Archives of Mining Sciences

[1] S. Prusek, E. Krause, J. Skiba, Designing coal panels in the conditions of associated methane and spontaneous fire hazards 30 ( 4), 525-531 (2020). DOI: https://doi.org/10.1016/j.ijmst.2020.05.015
[2] W. Dziurzyński, A. Krach, T. Pałka, Shearer control algorithm and identification of control parameters. Arch. Min. Sci. 63 (3), 537-552 (2018).
[3] W. Dziurzyński, A. Krach, J. Krawczyk, T. Pałka, Numerical Simulation of Shearer Operation in a Longwall District. Numerical Simulation of Shearer Operation in a Longwall District. Energies 13, 5559 (2020). DOI: https://doi.org/10.3390/en13215559
[4] E. Krause, A. Przystolik, B. Jura, Warunki bezpieczeństwa wentylacyjno-metanowego w ścianach o wysokiej koncentracji wydobycia. XXI Międzynarodowa Konferencja Naukowo-techniczna Górnicze Zagrożenia Naturalne. 6-8.11.2019 r., Jawor k. Bielska Białej.
[5] A. Walentek, T. Janoszek, S. Prusek, A. Wrana, Influence of longwall gateroad convergence on the process of mine ventilation network-model tests. International Journal of Mining Science and Technology 29, (4), 585-590 (2019).
[6] A. Juganda, J. Brune, G. Bogin, J. Grubb, S. Lolon, CFD modeling of longwall tailgate ventilation conditions. In: Proceedings of the 16th North American mine ventilation. Golden, CO; 2017.
[7] E. Krause, Z. Lubosik, Wpływ koncentracji wydobycia podczas eksploatacji pokładów silnie metanowych na wydzielanie się metanu do środowiska ścian. 9th International Symposium on Occupational Heat and Safety Petrosani Rumunia. October 3rd 2019 r.
[8] E. Krause, J. Skiba, B. Jura, Overview of Ventilation Characteristic, Practices and regulations in Poland. XXVIII Szkoła Eksploatacji Podziemnej, Kraków, 25-27.02.2019 r. https://unece.org/fileadmin/DAM/energy/images/CMM/CMM_CE/12._Krause_Skiba_Jura.pdf
[9] E. Krause, B. Jura, J. Skiba, Mining speed control in the coal panel with high coal output concentration. Kontrola prędkości urabiania w ścianach o wysokiej koncentracji wydobycia. Spotkanie Grupy Roboczej Ekspertów ds. metanu z kopalń Europejskiej Komisji Gospodarczej ONZ. Genewa 7-8.11.2019 r.
[10] J. Qin, Q. Qingdong, H. Guo, CFD simulations for longwall gas drainage design optimization. International Journal of Mining Science and Technology 27 (5), 777-782 (2017). DOI: https://doi.org/10.1016/j.ijmst.2017.07.012
[11] E. Krause, Ocena i zwalczanie zagrożenia metanowego w kopalniach węgla kamiennego. Prace Naukowe GIG nr 878. Katowice 2009.
[12] K .M. Tanguturi, R.S. Balusu, Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution. Journal of Mining and Environment 9, 3, 547-557 (2018). DOI: https://doi.org/10.22044/jme.2018.5960.1410
[13] G . Xu, K.D. Luxbacher, S. Ragab, J. Xu, X. Ding, Computational fluid dynamics applied to mining engineering: a review. International Journal of Mining, Reclamation and Environment 31 (4), 251-275 (2017).
[14] Z . Wang, T. Ren, L. Ma, J. Zhang, Investigations of ventilation airflow characteristics on a longwall face – a computational approach. Energies 11, 1564 (2018). DOI: https://doi.org/10.3390/en11061564
[15] Z . Wang, T. Ren, Y. Cheng, Numerical investigations of methane flow characteristics on a longwall face Part I: Methane emission and base model results, Journal of Natural Gas Science and Engineering 43, 242-253 (2017).
[16] Z . Wang, T. Ren, Y. Cheng, Numerical investigations of methane flow characteristics on a longwall face Part II: Parametric studies. Journal of Natural Gas Science and Engineering 43, 242-253 (2017).
[17] SolidWorks Flow Simulation 2012 Technical Reference. https://d2t1xqejof9utc.cloudfront.net/files/18565/SW_CFD_technical_reference.pdf?1361897013

[1] A . Jarosiński, Możliwości pozyskania metali ziem rzadkich w Polsce. Zeszyty Naukowe. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN , Kraków, 92, 75-88 (2016).
[2] Y . Kanazawa, M. Kamitani, Rare Earth Minerals and Resources in the World. Journal of Alloys and Compounds 408-412, 1339-1343 (2006). DOI : http://dx.doi.org/10.1016/j.jallcom.2005.04.033
[3] M. Kathryn, K. M. Goodenough, F. Wall, D. Merriman, The Rare Earth Elements: Demand, Global Resources, and Challenges for Resourcing Future Generations, Natural Resources Research 27, 201-216 (2018). DOI : https://doi.org/10.1007/s11053-017-9336-5
[4] V. Balaram, Rare earth elements: A review of applications, occurrence, exploration, analysis, recycling, and environmental impact. Geoscience Frontiers 10, 4, 1285-1303 (2019). DOI : https://doi.org/10.1016/j.gsf.2018.12.005
[5] J. Całus-Moszko, B. Białecka, Potencjał i zasoby metali ziem rzadkich w świecie oraz w Polsce. Prace Naukowe GIG. Górnictwo i Środowisko – Główny Instytut Górnictwa, Katowice, 4, 61-72 (2012).
[6] J. Całus-Moszko, B. Białecka, Analiza możliwości pozyskania pierwiastków ziem rzadkich z węgla kamiennego i popiołów lotnych z elektrowni. Gospodarka Surowcami Mineralnymi. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN , Kraków 29, (1) (2013).
[7] A .N. Mariano, A. Mariano, Rare earth mining and exploration in North America. Elements 8 (5), 369-376 (2012).
[8] S . Jaireth, D.M. Hoatson, Y. Miezitis, Geological setting and resources of the major rare-earth-element deposits in Australia”. Ore Geology Reviews 62, 72-128 (2014). DOI : https://doi.org/10.1016/j.oregeorev.2014.02.008
[9] G. Charalampides, K.I. Vatalis, B. Apostoplos, B. Ploutarch-Nikolas, Rare Earth Elements: Industrial Applications and Economic Dependency of Europe. Procedia Economics and Finance 24, 126-135 (2015). DOI : https://doi.org/10.1016/S2212-5671(15)00630-9
[10] M. Mehmood, Rare Earth Elements – a Review. Journal of Ecology & Natural Resources 2 (2) (2018). DOI : https://doi.org/10.23880/jenr-16000128
[11] S . Jaireth, D.M. Hoatson, Y. Miezitis, Geological setting and resources of the major rare-earth-element deposits in Australia. Ore Geology Reviews, (62), 72-128 (2014). DOI : https://doi.org/10.1016/j.oregeorev.2014.02.008
[12] M. Stępień, B. Białecka, Inwentaryzacja innowacyjnych technologii odzysku odpadów energetycznych. System Wspomagania w Inżynierii Produkcji. Sposoby i Środki Doskonalenia Produktów i Usług na Wybranych Przykładach 6 (8), 108-123 (2017).
[13] Plan gospodarki odpadami dla województwa śląskiego. Załącznik E, Katowice (2010).
