Eco-friendly leather processes based on the usage of natural products have become a potentially attractive issue for leather industry during the last few decades. Synthetic protective chemicals like bactericides used in most soaking process are known as hazardous substances and cause tannery effluents with high concentrations of Chemical Oxygen Demand (COD). In the present study, the effect of tannic acid on microorganisms, skin, wool and effluent were investigated in order to demonstrate the applicability of tannic acid in soaking process instead of commonly used bactericides. The bacterial load (cfu/ml), COD and Nitrogen Content (N) of the soaking effluents and Total Kjeldahl Nitrogen (TKN) content of skins and wools were investigated. Application of 0.5 and 1 wt% tannic acid concentrations was more effective than commercial bactericide, while comparable results were achieved by 0.1 and 0.3 wt% tannic acid. The application of tannic acid for soaking process resulted in lower COD and N values of effluents. The results show that tannic acid has the potential to be an alternative, eco-friendly bactericide for leather industry by reducing the pollution of leather soaking process.
The accumulation and translocation of trace metals in soil and in sugarcane crop irrigated with treated effluents from sugar industry compared to soil and sugarcane crop irrigated with bore-well water were determined. In the present study the impact of irrigation with treated effluent from the sugar industry on the trace metal contamination of sugarcane juice was assessed. It revealed that the mean concentrations of Cd, Pb, Cu, Mn and Zn in the soil of fields irrigated with effluent and in juice from sugarcane grown on such fields were higher than those from bore-well water irrigated fields. The concentrations of trace metals in treated effluent exceeded the permissible limits of the Indian standards (Central Pollution Control Board-2000). The concentrations of Cd, Pb, Cu and Zn in juice of sugarcane grown on fields irrigated with effluent also exceeded the permissible limits of Indian standards and WHO/FAO expert committee recommendations. Their concentrations in juice of sugarcane grown in fields irrigated with bore-well water were within the limits of safety, except for Cd. The transfer factor for Zn was considerably higher than those of the other trace metals. The metal concentrations of sugarcane juice showed significant correlations with those of soil, which was not the case when bore well water was used for irrigation.
The presented studies were focused on evaluating the utility of one of sequential extraction methods for evaluating the bioavailability of mercury in soils polluted by this element. Soil samples collected from horizons 0-20 cm and 20-80 cm were subject to analysis of the basic physical and chemical properties of soils. Moreover, the total content of mercury was determined and sequential extraction of mercury was conducted using a modified five-stage Wallschläger method. The analyses show that the studied soils are characterized by a variable mercury content, the highest in the surface soil horizons. Sequential extraction of mercury in the analyzed soils has indicated that the highest percentage content in the total content had mercury linked with sulphides. A high content of mercury linked with organic matter was also noted. The content of bioavailable mercury did not exceed 1.5% of the total content.
The effects of different volumetric ratios of bulking agents to pulp/paper-mill sludge on composting were studied. Rice husk and corncob were used as bulking agents. Volumetric ratios of bulking agents to pulp/paper-mill sludge were used as 10:100 and 25:100. To monitor the evolution of the composting systems, routine parameters such as temperature, moisture, pH, total N, NH4 +-N, NO3 --N, total C, and C/N ratio were analyzed. The results indicated that the agro-based materials significantly affected compost maturity parameters. Moreover, the quality of the product obtained in the composting process treated with the agro-based materials achieved satisfactory stabilization and sanitation for application to land.
This study illustrates the benefits of statistical techniques to analyze spatial and temporal variations in water quality. In this scope water quality differentiation caused by anthropogenic and natural factors in the Tahtali and Balçova reservoirs in western Turkey was investigated using discriminant analysis-DA, Mann Whitney U techniques. Effectiveness of pollution prevention measures was analyzed by Mann Kendall and Sen’s Slope estimator methods. The water quality variables were divided into three groups as physical-inorganic, organic and inorganic pollution parameters for the study. Results showed that water quality between reservoirs was differentiated for “physical-inorganic” and “organic pollution” parameters. Degree of influence of water quality by urbanization was higher in the Tahtali reservoir and in general, no trend detection at pollution indicators explained by effective management practices at both sites.
The results from the experimental research are presented in the abstract. The experimental research involved utilization of the sludge from the mine water treatment plant of Coal Quarry ČSA/Czechoslovak Army/ (hereinafter “ČSA”) and Coal Quarry Jana Švermy (hereinafter “JŠ”) in the segment of thermal insulation mortars. The mine water treatment is described below including chemical and mineralogical sludge composition as the additional component of the binding material in the polyurethane thermal insulation mortars. Furthermore the composition of experimental mixtures of the thermal insulation polyurethane mortar is presented in the work and its physical-mechanical properties. The monitored elements included the strength characteristics, heat conductivity coefficient λ, and water vapour diffusion coefficient μ.
