waste water disposal and sludge handling in Poland were presented in the article.
The research involved coal from 11 coal mines in the USCB in Poland, intended for combustion in power plants and for home furnaces. It has been stated that the content of As, Cd, Co, Cr, Cu, Mo, Ni, Pb, Sb and Zn in the ash of coal fines from the USCB with a density of <1.30 × 103 kg/m3 is the largest, and in the ash fraction with a density >2.00 × 103 kg/m3 is the smallest The fraction ash of coal fine with a density> 2.00 × 103 kg/m3 has the greatest impact on the content of As, Cd, Co, Cr, Mo, Pb and Zn in whole coal fines from the USCB. In turn, the largest impact on the content of Cu, Ni and Sb in whole fine coal ash has the fraction of coal fine having a density of 1.60–2.00 × 103 kg/m3 (for Cu) and fraction with a density <1.35 × 103 kg/m3 (Ni and Sb). The main carriers of elements in fine coal ash, thus in future furnace waste, are the grains of aluminosilicates and iron oxides resulting from the combustion of probably fusinite and semifusinite and the combustion of adhesions of these macerals with dolomite, ankerite and pyrite. The purification of fine coal from the matter with a density >2.00 × 103 kg/m3 may reduce the sulfur content (by 40%), the content of main element oxides (from 33% to 85%) and the content of ecotoxic elements (from 7% to 59%) in fine coal ash, i.e. in potential furnace wastes. Due to the small content of mineral matter, ash and sulfur in coal, small content of Al, Fe, Ca, Mg, Na, K, P oxides and high content of SiO2 in coal ash, low value of the Rogi sinterability index, small inclination of coal fine to slag the furnaces and boiler fouling by sludge, the investigated coal was favorable for technological reasons, fuel in power plants and for home furnaces