[14] A . Bocheńczyk, M. Mazurkiewicz, E. Mokrzycki, Fly ash energy production – a waste, byproduct raw material. Mineral Resources Management, Kraków 31, 139-150 (2015). DOI : https://doi.org/10.1515/gospo-2015-0042
[15] R.S. Blissett, N. Smalley, N.A. Rowson, An investigation into six coal fly ashes from United Kingdom and Poland to evaluate rare earth element content. Fuel – the science and technology of Fuel and Energy 119, 236-239, United Kingdom (2013). DOI : https://doi.org/10.1016/j.fuel.2013.11.053
[16] H. Zhang, Y. Zhao, Study on Physicochemical Characteristics of Municipal Solid Waste Incineration (MSWI ) Fly Ash, International Conference on Environmental Science and Information Application Technology 1, 28-31 (2009). DOI : https://doi.org/10.1109/ESIAT.2009.33
[17] R. Baron, Determination of rare earth elements in power plant wastes. Mining Machines 4, 24-30 (2020). DOI : https://doi.org/10.32056/KOMAG2020.4.3

[1] P. Bono, R. Gonfiantini, M. Alessio, C. Fiori, L. D’Amelio, Stable isotope (δ18O, δ2H) and Tritium in precipitation: Results and comparison with groundwater perched aquifers in Central Italy. TEC-DOC (IAEA) (2004).
[2] P.J. Dillon, M. Miller, H. Fallowfield, J. Hutson, The potential of riverbank filtration for drinking water supplies in relation to microsystem removal in brackish aquifers. J. Hydrol. 266 (3-4), 209-221 (2002).
[3] P.J. Dillon (Ed.), Management of Aquifer Recharge for Sustainability, A.A. Balkema Publishers, Australia, (2002).
[4] P.J. Dillon, Future Management of Aquifer Recharge, UNESCO-VIETNAM Workshop on Augmenting groundwater resources by Artificial Recharge in South East Asia, HCM city, Dec. 15-17-2004 (2005).
[5] P.J. Dillon, S. Toze, D. Page, J. Vanderzalm, E. Bekele, J. Sidhu, S. Rinck-Pfeiffer, Managed aquifer recharge: rediscovering nature as a leading edge technology. Water Sci. Technol. 62 (10), 2338-2345 (2010). DOI: https://doi.org/10.2166/wst.2010.444
[6] I . Gale, I. Neumann, R. Calow, M. Moench, The effectiveness of Artificial Recharge of Groundwater: a review. Phase 1 Final report R/02/108N, British Geological Survey, (2002).
[7] I . Gale, D.M.J. Macdonald, I. Neumann, R. Calow, Augmenting Groundwater Resources by Artificial Recharge. AGRAR, Phase 2 Inception report, British Geological Survey, (2003).
[8] N.V. Giang, M. Bano, T.D. Nam, Groundwater investigation on sand dunes area in southern part of Vietnam by Magnetic Resonance Sounding. Acta Geophysica 60 (1), 157-172 (2012). DOI: https://doi.org/10.2478/s11600-010-0040-2
[9] N.V. Giang, The role of geophysical techniques for hydrogeological and environmental study in the sand-dunes area in Vietnam. Poster presentation at the IUGG XXIV General Assembly 2-13 July, Perugia, Italy (2007).
[10] N.V. Giang, N. Hida, Study of Hydrological Characteristics and Hydrogeological Conditions for Management of Aquifer Recharge in NW Hanoi Vietnam. Proc. of International Symposium on Efficient Groundwater resources Management, Feb.16-21, Bangkok, Thailand (2009).
[11] N.V. Giang, N.B. Duan, L.C. Khiem, L.N. Thanh, N.Q. Dung, The interpretation of geophysical data for studying hydrogeological characteristics of BacBinh, BinhThuan area. Vietnam J. Earth Sci. 68B (4), 410-422, (2016), (in Vietnamese-Abstract in English).
[12] N.V. Giang, N.B. Duan, L.N. Thanh, N. Hida, Geophysical techniques to aquifer locating and monitoring for industrial zones in North Hanoi, Vietnam. Acta Geophysica 61 (6), 1573-1597 (2013). DOI: https://doi.org/10.2478/s11600-013-0147-8.
[13] N.V. Giang, L.N. Thanh, V.Q. Hiep, N. Hida, Hydrological and hydrogeological characterization of groundwater and river water in the North Hanoi industrial area, Vietnam. Environmental Earth Sciences 71 (11), 4915-4924 (2014). DOI: https://doi.org/10.1007/s12665-014.3086-z.
[14] N.V. Giang, L.B. Luu, T.D. Nam, Determination of water bearing layers on dry sand dune of the Bac Binh-Binh Thuan area by electromagnetic data. Vietnam J. Earth Sci. 30 (4), 472-480 (2008), (in Vietnamese-Abstract in English).
[15] N. Hida, N.V. Giang, Artificial recharge of groundwater in the Rokugo alluvial fan: Experiment of April and September. Proceedings of Japanese Association of Hydrological Sciences (JAHS-21) at Matsumoto, Japan, Oct. 28-29, (2006).
[16] N. Hida, N.V. Giang, M. Kagabu, Experience of Managed Aquifer Recharge Using Basin Method in the Rokugo Alluvial Fan, Northern Japan. Proc. of International Symposium on Efficient Groundwater resources Management, Feb. 16-21, Bangkok, Thailand (2009).

[1] V. Artemyev, P. McInally, Improvements in Longwall Technology and Performance in Kuzbass Mines of Suek. Proceedings of the 18th Coal Operators’ Conference, Mining Engineering, University of Wollongong, 124-133 (2018).
[2] S . Banerjee, Performance evaluation of continuous miner based underground mine operation system: An OEE based approach. New Trends in Production Engineering 2, 1, 596-603 (2019). DOI: https://doi.org/10.2478/ntpe-2019-0065
[3] D . Bolstad, J. Hill, Bureau of Mines rock bolting research. Proceedings of the International Symposium on Rock Bolting, Abisko, Sweden, 313-320 (1983).
[4] F. Breinig, K. Opolony, Geplante Doppelnutzung einer Rechtankerstrecke in 1200 m Teufe im Flöz D2/C. Aachen International Mining Symposia, 5th International Symposium – Roofbolting in Mining, RWTH Aachen, 159-177 (2004).
[5] T . Bush, Streckenausbau mit eisernen Ankern. Zeitschrift für das Berg – Hütten – und Salinenwesen, Berlin, 7-9 (1919).
[6] I . Canbulat, A. Wilkinson, G. Prohaska, M. Mnisi, N. Singh, An investigation into the support systems in South African collieries. Safety in Mines Research Advisory Committee, Project No SI M 020205, CSIR Division of Mining Technology, Ground Consulting (Pty) Ltd (2005).
[7] C . Cao, PhD thesis, Bolt profile configuration and load transfer capacity optimisation. School of Civil, Mining and Environmental Engineering, University of Wollongong (2012).
[8] D .R. Dolinar, S.K. Bhatt, Trends in roof bolt application. Proceedings: new technology for coal mine roof support. C. Mark, D.R. Dolinar, R.J. Tuchman, T.M. Barczak, S.P. Signer, P.F. Wopat, (Eds.) Cincinnati, OH: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 2000-151 (IC 9453), 43-51 (2000).
[9] R . Fletcher, Roof Bolting Equipment and Practices. Mng. Cong. J., Nov., 80-82 (1956).
[10] S .D. Flook, J.J. Leeming, Recent developments in longwall mining entry development and room and pillar systems. Gospodarka Surowcami Mineralnymi 24, 4/3, 11-23 (2008).
[11] Golder Associates UK Ltd, Initial Rockbolt Support Design. Rockbolting Trial, Budryk Colliery, Poland. Nottingham (2018).
