Archive of Mechanical Engineering

[1] V.H. Arakelian and S. Briot. Balancing of Linkages and Robot Manipulators. Advanced Methods with Illustrative Examples. Springer, 2015.
[2] P. Wang and Q. Xu. Design and modeling of constant-force mechanisms: A survey. Mechanism and Machine Theory, 119:1–21, 2018. doi: 10.1016/j.mechmachtheory.2017.08.017.
[3] V. Arakelian and M. Mkrtchyan. Design of scotch yoke mechanisms with balanced input torque. In Proceedings of the ASME 2015 International Design Engineering Technical Conferences \amp Computers and Information in Engineering Conference IDETC/CIE 2015, pages 1–5, Boston, Massachusetts, USA, 2–5 August, 2015. doi: 10.1115/DETC2015-46709.
[4] J.A. Franco, J.A. Gallego, and J.L. Herder. Static balancing of four-bar compliant mechanisms with torsion springs by exerting negative stiffness using linear spring at the instant center of rotation. Journal of Mechanisms and Robotics, 13(3):031010–13, 2021. doi: 10.1115/1.4050313.
[5] B. Demeulenaere and J. De Schutter. Input torque balancing using an inverted cam mechanism. Journal of Mechanical Design, 127(5):887–900, 2005. doi: 10.1115/1.1876452.
[6] D.A. Streit and E. Shin. Equilibrators for planar linkages. Journal of Mechanical Design, 115(3):604–611, 1993. doi: 10.1115/1.2919233.
[7] Y. Liu, D.P. Yu, and J. Yao. Design of an adjustable cam based constant force mechanism. Mechanism and Machine Theory, 103:85–97, 2016. doi: 10.1016/j.mechmachtheory.2016.04.014.
[8] J.L. Herder. Design of spring force compensation systems. Mechanism and Machine Theory, 33(1-2):151–161, 1998. doi: 10.1016/S0094-114X(97)00027-X.
[9] S.R. Deepak and G.K. Ananthasuresh. Static balancing of a four-bar linkage and its cognates. Mechanism and Machine Theory, 4:62–80, 2012. doi: 10.1016/j.mechmachtheory.2011.09.009.
[10] S. Perreault, P. Cardou, and C. Gosselin. Approximate static balancing of a planar parallel cable-driven mechanism based on four-bar linkages and springs. Mechanism and Machine Theory, 79:64–79, 2014. doi: 10.1016/j.mechmachtheory.2014.04.008.
[11] J. Buśkiewicz. The optimum distance function method and its application to the synthesis of a gravity balanced hoist. Mechanism and Machine Theory, 139:443–459, 2019. doi: 10.1016/j.mechmachtheory.2019.05.006.
[12] V.L. Nguyen. A design approach for gravity compensators using planar four-bar mechanisms and a linear spring. Mechanism and Machine Theory, 172:104770, 2022. doi: 10.1016/j.mechmachtheory.2022.104770.
[13] R. Barents, M. Schenk, W.D. van Dorsser, B.M. Wisse, and J.L. Herder. Spring-to-spring balancing as energy-free adjustment method in gravity equilibrators. Journal of Mechanical Design, 133(6):689–700, 2011. doi: 10.1115/DETC2009-86770.
[14] I. Simionescu and L. Ciupitu. The static balancing of the industrial robot arms, Part I: discrete balancing. Mechanism and Machine Theory, 35(9):1287–1298, 2001. doi: 10.1016/S0094-114X(99)00067-1.
[15] A.G. Erdman and G.N. Sandor. Mechanism Design: Analysis and Synthesis, Vol. 1, 4th ed., Prentice-Hall, Upper Saddle River, NJ, 2001.
[16] G.N. Sandor and A.G. Erdman. Advanced Mechanism Design: Analysis and Synthesis, Vol. 2, Prentice Hall, Englewood Cliffs, NJ, 1997.
[17] J.M. McCarthy and G.S. Soh. Geometric Design of Linkages, Vol. 11, Springer, New York, 2011.
[18] H. Kaustubh, J. Sonawale, and J.M. McCarthy. A design system for six-bar linkages integrated with a solid modeler. Journal of Computing and Information Science in Engineering, 15(4):041002, 2015. doi: 10.1115/1.4030940.
[19] J. Han and W. Liu. On the solution of eight-precision-point path synthesis of planar four-bar mechanisms based on the solution region methodology. Journal of Mechanisms and Robotics, 11(6):064504, 2019. doi: 10.1115/1.4044544.
[20] C.W. Wampler, A.P. Morgan, and A.J. Sommese. Complete solution of the nine-point path synthesis problem for four-bar linkages. Journal of Mechanical Design, 114(1):153–159, 1992. doi: 10.1115/1.2916909.
[21] W. Guo and X. Wang. Planar linkage mechanism design for bi-objective of trajectory and velocity. J Beijing Univ Aero Astronautics, 35(12):1483–1486, 2009.
[22] J. Han, W. Qian, and H. Zhao. Study on synthesis method of $\lambda$-formed 4-bar linkages approximating a straight line. Mechanism and Machine Theory, 44(1):57–65, 2009. doi: 10.1016/j.mechmachtheory.2008.02.011.
[23] J.E. Holte, T.R. Chase, and A.G. Erdman. Approximate velocities in mixed exact-approximate position synthesis of planar mechanisms. Journal of Mechanical Design, 123(3):388–394, 2001. doi: 10.1115/1.1370978.
[24] W.T. Lee and K. Russell. Developments in quantitative dimensional synthesis (1970–present): Four-bar path and function generation. Inverse Problems in Science and Engineering, 26(9):1280–1304, 2017. doi: 10.1080/17415977.2017.1396328.
[25] C. Wampler and A. Sommese, Numerical algebraic geometry and algebraic kinematics. Acta Numerica, 20:469–567, 2011. doi: 10.1017/S0962492911000067.
[26] D.A. Brake, J.D. Hauenstein, A.P. Murray, D.H. Myszka, and C.W. Wampler. The complete solution of alt-burmester synthesis problems for four-bar linkages. Journal of Mechanisms and Robotics, 8(4): 041018, 2016. doi: 10.1115/1.4033251.
[27] J. Buśkiewicz, 2019, Gravity balancing of a hoist by means of a four-bar linkage and spring. In: Advances in Mechanism and Machine Science: Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science, pages 1721–1730, Cracow, Poland, June, 2019. doi: 10.1007/978-3-030-20131-9_170.