The article presents the results of plasma vitrification of solid remnants from thermal waste treatment with and without the addition of a carbonate fraction obtained from lead-zinc ore flotation. The substrates used in the research were slags and ashes from medical waste treatment, incineration of municipal waste, sewage sludge as well as hazardous and industrial wastes.
The plasma treatment resulted in acquiring products of different quality depending on the processed substrate. Most of the obtained products were of vitreous and homogenic build. Treatment of remnants from incineration of hazardous and industrial wastes resulted in obtaining heterogeneous and rough surfaced products. A 20% share of the carbonate fraction enabled the obtaining of a vitrified product with a glassy surface and fracture. Hardness of the obtained products was rated in Mohs scale and ranged from 6 to 6,5. Leaching tests showed a decrease in heavy metal concentration in the leachates from vitrificates with the addition of carbonate fraction compared to the ones with it.
“Wartowice” tailings pond was closed in 1989, resulting in 232,4 ha tailings pile requiring reclamation. The major problem is heavy metals presence and poor nutrient conditions and physicochemical structure of soil which disturbs the plants development. In order to assess the real condition of studied area the complete biological characteristic has been done. The physicochemical conditions were assessed altogether with phytosociological, microbiological and toxicological studies of deposits. We recorded only 27 species of vascular plants belonging to 15 families on the tailings pond of which 5 belong to Rosaceae, 4 to Asteraceae and 3 to Poaceae and Saliceae. Species inhabiting the tailings depended on their dispersal capacity, metal tolerance and rhizome strategy. Microbiological analyses revealed the low number of bacteria and fungi on the tailings pond, apart from the small uplift area where the plants were indentified. Bacteria identified on the tailings pond were classified to 8 genera. The low number of bacteria suggests the lack of nutrients which affects the development of soil microflora. Toxicity tests showed that post-flotation sludge is not toxic to microorganisms because of its high pH. Some plants, such as lucerne could even influence positively the microorganisms development what has been proved in our studies. The tailings toxicity was higher towards producers, where Secale cereale appeared to be the most sensitive species. Amendment with topsoil from adjacent areas can influence positively the phytotoxic properties of tailings and enrich them into native seeds.
This paper presents the impact of salinisation on the aquatic mollusc fauna in flooded mine subsidences in the Karvina region (Czech Republic). The results of the previous research on salinity in flooded mine subsidences show that some of them contain a high content of dissolved inorganic substances (above 1000 mg·l-1). These substances can affect the vegetation and animals occurring in the water and the surrounding area. The phylum of Mollusca was selected as a model group for the fieldwork as it includes species with the proven bioindication potential.
The occurrence of aquatic mollusc species was studied at 10 sites. The sites were selected based on the content of dissolved substances (the salinity gradient from <500 to >1000 mg·l-1. A total of 12 aquatic mollusc species were found, including one species identified as a potential bioindicator of the negative effect of salinisation on aquatic biota.
The analysis showed statistically significant positive correlations between the content of dissolved inorganic substances and the presence of alien species Potamopyrgus antipodarum (J.E. Gray, 1843). The gradient of salinity significantly affects the species composition of the mollusc fauna in flooded mine subsidences and may affect the biodiversity of this group.
Studies were conducted using a 10-chamber Micro-Oxymax (Columbus, OH, USA) respirometer to determine the effect of bioaugmentation, biostimulation and combination of them on enhancing intrinsic biodegradation of oil hydrocarbons in soil. Contaminated soil was collected from a former military airport in Kluczewo, Poland. Bioaugmentation was realized by addition of indigenous or exogenous bacteria to soil. Biostimulation was done by aerated water supply and surfactant addition. Bioaugmentation + addition of a surfactant was applied as the combined treatment. The intrinsic and enhanced hydrocarbons biodegradation rates were estimated from the slopes of linear regressions of cumulative curves of O2 uptake. Pertinent biodegradation rates were recalculated on the basis of the stoichiometric reaction (mass balance equation) and conversion equation. The results showed that combined treatment (indigenous bacteria bioaugmentation + addition of a surfactant) was the most effective method of biodegradation enhancement as the 20-fold increase of biodegradation rate was observed.
Samples of steam coal used in heat and power plants as well as densimetric fractions obtained on a laboratory scale by dense organic liquid separation have been examined. The contents of ash, mercury, chromium, cadmium, copper, nickel and lead have been determined in coal, in the light and medium fraction as well as in the refuse. The degree of removal of mineral matter and the examined heavy metals as well as the coal combustible parts yield have been determined. Examination of 5 coals revealed that it is possible to remove 41% of mercury and more than 35% of other heavy metals bound to mineral matter in coal.