[12] B. Hebblewhite, 25 Years of Ground Control Developments, Practices, and Issuses in Australia. 25th International Conference on Ground Control in Mining, Morgantown, WV, 111-117 (2006).
[13] H. Jalalifar, PhD thesis, A new approach in determining the load transfer mechanism in fully grouted bolts. School of Civil, Mining and Environmental Engineering, University of Wollongong (2006).
[14] H. Jurecka, Ankerausbau eine Schlüsseltechnologie für Hochleistungsstrebbetriebe in großen Teufen. Aachen International Mining Symposia, 4th International Symposium – Roofbolting in Mining, RWTH Aachen, 1-17 (2001).
[15] V. Kajzar, R. Kukutsch, P. Waclawik, P. Konicek, Coal pillar deformation monitoring using terrestrial laser scanner technology in room and pillar panel – A case study from the Ostrava-Karvina Coal Field. Rock Mechanics and Rock Engineering: From the Past to the Future – Ulusay et al. (Eds.), Taylor & Francis Group, London, 951-956 (2016).
[16] H. Kang, Support technologies for deep and complex roadways in underground coal mines: a review. Int. J. Coal Sci. Technol. 1 (3), 261-277 (2014). DOI: https://doi.org/10.1007/s40789-014-0043-0
[17] H. Kang, Sixty years development and prospects of rock bolting technology for underground coal mine roadways in China. Journal of China University of Mining & Technology 45 (6), 1071-1081 (2016).
[18] K . Kovári, The Control of Ground Response – Milestones up to the 1960s. Proc. of the AITES -ITA World Tunnel Congress, Italy, Milan, 93-119 (2001).
[19] A . Kumar, R. Singh, P. Waclawik, Numerical Modelling Based Investigation of Coal Pillar Stability for Room and Pillar Development at 900 m Depth of Cover. 37TH International Conference on Ground Control in Mining, 193-203 (2018).
[20] B. Langhanki, Planungskonzeption zur Doppelnutzung einer Rechtankerstrecke im Flöz D2/C in 1.200 m Teufe. Aachen International Mining Symposia, 4th International Symposium – Roofbolting in Mining, RWTH Aachen, 217-233 (2001).
[21] J. Luo, PhD thesis, A New Rock Bolt Design Criterion and Knowlwdge-based Expert System for Stratified Roof. Faculty of the Virginia Polytechnic Institute and State University, Blacksburg, Virginia (1999).
[22] T . Majcherczyk, A. Szaszenko, E. Sdżwiżkowa, Fundamentals of geomechanics. Wydawnictwo AGH, Kraków (2006).
[23] C .P. Mangelsdorf, Current Trends in Roof Truss Hardware. Proc. of 2nd Conference on Ground Control in Mining, edited by S.S. Peng, 108-112 (1982).
[24] C . Mark, Design of roof bolt systems. Proc.New Technology For Coal Mine Roof Support. U.S. Department of Health and Human Services, Pittsburgh, PA, 111-131 (2000).
[25] J. Modi, S. Bharti, R. Kant, Applicability of Continuous Miner in Room and Pillar Mining System: Higher Production and Productivity with Safety. International Conference on Deep Excavation, Energy Resource and Production (DEE P16), IIT Kharagpur, India (2017).
[26] A . Nierobisz, Rockbolting – history, present and future. Międzynarodowa Konferencja Szkoleniowa: Perspektywy stosowania obudowy kotwowej w polskich kopalniach węgla kamiennego, Jaworze, kwartalnik GIG Nr 2/1/2010, 184-203 (2010).
[27] A . Nierobisz, Development of Roof Bolting Use in Polish Coal Mines. Journal of Mining Science 47, No. 6, 751- 760 (2011).
[28] B. Neyman, R. Gocman, Guidelines for rockbolt support in workings. Biuletyn techniczno-informacyjny GIG nr 9 (1960).
[29] K. Opolony, H. Witthaus, A. Hucke, A. Studeny, Ergebnisse von numerischen Berechnungen und physikalischen Modellversuchen als Planungshilfe für eine Rechteckankerstrecke in Flöz D2/C. Aachen International Mining Symposia, 5th International Symposium – Roofbolting in Mining, RWTH Aachen, 539-554 (2004).
[30] S. Peng, Coal Mine Ground Control. (3rd ed.), Syd Peng Publisher, Morgantown (2008).
[31] K. Podgórski, W. Podgórski, Rockbolt support of underground workings. Wydawnictwo Śląsk. Katowice (1969).
[32] L. Rabcewicz, Bolted support for tunnels. Mine and Quarry- Engineering, April, 153-159 (1955).
[33] E.U. Reuther, A. Heime, Verbesserte Bemessung von Ankerausbau in Abbau- und Basisstrecken. Kommission der Europäischen Gemeinschaften, technische Forschung Kohle, Forschungsvertrag Nr. 7220-AB/120, Luxemburg (1990).
[34] A. Sahebi, J. Hossein, M. Ebrahimi, Stability analysis and optimum support design of a roadway in a faulted zone during longwall face retreat – case study: Tabas Coal Mine. N. Aziz (Eds.), 10th Underground Coal Operators’ Conference, University of Wollongong & the Australasian Institute of Mining and Metallurgy, 88-96 (2010).
[35] R. Schach, K. Garshol, A.M. Heltzen, Rock bolting: a practical handbook. Pergamon Press (1979).
[36] A.J.S. Spearing, G. Bylapudi, K. Mondal, A.W. Bhagwat, Rock anchor corrosion potential determination in US underground coal mines. The Southern African Institute of Mining and Metallurgy 6th South African Rock Engineering Symposium SARES (2014).
[37] A.J.S. Spearing, B. Greer, M. Reilly, Improving rockbolt installations in US coal mines. The Journal of The Southern African Institute of Mining and Metallurgy, Vol. 111, 555-563 (2011).
[38] S. Tadolini, R. Mazzoni, Understanding roof bolt selection and design still remains priceless. 25th International Conference on Ground Control, July 2006. Morgantown, WV, USA , 382-389 (2006).
[39] S . Taghipoor, Application of numerical modelling to study the efficiency of roof bolting pattern in east 1 main roadway of Tabas coal mine. 6th International Conference on Case Histories in Geotechnical Engineering, Arlington, 2-5 (2008).
[40] P. Waclawik, J. Ptacek, P. Konicek, R. Kukutsch, J. Nemcik, Stress-state monitoring of coal pillars during room and pillar extraction. Journal of Sustainable Mining 15, 49-56 (2016). DOI: https://doi.org/10.46873/2300-3960.1207
[41] P. Waclawik, R. Snuparek, R. Kukutsch, Rock Bolting at the Room and Pillar Method at Great Depths. Procedia Engineering 191, 575-582 (2017). DOI: https://doi.org/10.1016/j.proeng.2017.05.220
[42] W. Weigel, Channel Iron for Roof Control. Engineering and Mining Journal, Vol. 144, May, 70-72 (1943).
[43] J. Arthur, Ground control in coal mines in Great Britain. Coal 2006: Coal Operators’ Conference, University of Wollongong & the Australasian Institute of Mining and Metallurgy, 10-19 (2006).

[1] S.A. Musstjab, A.K. Bhowmik, S. Qamar, S.T. Abbas Shah, M. Sohail, S.I. Mulla, M. Fasola, H. Shen, Mercury contamination in deposited dust and its bioaccumulation patterns throughout Pakistan. Sci. Total Environ. 569-570, 585-593 (2016).