[28] J. Buśkiewicz. Solution data, the code of algorithm 6dv2s_II in Mathematica wolfram 8.0 and pdf file of the code, the figures of the spring extensions and the rates of the spring extensions for all the cases. Mendeley Data, V3, 2022, https://data.mendeley.com/datasets/sb38dsw6vm/3.

[1] D. Trivedi, C.D. Rahn, W.M. Kier, and I.D. Walker. Soft robotics: Biological inspiration, state of the art, and future research. Applied Bionics and Biomechanics, 5(3):99–117, 2008. doi: 10.1080/11762320802557865.
[2] G. Robinson and J.B.C. Davies. Continuum robots – a state of the art. In Proceedings 1999 IEEE International Conference on Robotics and Automation, volume 4, pages 2849–2854, 1999. doi: 10.1109/ROBOT.1999.774029.
[3] I.D. Walker. Continuous backbone “continuum” robot manipulators. International Scholarly Research Notices, 2013:726506, 2013. doi: 10.5402/2013/726506.
[4] H.-S. Yoon and B.-J. Yi. Development of a 4-DOF continuum robot using a spring backbone. The Journal of Korea Robotics Society, 3(4):323–330, 2008.
[5] M. Li, R. Kang, S. Geng, and E. Guglielmino. Design and control of a tendon-driven continuum robot. Transactions of the Institute of Measurement and Control, 40(11):3263–3272, 2018. doi: 10.1177/0142331216685607.
[6] G. Gao, H. Wang, J. Fan, Q. Xia, L. Li, and H. Ren. Study on stretch-retractable single-section continuum manipulator. Advanced Robotics, 33(1):1–12, 2019. doi: 10.1080/01691864.2018.1554507.
[7] C. Laschi, B. Mazzolai, V. Mattoli, M. Cianchetti, and P. Dario. Design of a biomimetic robotic octopus arm. Bioinspiration & Biomimetics, 4(1):15006, 2009. doi: 10.1088/1748- 3182/4/1/015006.
[8] F. Renda, M. Cianchetti, M. Giorelli, A. Arienti, and C. Laschi. A 3D steady-state model of a tendon-driven continuum soft manipulator inspired by the octopus arm. Bioinspiration & Biomimetics, 7(2):25006, 2012. doi: 10.1088/1748-3182/7/2/025006.
[9] F. Renda, M. Giorelli, M. Calisti, M. Cianchetti, and C. Laschi. Dynamic model of a multibending soft robot arm driven by cables. IEEE Transactions on Robotics, 30(5):1109–1122, 2014. doi: 10.1109/TRO.2014.2325992.
[10] Y. Peng, Y. Liu, Y. Yang, N. Liu, Y. Sun, Y. Liu, H. Pu, S. Xie, and J. Luo. Development of continuum manipulator actuated by thin McKibben pneumatic artificial muscle. Mechatronics, 60:56–65, 2019. doi: 10.1016/j.mechatronics.2019.05.001.
[11] G. Gao, H. Ren, Q. Xia, H. Wang, and L. Li. Stretched backboneless continuum manipulator driven by cannula tendons. Industrial Robot, 45(2):237–243, 2018. doi: 10.1108/IR-06-2017-0124.
[12] R.J. Webster III and B.A. Jones. Design and kinematic modeling of constant curvature continuum robots: A review. The International Journal of Robotics Research, 29(13):1661–1683, 2010. doi: 10.1177/0278364910368147.
[13] S. Mosqueda, Y. Moncada, C. Murrugarra, and H. León-Rodriguez. Constant curvature kinematic model analysis and experimental validation for tendon driven continuum manipulators. In Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics ICINCO (2), volume 2, pages 211–218, 2018. doi: 10.5220/0006913502110218.
[14] A. Ghoul, K. Kara, M. Benrabah, and M.L. Hadjili. Optimized nonlinear sliding mode control of a continuum robot manipulator. Journal of Control, Automation and Electrical Systems, pages 1–9, 2022. doi: 10.1007/s40313-022-00914-1.
[15] C. Escande. Towards Modeling of a Class of Bionic Manipulator Robots. PhD Thesis, Lille, France, 2013.
[16] T. Mahl, A. Hildebrandt, and O. Sawodny. A variable curvature continuum kinematics for kinematic control of the bionic handling assistant. IEEE Transactions on Robotics, 30(4):935– 949, 2014. doi: 10.1109/TRO.2014.2314777.
[17] S. Djeffal, A. Amouri, and C. Mahfoudi. Kinematics modeling and simulation analysis of variable curvature kinematics continuum robots. UPB Scientific Bulletin, Series D: Mechanical Engineering, 83:28–42, 2021.
[18] S. Djeffal, C. Mahfoudi, and A. Amouri. Comparison of three meta-heuristic algorithms for solving inverse kinematics problems of variable curvature continuum robots. In 2021 European Conference on Mobile Robots (ECMR), pages 1–6, 2021. doi: 10.1109/ECMR50962.2021.9568789.
[19] O. Lakhal, A. Melingui, A. Shahabi, C. Escande, and R. Merzouki. Inverse kinematic modeling of a class of continuum bionic handling arm. In 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pages 1337–1342, 2014. doi: 10.1109/AIM.2014.6878268.
[20] D. Trivedi, A. Lotfi, and C.D. Rahn. Geometrically exact dynamic models for soft robotic manipulators. In 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems, pages 1497–1502, 2007. doi: 10.1109/IROS.2007.4399446.
[21] A. Amouri, C. Mahfoudi, A. Zaatri, O. Lakhal, and R. Merzouki. A metaheuristic approach to solve inverse kinematics of continuum manipulators. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 231(5):380– 394, 2017. doi: 10.1177/0959651817700779.
[22] E. Shahabi and C.-H. Kuo. Solving inverse kinematics of a planar dual-backbone continuum robot using neural network. In B. Corves, P. Wenger, and M. Hüsing, editors, EuCoMeS 2018, pages 355–361. Springer, Cham, 2019. doi: 10.1007/978-3-319-98020-1_42.
[23] T.G. Thuruthel, E. Falotico, M. Cianchetti, and C. Laschi. Learning global inverse kinematics solutions for a continuum robot. In V. Parenti-Castelli andW. Schiehlen, editors, ROMANSY 21 - Robot Design, Dynamics and Control, pages 47–54. Springer, Cham, 2016. doi: 10.1007/978-3-319-33714-2_6.