[2] X. Wang, Z. He, H. Luo, M. Zhang, D. Zhang, X. Pan, G.M. Gadd, Multiple-pathway remediation of mercury contamination by a versatile selenite-reducing bacterium. Sci. Total Environ. 615 (15), 615-623 (2018).
[3] K . Halbach, Ø. Mikkelsen, T. Berg, E. Steinnes, The presence of mercury and other trace metals in surface soils in the Norwegian Arctic. Chemosphere 188, 567-574 (2017).
[4] D . Yu, H. Duan, Q. Song, X. Li, H. Zhang, H. Zhang, Y. Liu, W. Shen, J. Wang, Characterizing the environmental impact of metals in construction and demolition waste. Environ. Sci. Pollut. Res. 25, 13823-13832 (2018).
[5] J. Yang, M. Takaoka, A. Sano, A. Matsuyama, R. Yanase, Vertical distribution of total mercury and mercury methylation in a landfill site in Japan. Int. J. Environ. Res. Public Health 15 (6), 1252 (2018).
[6] K . Gogola, T. Rogala, M. Magdziarczyk, A. Smolinski, The mechanisms of endogenous fires occurring in extractive waste dumping facilities, Sustainability 12, 2856 (2020). DOI: https://doi.org/10.3390/su12072856
[7] D . Raj, A. Chowdhury, S.K. Maiti, Ecological risk assessment of mercury and other heavy metals in soils of coal mining area: A case study from the eastern part of a Jharia coal field, India. Hum. Ecol. Risk Assess. 23, 767-787 (2017).
[8] R . Fernández-Martínez, J.M. Esbrí, P. Higueras, I. Rucandio, Comparison of mercury distribution and mobility in soils affected by anthropogenic pollution around chloralkali plants and ancient mining sites. Sci. Total Environ. 671, 1066-1076 (2019).
[9] A. González-Martínez, M. de Simón-Martín, R. López, R. Táboas-Fernández, A. Bernardo-Sánchez, Remediation of potential toxic elements from wastes and soils: analysis and energy prospects. Sustainability 11, 3307 (2019). DOI: https://doi.org/10.3390/su11123307
[10] U nited Nations Environment Programme, 2013. Global Mercury Assessment, Sources, emissions, releases and environmental transport. Accessed: January 6, 2016 at: http://www.unep.org/PDF/PressReleases/GlobalMercuryAssessment2013.pdf.
[11] N . Howaniec, A. Smolinski, Biowaste utilization in the process of co-gasification with bituminous coal and lignite. Energy 118, 18-23 (2017).
[12] P. Krawczyk, N. Howaniec, A. Smolinski, Economic efficiency analysis of substitute natural gas (SNG) production in steam gasification of coal with the utilization of HTR excess heat. Energy 114, 1207-1213 (2016).
[13] A. Smolinski, N. Howaniec, Analysis of porous structure parameters of biomass chars versus bituminous coal and lignite carbonized at high pressure and temperature – chemometric study. Energies 10, 1457 (2017). DOI: https://doi.org/10.3390/en10101457
[14] J. Zdeb, N. Howaniec, A. Smolinski, Utilization of carbon dioxide in coal gasification – an experimental study. Energies 12, 140 (2019). DOI: https://doi.org/10.3390/en12010140
[15] M. Sexauer, M. Gustin, M. Coolbaugh, B. Engle, R. Fitzgerald, S. Keislar, D. Lindberg, J. Nacht, J. Quashnick, C. Rytuba, H. Sladek, R. Zhang, R. Zehner, Atmospheric mercury emissions from mine wastes and surrounding geologically enriched terrains. Environ. Geol. 43, 339-351 (2003).
[16] F. Steenhuisen, S.J. Wilson, Development and application of an updated geospatial distribution model for gridding 2015 global mercury emissions. Atmosph. Environ. 211, 138-150 (2019).
[17] A. Michalska, B. Bialecka, A. Bauerek, The hazard of mercury contamination of the environment resulting from the disposal of mining waste. Science and technologies in geology, exploration and mining, Conference Proceedings 3, (2015). ISBN 978-619-7105-33-9 / ISSN 1314-2704. DOI: https://doi.org/10.5593/sgem2015B13
[18] T . Antoszczyszyn, A. Michalska, The potential risk of environmental contamination by mercury contained in coal mining waste. Journal of Sustainable Mining 15, 191-196 (2017).
[19] P. Rompalski, A. Smolinski, H. Krzton, J. Gazdowicz, N. Howaniec, L. Róg, Determination of mercury content in hard coal and fly ash using X-ray diffraction and scanning electron microscopy coupled with chemical analysis. Arab. J. Chem. 12 (8), 3927-3942 (2019).
[20] B.G. Miller, Clean Coal Engineering Technology, Butterworth-Heinemann (2017). ISBN 978-0-12-811365-3.
[21] X. Bai, W. Li, Y. Wang, H. Ding, The distribution and occurrence of mercury in Chinese coals. Int. J. Coal Sci. Technol. 4, 172-182 (2017).
[22] G . Ozbayoglu, Removal of hazardous air pollutants based on commercial coal preparation data. Physicochem. Probl. Miner Process. 49 (2), 621-629 (2013).
[23] H .N. Dougherty, A.P. Schissler, SME Mining Reference Handbook, second ed. Society for Mining, Metallurgy & Exploration (2020). ISBN 978-0-87335-435-6.
[24] J.E. Gray, P.M. Theodorakos, D.L. Fey, D.P. Krabbenhoft, Mercury concentrations and distribution in soil, water, mine waste leachates, and air in and around mercury mines in the Big Bend region, Texas, USA, Environ. Geochem. Health 37, 35-48 (2015).
[25] T .B. Das, S.K. Pal, T. Gouricharan, K.K. Sharma, A. Choudhury, Evaluation of reduction potential of selected heavy metals from Indian coal by conventional coal cleaning. Int. J. Coal Prep. Util. 33, 300-312 (2013).
[26] T . Dziok, A. Strugala, A. Rozwadowski, M. Macherzynski, S. Ziomber, Mercury in the waste coming from hard coal processing. Gospodarka Surowcami Mineralnymi 31 (1), 107-122 (2015).
[27] B. Klojzy-Karczmarczyk, J. Mazurek, Mercury in soils surrounded by selected dumps of coal mining waste. Energy Policy 13 (2), 245-252 (2010).
[28] B. Klojzy-Karczmarczyk, J. Mazurek, Soil contamination with mercury compounds within the range of a conventional coal-fired power plant. Energy Policy 10 (2), 593-601 (2007).
[29] Ministry of Environment. Regulation of the Minister of the Environment of September 9, 2002 on soil quality standards and land quality standards. Journal of Laws 165, 2002, item 1359.
[30] Mining Waste Act. Mining Waste Act (Journal of Laws No. 138 of 2008, 2008, item 865).
[31] Waste Act, 2016. The Waste Act. Journal of Laws of 2016, 2016, item 1987.

[1] S. Vujić et al. (Eds.), Serbian mining and geology in the second half of the XX century. 2014 Academy of Engineering Science of Serbia, Matica Srpska and Mining Institute, Belgrade.
[2] M. Hummel, Comparison of existing open coal mining methods in some countries over the world and in Europe. J. Min. Sci. 48, 146-153 (2012). DOI : https://doi.org/10.1134/S1062739148010169
[3] K. Kavouridis, Lignite industry in Greece within a world context: mining, energy supply and environment. Energ. Policy 36, 1257-1272 (2008). DOI : https://doi.org/10.1016/j.enpol.2007.11.017
[4] B. Scott, P.G. Ranjith, S.K. Choi, M. Khandelwal, A review on existing opencast coal mining methods within Australia. J. Min. Sci. 46, 280-297 (2010). DOI : https://doi.org/10.1007/s10913-010-0036-3
[5] O .N. Mashkovich, D.I. Fedorov, Working hard rocks with a bucket-wheel excavator. Sov. Min. Sci. 4, 49-52 (1968). DOI : https://doi.org/10.1007/BF02501984
[6] A . Inal, The development of diggability index for bucket wheel excavators. MSc Thesis, The University of New South Wales, School of Mining Engineering, Faculty of Applied Science, Sidney, Australia, (1984).
[7] J.R. Coleman, C.F.R. Fitzhardinge, Geotechnology of excavation equipment selection with particular emphasis on bucket wheel excavators. In: National conference publication – Institution of Engineers, Australia 1979.
[8] N . Bolukbassi, O. Koncagul, A. Gunhan Passamehmetoglu, Correlation of rock properties and cutting resistances in assessment of diggability with bucket-wheel excavators. T. In. Min. Metall A. 100, 189-193 (1991).
[9] D. Scheffler, Laboratory and in-situ methods of measurement as the basis for predicting cutting resistances in mining machines. Zkg Int. 50 (7), 347-352 (1997).
[10] K. Dey, A.K. Ghose, Review of cuttability indices and a new rockmass classification approach for selection of surface miners. Rock Mech. Rock Eng. 44, 601-611 (2011). DOI : https://doi.org/10.1007/s00603-011-0147-4
[11] S.H. Suryo, A.P. Bayuseno, J. Jamari, A. Imam Wahyudi, Analysis of Rake Angle Effect to Stress Distribution on Excavator Bucket Teeth Using Finite Element Method. Civil Engineering Journal-Tehran 3, 1222-1234 (2017).
[12] O . Tomuş, A. Andraş, D. Jula, S. Dinescu, Aspects relating to the reliability calculation of the cutting-teeth mounted on the bucket wheel excavators used in lignite mining. MATE C Web Conf.Volume 290, 9th International Conference on Manufacturing Science and Education – MSE 2019 “Trends in New Industrial Revolution” 01020, 1-8 (2019).
[13] M. Menegaki, T. Michalakopoulos, Exploring the effect of physical, human and technical factors on bucket wheel excavators’ efficiency: a fuzzy cognitive map approach. Int. J. Min. Miner. Eng. 10, 189-204 (2019). DOI : https://doi.org/10.1504/IJMME.2019.104447
[14] S. Kostić, N. Vasović, D. Jevremović, Stability of earth slopes under the effect of main environmental properties of weathered clay-marl deposits in Belgrade (Serbia). Environ. Earth Sci. 75, 492, 1-10, (2016). DOI : https://doi.org/10.1007/s12665-016-5339-5
[15] S. Kostić, Analytical models for estimation of slope stability in homogeneous intact and jointed rock mass with a single joint. Int. J. Geomech. 17 (10), 04017089 (2017). DOI : https://doi.org/10.1061/(ASCE)GM.1943-5622.0000994
[16] S. Kostić, J. Trivan, N. Gojković, Estimation of coal cutting force based on the impact of geomechanical factors. In: V. Litvinenko (Ed.) EURO CK2018: Geomechanics and Geodynamics of Rock Masses, CRC Press, Taylor and Francis Group (2018).
[17] J. Trivan, S. Kostić, M. Šalović, Calibration of excavator cutting force and energy consumption considering the impact of the overburden mechanical properties. In: S. Vujić et al. (Eds.) Proceedings of VIII Balkanmine (2022) (in press).
[18] D. Ignjatović, Choice of the method for determining the cutting resistance using rotary bucket-wheel excavators in conditions of open pit lignite mines of Kolubara. MSc Thesis, University of Belgrade Faculty of Mining and Geology, Serbia (1993).
[19] M.A. Oskouei, K. Aquah-Offei, Statistical methods for evaluating the effect of operators on energy efficiency of mining machines. Mining Technology, Transactions of the Institutions of Mining and Metallurgy, Section A, 123, 4, 1-8 (2014).
[20] H. Trenchard, M. Perc, Energy saving mechanisms, collective behavior and the variation range hypothesis in biological systems: A review. BioSystems 147, 40-66 (2016).
[21] L . Dong D. Sun, G. Han, X. Li, Q. Hu, L. Shu, Velocity-free Localization of Autonomous Driverless Vehicles in Underground Intelligent Mines. IEEE Transactions on Vehicular Technology 69, 9292-9303 (2020).
[22] L . Dong, X. Tong, X. Li, J. Zhou, S. Wang, B. Liu. Some developments and new insights of environmental problems and deep mining strategy for cleaner production in mines. Journal of Cleaner Production 210, 1562-1578 (2018).

[1] A. Szurlej, P. Janusz, Natural gas economy in the United States and European markets. Gospodarka Surowcami Mineralnymi (Mineral Resources Management) 29 (4), 77-94 (2013). DOI: https://doi.org/10.2478/gospo-2013-0043
[2] B. Dudley, BP Statistical Review of World Energy 4 (2019).
[3] J. Siemek, M. Kaliski, S. Rychlicki, P. Janusz, S. Sikora, A. Szurlej, Wpływ shale gas na rynek gazu ziemnego w Polsce. Rynek Energii 5, 118-124 (2011).
[4] K . Król, A. Dynowski, Eksploatacja gazu ziemnego z formacji łupkowych w Polsce – nadzieje i fakty (komunikat). Bezp. Pr. Ochr. Śr. w Gór. 10 (2015).
[5] M. Iijima, T. Nagayasu, T. Kamijyo, S. Nakatani, MHI’s Energy Efficient Flue Gas CO2 Capture Technology and Large Scale CCS Demonstration Test at Coal-fired Power Plants in USA. Mitsubishi Heavy Industries Technical Review 49 (1), 37-43 (2012).