[24] L. Jiajia, D. Fuxin, L. Yibin, L. Yanqiang, Z. Tao, and Z. Gang. A novel inverse kinematics algorithm using the Kepler oval for continuum robots. Applied Mathematical Modelling, 93:206–225, 2021. doi: 10.1016/j.apm.2020.12.014.
[25] D.Y. Kolpashchikov, N.V. Laptev, V.V. Danilov, I.P. Skirnevskiy, R.A. Manakov, and O.M. Gerget. FABRIK-based inverse kinematics for multi-section continuum robots. In 2018 18th International Conference on Mechatronics-Mechatronika (ME), pages 1–8. IEEE, 2018.
[26] R. Köker, C. Öz, T. Çakar, and H. Ekiz. A study of neural network based inverse kinematics solution for a three-joint robot. Robotics and Autonomous Systems, 49(3-4):227–234, 2004. doi: 10.1016/j.robot.2004.09.010.
[27] R.Y. Putra, S. Kautsar, R.Y. Adhitya, M. Syai’in, N. Rinanto, I. Munadhif, S.T. Sarena, J. Endrasmono, and A. Soeprijanto. Neural network implementation for invers kinematic model of arm drawing robot. In 2016 International Symposium on Electronics and Smart Devices (ISESD), pages 153–157, 2016. doi: 10.1109/ISESD.2016.7886710.
[28] N. Bigdeli, K. Afsar, B.I. Lame, and A. Zohrabi. Modeling of a five link biped robot dynamics using neural networks. Journal of Applied Sciences, 8(20):3612–3620, 2008.
[29] Z. Bingul, H.M. Ertunc, and C. Oysu. Comparison of inverse kinematics solutions using neural network for 6r robot manipulator with offset. In 2005 ICSC Congress on Computational Intelligence Methods and Applications, page 5, 2005. doi: 10.1109/CIMA.2005.1662342.
[30] X. Zhang, Y. Liu, D.T. Branson, C. Yang, J. S Dai, and R. Kang. Variable-gain control for continuum robots based on velocity sensitivity. Mechanism and Machine Theory, 168:104618, 2022. doi: 10.1016/j.mechmachtheory.2021.104618.
[31] A. Liegeois. Automatic supervisory control of the configuration and behavior of multibody mechanisms. IEEE Transactions on Systems, Man, and Cybernetics, 7(12):868–871, 1977.

[1] F.C. Bardi and S. Kyriakides. Plastic buckling of circular tubes under axial compression–part I: Experiments. International Journal of Mechanical Sciences, 48(8):830–841, 2006. doi: 10.1016/j.ijmecsci.2006.03.005.
[2] J.M. Alexander. An approximate analysis of the collapse of thin cylindrical shells under axial loading. The Quarterly Journal of Mechanics and Applied Mathematics, 13(1):10–15, 1960. doi: 10.1093/qjmam/13.1.10.
[3] A.A.K. Mohammed, M.N. Alam, and R. Ansari. Quasi-static study of thin aluminium frusta with linearly varying wall-thickness. International Journal of Crashworthiness, 25(5):473–484, 2020. doi: 10.1080/13588265.2019.1613762.
[4] A. Shiravand and M. Asgari. Hybrid metal-composite conical tubes for energy absorption; theoretical development and numerical simulation. Thin-Walled Structures, 145:106442, 2019. doi: 10.1016/j.tws.2019.106442.
[5] P. Sadjad, E.M. Hossein, and E.M. Sobhan. Crashworthiness of double-cell conical tubes with different cross sections subjected to dynamic axial and oblique loads. Journal of Central South University, 25:632–645, 2018. doi: 10.1007/s11771-018-3766-z.
[6] G. Lu , J.L. Yu , J.J. Zhang, and T.X. Yu. Alexander revisited: upper- and lower-bound approaches for axial crushing of a circular tube. International Journal of Mechanical Sciences, 206:106610, 2021. doi: 10.1016/j.ijmecsci.2021.106610.
[7] A. Sadighi, A. Eyvazian, M. Asgari, and A.M. Hamouda. A novel axially half corrugated thin-walled tube for energy absorption under axial loading. Thin-Walled Structures, 145:106418, 2019. doi: 10.1016/j.tws.2019.106418.
[8] M.Y. Abbood, and R.N. Kiter. On the peak quasi-static load of axisymmetric buckling of circular tubes. International Journal of Crashworthiness, 27(2):367–375, 2022. doi: 10.1080/13588265.2020.1807679.
[9] T. Wierzbicki, S.U. Bhat, W. Abramowicz, and D. Brodkin. Alexander revisited–-A two folding elements model of progressive crushing of tubes. International Journal of Solids and Structures, 29(4):3269–3288, 1992. doi: 10.1016/0020-7683(92)90040-Z.
[10] A.A. Singace, H. Elsobky, and T.Y. Reddy. On the eccentricity factor in the progressive crushing of tubes. International Journal of Solids and Structures, 32(24):3589-3602, 1995. doi: 10.1016/0020-7683(95)00020-B.
[11] H.E. Postlethwaite and B. Mills. Use of collapsible structural elements as impact isolators, with special reference to automotive applications. The Journal of Strain Analysis for Engineering Design, 5(1):58–73,1970. doi: 10.1243/03093247V051058.
[12] A.G. Mamalis, D.E. Manolakos, S. Saigal, G. Viegelahn, and W. Johnson. Extensible plastic collapse of thin-wall frusta as energy absorbers. International Journal of Mechanical Sciences, 28(4):219–229, 1986. doi: 10.1016/0020-7403(86)90070-6.
[13] A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn, and W. Johnson. The modeling of the progressive extensible plastic collapse of thin-wall shells. International Journal of Mechanical Sciences, 30(3-4):249–261, 1988. doi: 10.1016/0020-7403(88)90058-6.
[14] N.K. Gupta, G.L. Prasad, and S.K. Gupta. Plastic collapse of metallic conical frusta of large semi-apical angles. International Journal of Crashworthiness, 2(4):349–366, 1997. doi: 10.1533/cras.1997.0054.
[15] A.A.A. Alghamdi, A.A.N. Aljawi, and T.M.N. Abu-Mansour. Modes of axial collapse of unconstrained capped frusta. International Journal of Mechanical Sciences, 44(6):1145–1161, 2002. doi: 10.1016/S0020-7403(02)00018-8.
[16] N.M. Sheriff, N.K. Gupta, R. Velmurugan, and N. Shanmugapriyan. Optimization of thin conical frusta for impact energy absorption. Thin-Walled Structures, 46(6):653–666, 2008. doi: 10.1016/j.tws.2007.12.001.

[1] X. Liu, K. Kim, and Y. Sun. A MEMS stage for 3-axis nanopositioning. Journal of Micromechanics and Microengineering, 17(9):1796–1802, 2007. doi: 10.1088/0960-1317/17/9/007.
[2] R. Legtenberg, A.W. Groeneveld, and M. Elwenspoek. Comb-drive actuators for large displacements. Journal of Micromechanics and Microengineering, 6(3):320–329, 1996. doi: 10.1088/0960-1317/6/3/004.
[3] S. Abe, M.H. Chu, T. Sasaki, and K. Hane. Time response of a microelectromechanical silicon photonic waveguide coupler switch. IEEE Photonics Technology Letters, 26(15):1553–1556, 2014. doi: 10.1109/lpt.2014.2329033.
[4] T.Q. Trinh, L.Q. Nguyen, D.V. Dao, H.M. Chu, and H.N. Vu, Design and analysis of a z-axis tuning fork gyroscope with guided-mechanical coupling. Microsystem Technologies, 20(2):281–289, 2014. doi: 10.1007/s00542-013-1947-0.
[5] Y.J. Huang, T.L. Chang, and H.P. Chou. Novel concept design for complementary metal oxide semiconductor capacitive z-direction accelerometer. Japanese Journal of Applied Physics, 48(7):076508, 2009. doi: 10.1143/jjap.48.076508.
[6] A. Sharaf and S. Sedky. Design and simulation of a high-performance Z-axis SOI-MEMS accelerometer. Microsystem Technologies, 19(8):1153–1163, 2013. doi: 10.1007/s00542-012-1714-7.
[7] Y. Matsumoto, M. Nishimura, M. Matsuura, and M. Ishida. Three-axis SOI capacitive accelerometer with PLL C–V converter. Sensors and Actuators A: Physical, 75(1):77–85, 1999. doi: 10.1016/s0924-4247(98)00295-7.
[8] D. Peroulis, S.P. Pacheco, K. Sarabandi, and L.P.B. Katehi. Electromechanical considerations in developing low-voltage RF MEMS switches. IEEE Transactions on Microwave Theory and Techniques, 51:259–270, 2003. doi: 10.1109/TMTT.2002.806514.
[9] Y. Liu. Stiffness Calculation of the microstructure with crab-leg flexural suspension. Advanced Materials Research, 317-319:1123–1126, 2011. doi: 10.4028/www.scientific.net/AMR.317-319.1123.
[10] H.M. Chou, M.J. Lin, and R. Chen. Investigation of mechanics properties of an awl-shaped serpentine microspring for in-plane displacement with low spring constant-to-layout area. Journal of Micro/Nanolithography MEMS and MOEMS, 15(3):035003, 2016. doi: 10.1117/1.JMM.15.3.035003.
[11] D.V. Hieu, L.V. Tam, N.V. Duong, N.D. Vy, and C.M. Hoang. Design and simulation analysis of a z axis microactuator with low mode cross-talk. Journal of Mechanics, 36(6):881–888, 2020. doi: 10.1017/jmech.2020.48.
[12] D.V. Hieu, L.V. Tam, K. Hane, and M.H. Chu. Design and simulation analysis of an integrated XYZ micro-stage for controlling displacement of scanning probe. Journal of Theoretical and Applied Mechanics, 59(1):143–156, 2021. doi: 10.15632/jtam-pl/130549.
[13] F. Hu, W. Wang, and J. Yao. An electrostatic MEMS spring actuator with large stroke and out-of-plane actuation. Micromechanics and Microengineering, 21(11):115029, 2011. doi: 10.1088/0960-1317/21/11/115029.
[14] W. Wai-Chi, A.A. Azid, and B.Y. Majlis. Formulation of stiffness constant and effective mass for a folded beam. Archives of Mechanics, 62(5):405–418, 2010.
[15] Y. Cao and Z. Xi. A review of MEMS inertial switches. Microsystem Technologies, 25(12):4405–4425, 2019. doi: 10.1007/s00542-019-04393-4.
[16] K.R. Sudha, K. Uttara, P.C. Roshan, and G.K. Vikas. Design and analysis of serpentine based MEMS accelerometer. AIP Conference Proceedings, 1966:020026, 2018. doi: 10.1063/1.5038705.
[17] H.M. Chou, M.J. Lin, and R. Chen. Fabrication and analysis of awlshaped serpentine microsprings for large out-of-plane displacement. Journal of Micromechanics and Microengineering, 25:095018, 2015. doi: 10.1088/0960-1317/25/9/095018.
[18] C.M. Hoang, and K. Hane. Design fabrication and vacuum operation characteristics of two-dimensional comb-drive micro-scanner. Sensors and Actuators A: Physical, 165(2): 422–430, 2011. doi: 10.1016/j.sna.2010.11.004.
[19] G. Barillaro, A. Molfese, A. Nannini, and F. Pieri. Analysis simulation and relative performances of two kinds of serpentine springs. Journal of Micromechanics and Microengineering, 15(4):736–746, 2005. doi: 10.1088/0960-1317/15/4/010.
[20] P.B. Chu, I. Brener, C. Pu, S.S. Lee, J.I. Dadap, S. Park, K.Bergman et al. Design and nonlinear servo control of MEMS mirrors and their performance in a large port-count optical switch. Journal of Microelectromechanical Systems, 14(2):261–273, 2005. doi: 10.1109/JMEMS.2004.839827.
[21] G.D.J. Su, S.H. Hung, D. Jia, and F. Jiang. Serpentine Spring corner designs for micro-electro-mechanical systems optical switches with large mirror mass. Optical Review, 12(4):339–344, 2005. doi: 10.1007/s10043-005-0339-9.
[22] A. Khlifi, A. Ahmed, S. Pandit, B. Mezghani, R. Patkar, P. Dixit, and M.S. Baghini. Experimental and theoretical dynamic investigation of MEMS Polymer mass-spring systems. IEEE Sensors Journal, 20(19):11191–11203, 2020. doi: 10.1109/JSEN.2020.2996802.
[23] J. Wu, T. Liu, K. Wang, and K. Sørby. A measuring method for micro force based on MEMS planar torsional spring. Measurement Science and Technology, 32(3):035002, 2020. doi: 10.1088/1361-6501/ab9acd.