[6] R . Khosrokhavar, Mechanisms for CO2 sequestration in geological formations and enhanced gas recovery. Springer Theses (2016). DOI: https://doi.org/10.4233/uuid:a27f5c1d-5fd2-4b1e-b757-8839c0c4726c
[7] D . Liu, Y. Li, S. Yang, R.K. Agarwal, CO2 sequestration with enhanced shale gas recovery. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 43 (24) 1-11 (2019). DOI: https://doi.org/10.1080/15567036.2019.1587069
[8] R . Heller, M. Zoback, Adsorption of methane and carbon dioxide on gas shale and pure mineral samples. Journal of Unconventional Oil and Gas Resources 8, 14-24 (2014). DOI: https://doi.org/10.1016/j.juogr.2014.06.001
[9] J.A. Cecilia, C. García‐Sancho, E. Vilarrasa‐García, J. Jiménez‐Jiménez, E. Rodriguez‐Castellón, Synthesis, Characterization, Uses and Applications of Porous Clays Heterostructures: A Review. Chem. Rec. 18, 1085-1104 (2018). DOI: https://doi.org/10.1002/tcr.201700107
[10] O.P. Ortiz Cancino, D. Peredo Mancilla, M. Pozo, E. Pérez, D. Bessieres, Effect of Organic Matter and Thermal Maturity on Methane Adsorption Capacity on Shales from the Middle Magdalena Valley Basin in Colombia. Energy Fuels 31, 11698-11709 (2017). DOI: https://doi.org/10.1021/acs.energyfuels.7b01849
[11] S. Zhou, H. Xue, Y. Ning, W. Guo, Q. Zhang, Experimental study of supercritical methane adsorption in Longmaxi shale: Insights into the density of adsorbed methane. Fuel 211, 140-148 (2018). DOI: https://doi.org/10.1016/j.fuel.2017.09.065
[12] H . Bi, Z. Jiang, J. Li, P. Li, L. Chen, Q. Pan, Y. Wu, The Ono-Kondo model and an experimental study on supercritical adsorption of shale gas: A case study on Longmaxi shale in southeastern Chongqing, China. J. Nat. Gas Sci. Eng. 35, 114-121 (2016). DOI: https://doi.org/10.1016/j.jngse.2016.08.047
[13] M. Gasparik, P. Bertier, Y. Gensterblum, A. Ghanizadeh, B.M. Krooss, R. Littke, Geological controls on the methane storage capacity in organic-rich shales. Int. J. Coal Geol., Special issue: Adsorption and fluid transport phenomena in gas shales and their effects on production and storage 123, 34-51 (2014). DOI: https://doi.org/10.1016/j.coal.2013.06.010
[14] X. Luo, S. Wang, Z. Wang, Z. Jing, M. Lv, Z. Zhai, T. Han, Adsorption of methane, carbon dioxide and their binary mixtures on Jurassic shale from the Qaidam Basin in China. Int. J. Coal Geol. 150, 210-223 (2015). DOI: https://doi.org/10.1016/j.coal.2015.09.004
[15] L . Wang, Q. Yu, The effect of moisture on the methane adsorption capacity of shales: A study case in the eastern Qaidam Basin in China. J. Hydrol. 542, 487-505 (2016). DOI: https://doi.org/10.1016/j.jhydrol.2016.09.018
[16] S.M. Kang, E. Fathi, R.J. Ambrose, I.Y. Akkutlu, R.F. Sigal, Carbon Dioxide Storage Capacity of Organic-Rich Shales. SPE J. 16, 842-855 (2011). DOI: https://doi.org/10.2118/134583-PA
[17] D .L. Gautier, J.K. Pitman, R.R. Charpentier, T. Cook, T.R. Klett, C.J. Schenk, Potential for Technically Recoverable Unconventional Gas and Oil Resources in the Polish-Ukrainian Foredeep. USGS Fact Sheet, 2012-3102 (2012).
[18] R . McCarthy, V. Arp, A New Wide Range Equation of State for Helium. Advances in Cryogenic Engineering 35, 1465-1475 (1990).
[19] R . Span, W. Wagner, A New Equation of State for Carbon Dioxide Covering the Fluid Region from the Triple‐Point Temperature to 1100 K at Pressures up to 800 MPa. Journal of Physical and Chemical Reference Data 25 (6), 1509-1596 (1996). DOI: https://doi.org/10.1063/1.555991
[20] U . Setzmann, W. Wagner, A New Equation of State and Tables of Thermodynamic Properties for Methane Covering the Range from the Melting Line to 625 K at Pressures up to 100 MPa. Journal of Physical and Chemical Reference Data 20, 1061-1155 (1991). DOI: https://doi.org/10.1063/1.555898
[21] M. Lutynski, M. A. Gonzalez Gonzalez, Characteristics of carbon dioxide sorption in coal and gas shale – The effect of particle size. Journal of Natural Gas Science and Engineering 28, 558-565. DOI: https://doi.org/10.1016/j.jngse.2015.12.037
[22] R . Aguilera, Shale gas reservoirs: Theoretical, practical and research issues. Petroleum Research 1 (1), 10-26 (2016). DOI: https://doi.org/10.1016/S2096-2495(17)30027-3
[23] H . Belyadi, E. Fathi, F. Belyadi, Hydraulic fracturing in unconventional reservoirs: theories, operations, and economic analysis. Gulf Professional Publishing (2016).
[24] K . Sepehrnoori, Y. Wei, Shale Gas and Tight Oil Reservoir Simulation. Elsevier (2018). DOI: https://doi.org/10.1016/ C2017-0-00263-X
[25] R .J. Ambrose, R.C Hartman, M. Diaz-Campos, I.Y. Akkutlu, C.H. Sondergeld, New Pore-scale Considerations for Shale Gas in Place Calculations. Presented at the SPE Unconventional Gas Conference, Society of Petroleum Engineers (2010). DOI: https://doi.org/10.2118/131772-MS
[26] R .J. Ambrose, R.C. Hartman, M. Diaz Campos, I.Y. Akkutlu, C.H. Sondergeld, Shale Gas-in-Place Calculations Part I: New Pore-Scale Considerations. Spe Journal 17 (01), 219-229 (2012). DOI: https://doi.org/10.2118/131772-PA
[27] P. Such, Co to właściwie znaczy porowatość skał łupkowych. Nafta-Gaz LXX (7), 411-415 (2014).

[1] A . Kidybiński, J. Gwiazda, Z. Hładysz, Ocena mechanicznych własności skał oraz stateczności górotworu hydraulicznym penetrometrem otworowym. Prace Głównego Instytutu Górnictwa, Seria Dodatkowa. Katowice (1976).
[2] R.E. Goodman, T.K. Van, F.E. Heuze, Measurement of Rock Deformability in Boreholes. In: Proceedings of the 10th U.S. Symposium on Rock Mechanics, University of Texas, Austin, TX, 523-555 (1970).
[3] AS TM D4971-02, Standard Test Method for Determining the In situ Modulus of Deformation of Rock Using the Diametrically Loaded 76-mm (3-in.) Borehole Jack. AS TM International, West Conshohocken, PA, (2002). DOI : https://doi.org/10.1520/D4971-16
[4] R. Pierszalik, S. Rajwa, A. Walentek, K. Bier, 2020. A Pen206 borehole jack suitability assessment for rock mass deformability determination. Arch. Min. Sci. 65 (3), 639-660 (2020). DOI : https://doi.org/10.24425/ams.2020.134135
[5] P.H.V. Nguyen, M. Rotkegel, H.D. Van, Analysis of Behaviour of the Steel Arch Support in the Geological and Mining Conditions of the Cam Pha Coal Basin, Vietnam. Arch. Min. Sci. 65 (3), 551-567 (2020). DOI : https://doi.org/10.24425/ams.2020.134134
[6] A . Walentek, T. Janoszek, S. Prusek, A. Wrana, Influence of longwall gateroad convergence on the process of mine ventilation network-model tests. International Journal of Mining Science and Technology 29, 585-590 (2019). DOI : https://doi.org/10.1016/j.ijmst.2019.06.013
[7] I RB Ogrodzieniec. Penetrometr otworowy typu Pen206. Dokumentacja techniczno-ruchowa + Załącznik A – pulpit Pen206E (2008).
[8] A . Nierobisz, Oznaczanie własności mechanicznych skał za pomocą hydraulicznego penetrometru otworowego nowej generacji. Górnictwo i Geoinżynieria 34 (2), 491-500 (2010).
[9] A . Nierobisz, J. Gawryś, K. Bier, Analiza konstrukcji hydraulicznego penetrometru otworowego i jego modernizacja dla zwiększenia zakresu pomiarowego. Przegląd Górniczy 72 (6), 1-15 (2016).
[10] F .E. Heuze, Estimating the Deformability and Strength of Rock Masses – In-Situ Tests, and Related Procedures. In: STRATCOM Advanced Concept Technology Demonstration (ACTD), Albuquerque (2003). DOI : https://doi.org/10.2172/15005085
[11] M. Rezaei, M. Ghafoori, R. Ajalloeian, Comparison between the In situ Tests’ Data and Empirical Equations for Estimation of Deformation Modulus of Rock Mass. Geosciences Research 1 (1), 47-59 (2016). DOI : https://doi.org/10.22606/gr.2016.11005
[12] A . Palmström, R. Singh, The deformation modulus of rock masses – comparisons between in situ tests and indirect estimates. Tunnelling and Underground Space Technology 16 (3), 115-131 (2001). DOI : https://doi.org/10.1016/S0886-7798(01)00038-4
[13] M. Bukowska, A. Kidybiński, Wpływ czynników naturalnych masywu skalnego na jego wytrzymałość określaną metodami penetrometryczną i laboratoryjną. Prace Naukowe Głównego Instytutu Górnictwa, Research reports mining and environment 1, 35-46 (2002).

[1] M.J. McPherson, Subsurface Ventilation and Environmental Engineering. 1th edn, Springer Science & Business Media, New York 1993.
[2] K. Chen, J. Si, F. Zhou, R. Zhang, H. Shao, H. Zhao, Optimization of air quantity regulation in mine ventilation networks using the improved differential evolution algorithm and critical path method. Int. J. Min. Sci. Technol 25, 1, 79-84 (2015). DOI: https://doi.org/10.1016/j.ijmst.2014.11.001
[3] J. Huang, A study on optimization of control algorithm and key technologies of 3D visualization for mine ventilation system. PhD. Central South University, 2012.
[4] A.P. Sasmito, E. Birgersson, H.C. Ly, A.S. Mujumdar, Some approaches to improve ventilation system in underground coal mines environment – A computational fluid dynamic study. Tunnelling and Underground Space Technology 34, 82-95 (2013). DOI: https://doi.org/10.1016/j.tust.2012.09.006
[5] C. Xie, H. Nguyen, X. Bui, V. Nguyen, J. Zhou.Predicting roof displacement of roadways in underground coal mines using adaptive neuro-fuzzy inference system optimized by various physics-based optimization algorithms. Journal of Rock Mechanics and Geotechnical Engineering 13 (6), 1452-1465 (2021). DOI: https://doi.org/10.1016/j.jrmge.2021.07.005
[6] E. Acuña, I. Lowndes, A Review of Primary Mine Ventilation System Optimization. Interfaces 44, 163-175 (2014). DOI: https://doi.org/10.1287/inte.2014.0736
[7] H . Si, Dynamic Monitoring of Airflow Parameters and Air Quantity Regulation Optimization for Mine Ventilation System. PhD, University of Mining and Technology, 2012.
[8] L.H. Cheng, T.H. Ueng, C.W. Liu, Simulation of ventilation and fire in the underground facilities. Fire Saf. J 36, 6, 597-619 (2001). DOI: https://doi.org/10.1016/S0379-7112(01)00013-3
[9] T . Isobe, H. Nohara, Y. Tominaga, T. Sato, Y. Ishijima, An Analytical Investigation of Mine Ventilation Network Using a Graph Theory: Calculating method of underground roadway network using graph theory (2nd Report) 95, 337-341 (1979).
[10] A.T.J. Moll, I.S. Lowndes, Graph theory applied to mine ventilation analysis. Bulletin. The Institute of Mathematics and its Applications, 28 1992.
[11] Y. Hu, O.I. Koroleva, M. Krstić, Nonlinear control of mine ventilation networks. Systems & Control Letters 49, 4, 239-254 (2003). DOI: https://doi.org/10.1016/S0167-6911(02)00336-5
[12] T .H. Ueng, Y.J. Wang, Analysis of mine ventilation networks using nonlinear programming techniques. International Journal of Mining Engineering 2, 3, 245-252 (1984).
[13] X.S. Wu, E. Topuz, Analysis of mine ventilation systems using operations research methods. International Transactions in Operational Research 5, 4, 245-254 (1998). DOI: https://doi.org/10.1016/S0969-6016(97)00011-7
[14] G . Xu, J. Huang, B. Nie, D. Chalmers, Z. Yang, Calibration of Mine Ventilation Network Models Using the Non- Linear Optimization Algorithm. Energies 11, 1, 31 (2017).
[15] M.O. Bustamante-Rúa, A.J. Daza-Aragón, P. Bustamante-Baena, Simulation software VENTSIM™ the influence of implementation of work abandoned sealings ventilation of an underground coal mine. Boletín de Ciencias de la Tierra 90, 43, 5-13 (2018).
[16] C. Pritchard, Validation of the Ventgraph program for use in metal /non-metal mines. Proceedings of the 13th U.S./ North American Mine Ventilation Symposium, Sudbury, Ontario, Canada, 455-462 (2010).
[17] F. Wei, F. Zhu, H. Lv, The Use of 3D Simulation System in Mine Ventilation Management. Procedia Eng. 26, 1370-1379 (2011). DOI: https://doi.org/10.1016/j.proeng.2011.11.2313
[18] A. Krach, Determining diagonal branches in mine ventilation networks. Arch. Min. Sci. 59, 4, 1097-1105 (2014). DOI: https://doi.org/10.2478/amsc-2014-0076
[19] G . Pach, Optimization of forced air flow by the comparison of positive and negative regulations in mine ventilation network. Arch. Min. Sci. 63, 4, 853-870 (2018). DOI: https://doi.org/10.24425/ams.2018.124980
[20] S.J. Bluhm, W.M. Marx, F.H. Von Glehn, et al. VUMA mine ventilation software [J]. J. Mine Vent. Soc. S. Afr. 54 (3), 65-72 (2001).
[21] A. Chatterjee, L. Zhang, X. Xia, Optimization of mine ventilation fan speeds according to ventilation on demand and time of use tariff Applied. Energy 146, 65-73 (2015). DOI: https://doi.org/10.1016/j.apenergy.2015.01.134
[22] D.R. Scott, F.B.Hinsley, Ventilation Network Theory. Colliery Eng. 28, 326, 159-66 (1951).
[23] W. Trutwin, Use of Digital Computers for the Study of Non-Steady States and Automatic Control Problems in Mine Ventilation Networks. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 9 (2), 289-323 (1972).
[24] Y .J. Wang, A critical path approach to mine ventilation networks with controlled flow. Society Mining Engineering AIME 1981 272,1862-72 (1977).
[25] R.L. Xu, S.R. Shi, The path method of the regulation of air quantity in the mine ventilation network. Journal FuXin Mining Institute 3, 3, 21-30 (1984).
[26] W. Hu, I. Longson, A computer method for the generalized controlled flow problem in ventilation networks. Min. Sci. Technol. 8 (2), 153-167 (1989). DOI: https://doi.org/10.1016/S0167-9031(89)90563-X
[27] H . Wang, Theory and algorithm of mine ventilation network. University of Mining and Technology press, Xu Zhou 1996.
[28] K.Y. Volokh, On foundations of the Hardy Cross method. Int. J. Solids Struct. 39, 16, 4197-4200 (2002). DOI: https://doi.org/10.1016/S0020-7683(02)00345-1
[29] Y .J. Wang, Solving mine ventilation networks with fixed and non-fixed branches. Mining Engineering (Littleton, Colorado) 42, 12 (1990).
[30] E. Acuña, S. Hall, I. Lowndes, Free and semi controlled splitting network optimisation using gas to justify the use of regulators. IV International Conference of Mining Innovation, 369-393 (2010).
[31] W. Dziurzyński, A. Krach, T. Pałka, Airflow Sensitivity Assessment Based on Underground Mine Ventilation Systems Modeling. Energies 10, 10, 1451 (2017). DOI: https://doi.org/10.3390/en10101451
[32] Y . Li, X.Pan, The algorithm research of demand sub-wind based on path. Mod. Min. 6, 60-61 (2010).