[24] Z. Rahimi, J. Yazdani, H. Hatami, W. Sumelka, D. Baleanu, and S. Najafi. Determination of hazardous metal ions in the water with resonant MEMS biosensor frequency shift – concept and preliminary theoretical analysis. Bulletin of the Polish Academy of Sciences: Technical Sciences, 68(3): 529–537, 2020. doi: 10.24425/bpasts.2020.133381.
[25] K.G. Sravani, D. Prathyusha, C. Gopichand, S.M. Maturi, A. Elsinawi, K. Guha, and K. S. Rao. Design, simulation and analysis of RF MEMS capacitive shunt switches with high isolation and low pull-in-voltage. Microsystem Technologies, 28:913–928, 2022. doi: 10.1007/s00542-020-05021-2.
[26] N. Lobontiu and E. Garcia. Mechanics of Microelectromechanical Systems. Kluwer Academic Publishers, 2005. doi: 10.1007/b100026.
[27] H.A. Rouabah, C.O. Gollasch, and M. Kraft. Design optimisation of an electrostatic MEMS actuator with low spring constant for an “Atom Chip”. In Technical Proceedings of the 2005 NSTI Nanotechnology Conference and Trade Show, volume 3, pages 489–492, 2002.
[28] R. Raymond and J. Raymond. Roark's Formulas for Stress and Strain. McGraw-Hill, 1989.
[29] M.S. Weinberg and A. Kourepenis. Error sources in in-plane silicon tuning-fork MEMS gyroscopes. Journal of Microelectromechanical Systems, 15(3):479–491, 2006. doi: 10.1109/jmems.2006.876779.

[1] G. Chrysslouris, M. Wollowitz, and N.P. Sun. Electrochemical hole making. Annals CIRP, 33(1):99–104, 1984. doi: 10.1016/S0007-8506(07)61388-2.
[2] M. Datta and L.T. Romankiw. Application of chemical and electrochemical micromachining in the electronics industry. Journal of Electrochemical Society, 136(6):285–292, 1989. doi: 10.1149/1.2097055.
[3] A. Ruszaj. Electrochemical machining – state of the art and direction of development. Mechanik, 90(12):1102–1109, 2017. doi: 10.17814/mechanik.2017.12.188.
[4] A. Ruszaj, J. Gawlik, and S. Skoczypiec. Electrochemical machining – special equipment and applications in aircraft industry. Management and Production Engineering Review, 7(2):34–41, 2016. doi: 10.1515/mper-2016-0015.
[5] K.P. Rajurkar, M.M. Sundaram,and A.P. Malshe. Review of electrochemical and electro discharge machining. Procedia CIRP, 6:13–26, 2013. doi: 10.1016/j.procir.2013.03.002.
[6] J. Bannard. Electrochemical machining. Journal of Applied Electrochemistry, 7:1–29, 1977. doi: 10.1007/BF00615526.
[7] J.A. McGeough. Principles of Electrochemical Machining. Chapman and Hall, London, 1974.
[8] J.A. McGeough and H. Rasmussen. Theoretical analysis of the electroforming process. Journal Mechanical Engineering Science, 23(3):113–120, 1981. doi: 10.1243/JMES_JOUR_1981_023_024_02.
[9] H.S.J. Altena. Precision ECM by process characteristic modelling. Ph.D. Thesis, Glasgow Caledonian University. 2000.
[10] A. Budzyński and S. Seroka. Studies of unidirectional longitudinal electrochemical honing. Conference Materials EM-82, Bydgoszcz, Poland, pages 152–161, 1982. (in Polish).
[11] L. Dąbrowski. Basics of Computer Simulation of Electrochemical Forming. Scientific Works, Mechanics 154, Publisher of Warsaw University of Technology. 1992. (in Polish).
[12] J. Kozak and M. Zybura-Skrabalak. Some problems of surface roughness in electrochemical machining Procedia CIRP, 42:101–106, 2016. doi: 10.1016/j.procir.2016.02.198.
[13] K. Łubkowski, L. Dąbrowski, J. Kozak, and M. Rozenek. Electrochemical machine tools for surface smoothing and deburring. Conference Materials EM-90, Bydgoszcz, Poland, pages 78-86, 1990. (in Polish).
[14] X. Wang, H. Li, and S. Niu. Simulation and experimental research into combined electrochemical milling and electrochemical grinding machining of Ti40 titanium alloy. International Journal Electrochemical Science, 15:11150–11167, 2020. doi: 10.20964/2020.11.09.
[15] M. Singh and S. Singh. Electrochemical discharge machining: A review on preceding and perspective research. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233(5):1425–1449, 2019. doi: 10.1177/0954405418798865.
[16] J.F. Wilson. Practice and Theory of Electrochemical Machining. Wiley, New York, 1971.
[17] J. Kozak. Mathematical models for computer simulation of electrochemical machining processes. Journal of Materials Processing Technology, 76(1-3):170-175, 1998. doi: 10.1016/S0924-0136(97)00333-6.
[18] J. Sawicki. ECM machining of curvilinear rotary surfaces by a shaping tool electrode performing composite motion. Advances in Manufacturing Science and Technology, 34(2):79–92, 2010.
[19] A.D. Davydov, V.M. Volgin, and V.V. Lyubimov. Electrochemical machining of metals: fundamentals of electrochemical shaping. Russian Journal of Electrochemistry, 40(12):1230–1265, 2004. doi: 10.1007/s11175-005-0002-6.
[20] J. Sawicki and T. Paczkowski. Effect of the hydrodynamic conditions of electrolyte flow on critical states in electrochemical machining. EPJ Web of Conferences, 92:02078, 2015. doi: 10.1051/epjconf/20159202078.
[21] C.F. Noble. Studies in Electrochemical Machining. PhD Thesis. University of Manchester, UK, 1976.
[22] H. Demitras, O. Yilmaz, and B. Kanber. Controlling short circuiting, oxide layer and cavitation problems in electrochemical machining of freeform surfaces. Journal of Materials Processing Technology, 262:585–596, 2018. doi: 10.1016/j.jmatprotec.2018.07.029.
[23] T. Paczkowski and J. Sawicki. Electrochemical machining of curvilinear surfaces. Machining Science and Technology, 12(1):33–52, 2008. doi: 10.1080/10910340701881433.
[24] T. Paczkowski and J. Zdrojewski. The mechanism of ECM technology design for curvilinear surfaces. Procedia CIRP, 42:356–361, 2016. doi: 10.1016/j.procir.2016.02.195.
[25] J. Sawicki. ECM machining of curvilinear rotary surfaces. Journal of Polish CIMAC. 5(3):88–98, 2010.
[26] J. Sawicki. Analysis and Modeling of Electrochemical Machining of Curvilinear Rotary Surfaces. University Publisher. UTP University of Science and Technology, Poznan, Poland, 2013.
[27] E.I. Filatov. The numerical simulation of the unsteady ECM process. Journal of Materials Processing Technology, 109(3):327–332, 2001. doi: 10.1016/S0924-0136(00)00817-7.
[28] C. Zhang, Z. Xu, Y. Hang, and J. Xing. Effect of solution conductivity on tool electrode wear in electrochemical discharge drilling of nickel-based alloy. The International Journal of Advanced Manufacturing Technology, 103:743–756, 2019. doi: 10.1007/s00170-019-03492-w.
[29] M. Chai, Z. Li, X. Song, J. Ren, and Q. Cui. Optimization and simulation of electrochemical machining of cooling holes on high temperature nickel-based alloy. International Journal Electrochemical Science, 16:210912, 2021. doi: 10.20964/2021.09.35.
[30] D. Mi and W. Natsu. Proposal of ECM method for holes with complex internal features by controlling conductive area ratio along tool electrode. Precision Engineering, 42:179–186, 2015. doi: 10.1016/j.precisioneng.2015.04.015.
[31] D. Zhu, R. Zhang, and C. Liu. Flow field improvement by optimizing turning profile at electrolyte inlet in electrochemical machining. International Journal of Precision Engineering and Manufacturing, 18(1):15–22, 2017. doi: 10.1007/s12541-017-0002-y.
[32] J. Kozak. Surface Shaping Contactless Electrochemical Machining. Scientific Works, Mechanics 41, Publisher of Warsaw University of Technology. 1976. (in Polish).
[33] Łubkowski K. Critical States in Electrochemical Machining. Scientific Works, Mechanics 163, Publisher of Warsaw University of Technology, 1996. (in Polish).

[1] J.-M. Bian and B.-T. Wang. Study on shear strength of unsaturated soils based on the saturated soils. In 2011 International Conference on Electric Technology and Civil Engineering (ICETCE), pages 2656–2659, 2011. doi: 10.1109/ICETCE.2011.5775686.
[2] J. Jin. Research of soil compactness tested by instant vibration method. In 2011 International Conference on Electric Technology and Civil Engineering (ICETCE), pages 585–588, 2011. doi: 10.1109/ICETCE.2011.5774579.
[3] J. Wu, G. Yang, X. Wang, and W. Li. PZT-based soil compactness measuring sheet using electromechanical impedance. IEEE Sensors Journal, 20(17):10240–10250, 2020. doi: 10.1109/JSEN.2020.2991580.
[4] X. Wang, X. Dong, Z. Zhang, J. Zhang, G. Ma, and X. Yang. Compaction quality evaluation of subgrade based on soil characteristics assessment using machine learning. Transportation Geotechnics, 32:100703, 2022. doi: 10.1016/j.trgeo.2021.100703.
[5] Z. Gao and J. Chai. Method for predicting unsaturated permeability using basic soil properties. Transportation Geotechnics, 34:100754, 2022. doi: 10.1016/j.trgeo.2022.100754.
[6] C.E. Choong, K T.Wong, S.B. Jang, J.-Y. Song, S.-G. An, C.-W. Kang, Y. Yoon, and M. Jang. Soil permeability enhancement using pneumatic fracturing coupled by vacuum extraction for in-situ remediation: Pilot-scale tests with an artificial neural network model. Journal of Environmental Chemical Engineering, 10(1):107075, 2022. doi: 10.1016/j.jece.2021.107075.
[7] L. Pohl, A. Kölbl, D. Uteau, S. Peth, W. Häusler, L. Mosley, P. Marschner, R. Fitzpatrick, and I. Kögel-Knabner. Porosity and organic matter distribution in jarositic phyto tubules of sulfuric soils assessed by combined μCT and NanoSIMS analysis. Geoderma, 399:115124, 2021. doi: 10.1016/j.geoderma.2021.115124.
[8] W. Zhang, R. Bai, X. Xu, and W. Liu. An evaluation of soil thermal conductivity models based on the porosity and degree of saturation and a proposal of a new improved model. International Communications in Heat and Mass Transfer, 129:105738, 2021. doi: 10.1016/j.icheatmasstransfer.2021.105738.
[9] F.R.A. Ziegler-Rivera, B. Prado, A. Gastelum-Strozzi, J. Márquez, L. Mora, A. Robles, and B. González. Computed tomography assessment of soil and sediment porosity modifications from exposure to an acid copper sulfate solution. Journal of South American Earth Sciences, 108:103194, 2021. doi: 10.1016/j.jsames.2021.103194.
[10] B.C. Ball. Pore characteristics of soils from two cultivation experiments as shown by gas diffusivities and permeabilities and air-filled porosities. European Journal of Soil Science, 32(4):483–498, 1981. doi: 10.1111/j.1365-2389.1981.tb01724.x.
[11] S. Deviren Saygin, F. Arı, Ç. Temiz, S. Arslan, M.A. Ünal, and G. Erpul. Analysis of soil cohesion by fluidized bed methodology using integrable differential pressure sensors for a wide range of soil textures. Computers and Electronics in Agriculture, 191:106525, 2021. doi: 10.1016/j.compag.2021.106525.
[12] Y. Kim, A. Satyanaga, H. Rahardjo, H. Park, and A.W.L. Sham. Estimation of effective cohesion using artificial neural networks based on index soil properties: A Singapore case. Engineering Geology, 289:106163, 2021. doi: 10.1016/j.enggeo.2021.106163.
[13] V. Marzulli, C.S. Sandeep, K. Senetakis, F. Cafaro, and T. Pöschel. Scale and water effects on the friction angles of two granular soils with different roughness. Powder Technology, 377:813–826, 2021. doi: 10.1016/j.powtec.2020.09.060.
[14] J. Zou, G. Chen, and Z. Qian. Tunnel face stability in cohesion-frictional soils considering the soil arching effect by improved failure models. Computers and Geotechnics, 106:1–17, 2019. doi: 10.1016/j.compgeo.2018.10.014.
[15] A. Kaya. Relating equal smectite content and basal spacing to the residual friction angle of soils. Engineering Geology, 108(3):252–258, 2009. doi: 10.1016/j.enggeo.2009.06.013.