[33] H . An, J. Shi, X. Wang, L. Lyu, Application Of Depth – First Search Method In Finding Recirculation In Mine Ventilation System. Stavební obzor – Civil Engineering Journal 26, 286-295 (2017). DOI: https://doi.org/10.14311/CEJ.2017.03.0024
[34] J. Liu, J. Jia, B. Yu, Algorithm of ventilation network with unidirectional circuit. Journal of Liaoning Technical University 23, 721-724 (2013).
[35] I . Lowndes, G.C. Dandy, T.S. Marshall, T.B. Schmidt, N.G. Simpson, G.P. Raynor, Optimization of mine ventilation networks using genetic algorithms and artificial neural networks. Paper presented at the US/North American Mine Ventilation Symposium, Sudbury, Ontario, Canada, 441-447 (2010).
[36] X. She, Y. Sun, Research on optimization algorithm wind quantity distribution in ventilation networks based on generic algorithm. International Conference on Computational Intelligence & Natural Computing, 154-158 (2010). DOI: https://doi.org/10.1109/CINC.2010.5643869
[37] M.C. Luvar, C. Lupu, V.Arad, D. Cioclea, V.M. Păsculescu, N. Mija, Computerized simulation of mine ventilation networks for sustainable decision making process. Environ. Eng. Manage. J. 13, 1445-1451 (2014).
[38] L. Wei, F. Zhou, H. Zhu, Topology theory of ventilation network and path algorithm. J. China Coal Soc. 3, 926-930 (2008). DOI: https://doi.org/10.1109/CINC.2010.5643869
[39] J. Liu, Fluid network theory. China Coal Industry Publishing House, Beijing 2002. [40] D.Y. Zhong, L.G. Wang, L. Bi, J.M. Wang, Z.H. Zhu, Algorithm of complex ventilation network solution based on circuit air-quantity method. J. China Coal Soc. 40 (02), 365-370 (2015).

[1] S .R. Deokar, J.S. Wakode, Coal Mine Safety Monitoring and Alerting System. International Research Journal of Engineering and Technology 4, 3, 2146-2149 (2017).
[2] D .A. Jakkan, P. Bhagat, Coal Mine Monitoring System Based on Wireless Technology and ARM . International Journal of Engineering Research 2, 6 (2013).
[3] M . Li, Y. Liu, Underground Coal Mine Monitoring with Wireless Sensor Networks. ACM Trans. Sen. Netw. 5, 1-29 (2009). DOI : https://doi.org/10.1145/1498915.1498916
[4] L . Liao, G. Lou, M. Chen, An Integrated RFID and Sensor System for Emergency Handling in Underground Coal Mines Environments. In J. Zheng, S. Mao, S.F. Midkiff, H. Zhu, (Eds.); Ad Hoc Networks, Springer Berlin Heidelberg 28, 818-824 (2010). DOI : https://doi.org/10.1007/978-3-642-11723-7_56 [5] F . Ma, Sensor Networks-Based Monitoring and Fuzzy Information Fusion System for Underground Gas Disaster. In Proceedings of the 2012 9th International Conference on Fuzzy Systems and Knowledge Discovery, 596-600 (2012).
[6] M .A. Moridi, M. Sharifzadeh, Y. Kawamura, H.D. Jang, Development of Wireless Sensor Networks for Underground Communication and Monitoring Systems (the Cases of Underground Mine Environments). Tunneling and Underground Space Technology 73, 127-138 (2018). DOI : https://doi.org/10.1016/j.tust.2017.12.015
[7] A . Zagórecki, Application of Sensor Fusion and Data Mining for Prediction of Methane Concentration in Coal Mines. Mining – Informatics, Automation and Electrical Engineering 43, 4 (2015).
[8] H . Zhao, W. Yang, An Emergency Rescue Communication System and Environmental Monitoring Subsystem for Underground Coal Mine Based on Wireless Mesh Network. Int. J. Distrib. Sens. N. 14, (2018). DOI : https://doi.org/10.1177/1550147718805935
[9] Polish Legal Act, Dz.U. 2017 poz. 1118, Rozporządzenie Ministra Energii z Dnia 23 Listopada 2016 r.
[10] A . Tomczyk, K. Rutecki, Monitorowanie i Kontrola Zmian Ciśnienia Atmosferycznego Kopalni dla Potrzeb Bezpieczeństwa. Mechanizacja i Automatyzacja Górnictwa 47, 7, 99-107 (2009).
[11] S . Wasilewski, Modern Systems of Gas Hazard Monitoring in Polish Hard Coal Mines. Arch. Min. Sci. 53, 4, 511-524 (2008).
[12] H . Badura, D. Araszczuk, Analiza Zagrożenia Metanowego w Ścianie G-6 w Pokładzie 412\lg+\ld i 412\lg w KWK „A” – Studium Przypadku. Przegląd Górniczy 73, 47-55 (2017).
[13] W . Dziurzyński; P. Skotniczny, J. Krawczyk, M. Gawor, T. Pałka, P. Ostrogórski, J. Kruczkowski, J. Janus, Wytyczne Rozmieszczenia Anemometrów Stacjonarnych Wzdłuż Długości Wyrobiska Kopalni jak i w Samym Polu Przekroju Poprzecznego Wyrobiska. In: Zasady pomiarów przepływów powietrza w wyrobiskach kopalnianych. Wybrane sposoby kontroli i kalibracji przyrządów pomiarowych (2017).
[14] J. Kruczkowski, Rozkład Stężeń Metanu w Wyrobiskach Przyścianowych. In Zagrożenia aerologiczne w kopalniach węgla kamiennego – profilaktyka, zwalczanie, modelowanie, monitoring; Główny Instytut Górnictwa (2013).
[15] P. Skotniczny, Transient States in the Flow of the Air-Methane Mixture at the Longwall Outlet, Induced by a Sudden Methane Outflow. Arch. Min. Sci. 59, 4, 887-896 (2014). DOI : https://doi.org/10.2478/amsc-2014-0061
[16] A . Zagórecki, Prediction of Methane Outbreaks in Coal Mines from Multivariate Time Series Using Random Forest. In Proceedings of the Rough Sets, Fuzzy Sets, Data Mining, and Granular Computing; Y. Yao, Q. Hu, H. Yu, J.W. Grzymala-Busse, (Eds.) Springer International Publishing: Cham, 494-500 (2015).
[17] H . Badura, A. Niewiadomski, Jednodniowe prognozy średniego stężenia metanu na wylocie z rejonu wentylacyjnego jako podstawa do doboru środków profilaktyki metanowej – studium przypadku. Przegląd Górniczy 71, 12 (2015).
[18] M . Uszko, L. Kloc, M. Szarafiński, H. Potoczek, Zagrożenia Naturalne w Kopalniach Kompanii Węglowej SA . Część III . Zagrożenie Metanowe. Wiadomości Górnicze 65, 1 (2014).
[19] P. Skotniczny, P. Ostrogórski, Three-Dimensional Air Velocity Distributions in the Vicinity of a Mine Heading’s Sidewall. Arch. Min. Sci. 63, 2, 335-352 (2018). DOI : https://doi.org/10.24425/122451
[20] https://www.wug.gov.pl/english/statistics, accessed: 17.11.2021.
[21] P. Ostrogórski, Sieć Ad Hoc Złożona z Metanomierzy Indywidualnych – Modelowanie i Symulacja. In 10 Szkoła Aerologii Górniczej (2019).
[22] J. Kruczkowski, P. Ostrogórski, Metanoanemometr SOM 2303. In Nowoczesne metody zwalczania zagrożeń aerologicznych w podziemnych wyrobiskach górniczych, Główny Instytut Górnictwa, 117-127 (2015).