[16] Y. Wang and O.V. Akeju. Quantifying the cross-correlation between effective cohesion and friction angle of soil from limited site-specific data. Soils and Foundations, 56(6):1055–1070, 2016. doi: 10.1016/j.sandf.2016.11.009.
[17] E. Stockton, B.A. Leshchinsky, M.J. Olsen, and T.M. Evans. Influence of both anisotropic friction and cohesion on the formation of tension cracks and stability of slopes. Engineering Geology, 249:31–44, 2019. doi: 10.1016/j.enggeo.2018.12.016.
[18] J. Ye. 3D liquefaction criteria for seabed considering the cohesion and friction of soil. Applied Ocean Research, 37:111–119, 2012. doi: 10.1016/j.apor.2012.04.004.
[19] M. Ohno and K. Fukai. Pavement construction work of a road surface by soil cement concrete that used construction remainder soil. In Proceedings First International Symposium on Environmentally Conscious Design and Inverse Manufacturing, pages 638–641, 1999. doi: 10.1109/ECODIM.1999.747690.
[20] J. Ling,Y.Yang, Z. Ma, and G.Yang. Engineering properties and treatment of hydraulically reclaimed saline soil in coastal area. In 2014 Sixth International Conference on Measuring Technology and Mechatronics Automation, pages 275–278, 2014. doi: 10.1109/ICMTMA.2014.69.
[21] P.P. Kulkarni and J.N. Mandal. Strength evaluation of soil stabilized with nano silica- cement mixes as road construction material. Construction and Building Materials, 314:125363, 2022. doi: 10.1016/j.conbuildmat.2021.125363.
[22] T. Zhang, S. Liu, H. Zhan, C. Ma, and G. Cai. Durability of silty soil stabilized with recycled lignin for sustainable engineering materials. Journal of Cleaner Production, 248:119293, 2020. doi: 10.1016/j.jclepro.2019.119293.
[23] R.W. Day. Soil Testing Manual: Procedures, Classification Data, and Sampling Practices. McGraw Hill Inc., New York, U.S., 2001.
[24] T. Davis. Geotechnical Testing, Observation, and Documentation. American Society of Civil Engineers, Reston, Virginia, U.S., 2 edition, 2008.
[25] D. Hillel. Fundamentals of Soil Physics. Academic Press, New York, U.S., 1 edition, 1980.
[26] L.A.P. Barbosa, K.M. Gerke, and H.H. Gerke. Modelling of soil mechanical stability and hydraulic permeability of the interface between coated biopore and matrix pore regions. Geoderma, 410:115673, 2022. doi: 10.1016/j.geoderma.2021.115673.
[27] I.I. Obianyo, E.N. Anosike-Francis, G.O. Ihekweme, Y. Geng, R. Jin, A.P. Onwualu, and A.B. O. Soboyejo. Multivariate regression models for predicting the compressive strength of bone ash stabilized lateritic soil for sustainable building. Construction and Building Materials, 263:120677, 2020. doi: 10.1016/j.conbuildmat.2020.120677.
[28] L. Bakaiyang, J. Madjadoumbaye, Y. Boussafir, F. Szymkiewicz, and M. Duc. Re-use in road construction of a Karal-type clay-rich soil from North Cameroon after a lime/cement mixed treatment using two different limes. Case Studies in Construction Materials, 15:e00626, 2021. doi: 10.1016/j.cscm.2021.e00626.
[29] Z. Han, S.K. Vanapalli, J-P. Ren, and W-L. Zou. Characterizing cyclic and static moduli and strength of compacted pavement subgrade soils considering moisture variation. Soils and Foundations, 58(5):1187–1199, 2018. doi: 10.1016/j.sandf.2018.06.003.
[30] I. Kamal and Y. Bas. Materials and technologies in road pavements - an overview. Materials Today: Proceedings; 3rd International Conference on Materials Engineering & Science, 42:2660–2667, 2021. doi: 10.1016/j.matpr.2020.12.643.
[31] R. Jauberthie, F. Rendell, D. Rangeard, and L. Molez. Stabilisation of estuarine silt with lime and/or cement. Applied Clay Science, 50(3):395–400, 2010. doi: 10.1016/j.clay.2010.09.004.
[32] P. Lindh and P. Lemenkova. Resonant frequency ultrasonic P-waves for evaluating uniaxial compressive strength of the stabilized slag–cement sediments. Nordic Concrete Research, 65:39–62, 2021. doi: 10.2478/ncr-2021-0012">10.2478/ncr-2021-0012">10.2478/ncr-2021-0012.
[33] M. Arabi and S. Wild. Property changes induced in clay soils when using lime stabilization. Municipal Engineer, 6:85–99, 1989.
[34] P. Lindh. Compaction- and strength properties of stabilised and unstabilised fine-grained tills. PhD thesis, Lund University, Lund, Sweden, 2004.
[35] C. Liu and R.D. Starcher. Effects of curing conditions on unconfined compressive strength of cement- and cement-fiber-improved soft soils. Journal of Materials in Civil Engineering, 25(8):1134–1141, 2013. doi: 10.1061/(ASCE)MT.1943-5533.0000575.
[36] P.J. Venda Oliveira, A.A.S. Correia, and M.R. Garcia. Effect of organic matter content and curing conditions on the creep behavior of an artificially stabilized soil. Journal of Materials in Civil Engineering, 24(7):868–875, 2012. doi: 10.1061/(ASCE)MT.1943-5533.0000454.
[37] H. Ghasemzadeh, A. Mehrpajouh, M. Pishvaei, and M. Mirzababaei. Effects of curing method and glass transition temperature on the unconfined compressive strength of acrylic liquid polymer-stabilized kaolinite. Journal of Materials in Civil Engineering, 32 (8):04020212, 2020. doi: 10.1061/(ASCE)MT.1943-5533.0003287.
[38] A. Aldaood, M. Bouasker, and M. Al-Mukhtar. Effect of the temperature and curing time on the water transfer of lime stabilized gypseous soil. In Poromechanics V: Proceedings of the Fifth Biot Conference on Poromechanics, pages 2325–2333, 2013. doi: 10.1061/9780784412992.272.
[39] H. Yu, J. Yin, A. Soleimanbeigi, and W.J. Likos. Effects of curing time and fly ash content on properties of stabilized dredged material. Journal of Materials in Civil Engineering, 29(10):04017199, 2017. doi: 10.1061/(ASCE)MT.1943-5533.0002032.
[40] W.-S. Oh and Ta-H. Kim. Dependence of the material properties of lightweight cemented soil on the curing temperature. Journal of Materials in Civil Engineering, 26(7):06014008, 2014. doi: 10.1061/ (ASCE)MT.1943-5533.0000940.
[41] I.L. Howard and B.K. Anderson. Time-dependent properties of very high moisture content fine grained soils stabilized with portland and slag cement. In Geotechnical Frontiers 2017, pages 891–899, 2017. doi: 10.1061/9780784480472.095.
[42] N.C. Consoli, R.C. Cruz, and M.F. Floss. Variables controlling strength of artificially cemented sand: Influence of curing time. Journal of Materials in Civil Engineering, 23(5):692–696, 2011. doi: 10.1061/(ASCE)MT.1943-5533.0000205.
[43] A.T.M.Z. Rabbi and J.Kuwano. Effect of curing time and confining pressure on the mechanical properties of cement-treated sand. In GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering, pages 996–1005, 2012. doi: 10.1061/9780784412121.103.
[44] S. Chaiyaput, N. Arwaedo, N. Kingnoi, T. Nghia-Nguyen, and J. Ayawanna. Effect of curing conditions on the strength of soil cement. Case Studies in Construction Materials, 16:e01082, 2022. doi: 10.1016/j.cscm.2022.e01082.
[45] P. Lindh and P. Lemenkova. Geochemical tests to study the effects of cement ratio on potassium and TBT leaching and the pH of the marine sediments from the Kattegat Strait, Port of Gothenburg, Sweden. Baltica, 35(1):47–59, 2022. doi: 10.5200/baltica.2022.1.4.
[46] A.A. Amadi and A.S. Osu. Effect of curing time on strength development in black cotton soil – quarry fines composite stabilized with cement kiln dust (CKD). Journal of King Saud University - Engineering Sciences, 30(4):305–312, 2018. doi: 10.1016/j.jksues.2016.04.001.
[47] D.Wang, R. Zentar, and N.E. Abriak. Temperature-accelerated strength development in stabilized marine soils as road construction materials. Journal of Materials in Civil Engineering, 29(5):04016281, 2017. doi: 10.1061/(ASCE)MT.1943-5533.0001778.
[48] B. Rekik, M. Boutouil, and A. Pantet. Geotechnical properties of cement treated sediment: influence of the organic matter and cement contents. International Journal of Geotechnical Engineering, 3(2):205–214, 2009. doi: 10.3328/IJGE.2009.03.02.205-214.
[49] E.O. Tastan, T.B. Edil, C.H. Benson, and A.H. Aydilek. Stabilization of organic soils with fly ash. Journal of Geotechnical and Geoenvironmental Engineering, 137(9):819–833, 2011. doi: 10.1061/ (ASCE)GT.1943-5606.0000502.
[50] H. Hasan, H. Khabbaz, and B. Fatahi. Impact of quicklime and fly ash on the geotechnical properties of expansive clay. In Geo-China 2016: Advances in Pavement Engineering and Ground Improvement, pages 93–100, 2016. doi: 10.1061/9780784480014.012.
[51] P. Solanki, N. Khoury, and M. Zaman. Engineering behavior and microstructure of soil stabilized with cement kiln dust. In Geo-Denver 2007: Soil Improvement, pages 1–10, 2007. doi: 10.1061/40916(235)6.
[52] P. Lindh and P. Lemenkova. Evaluation of different binder combinations of cement, slag and CKD for s/s treatment of TBT contaminated sediments. Acta Mechanica et Automatica, 15(4):236–248, 2021. doi: 10.2478/ama-2021-0030.
[53] A. Arulrajah, A. Mohammadinia, A. D’Amico, and S. Horpibulsuk. Effect of lime kiln dust as an alternative binder in the stabilization of construction and demolition materials. Construction and Building Materials, 152:999–1007, 2017. doi: 10.1016/j.conbuildmat.2017.07.070.
[54] X. Bian, L. Zeng, X. Li, X. Shi, S. Zhou, and F. Li. Fabric changes induced by super-absorbent polymer on cement–lime stabilized excavated clayey soil. Journal of Rock Mechanics and Geotechnical Engineering, 13(5):1124–1135, 2021. doi: 10.1016/j.jrmge.2021.03.006.
[55] S. Andavan and V.K. Pagadala. A study on soil stabilization by addition of fly ash and lime. Materials Today: Proceedings; International Conference on Materials Engineering and Characterization 2019, 22:1125–1129, 2020. doi: 10.1016/j.matpr.2019.11.323.
[56] P. Indiramma, Ch. Sudharani, and S. Needhidasan. Utilization of fly ash and lime to stabilize the expansive soil and to sustain pollution free environment – an experimental study. Materials Today: Proceedings; International Conference on Materials Engineering and Characterization 2019, 22:694–700, 2020. doi: 10.1016/j.matpr.2019.09.147.
[57] C.A. Mozejko and F.M. Francisca. Enhanced mechanical behavior of compacted clayey silts stabilized by reusing steel slag. Construction and Building Materials, 239:117901, 2020. doi: 10.1016/j.conbuildmat.2019.117901.
[58] M.P. Durante Ingunza, K.L. de Araújo Pereira, and O F. dos Santos Junior. Use of sludge ash as a stabilizing additive in soil-cement mixtures for use in road pavements. Journal of Materials in Civil Engineering, 27(7):06014027, 2015. doi: 10.1061/(ASCE)MT.1943-5533.0001168.
[59] M.M. Al-Sharif and M.F. Attom. The use of burned sludge as a new soil stabilizing agent. In National Conference Environmental and Pipeline Engineering 2000, pages 378–388, 2000. doi: 10.1061/40507(282)42.
[60] P. Lindh. Optimizing binder blends for shallow stabilisation of fine-grained soils. Proceedings of the Institution of Civil Engineers - Ground Improvement, 5(1):23–34, 2001. doi: 10.1680/grim.2001.5.1.23.
[61] A. Ahmed. Compressive strength and microstructure of soft clay soil stabilized with recycled bassanite. Applied Clay Science, 104:27–35, 2015. doi: 10.1016/j.clay.2014.11.031.
[62] P. Lindh and M.G. Winter. Sample preparation effects on the compaction properties of Swedish fine-grained tills. Quarterly Journal of Engineering Geology and Hydrogeology, 36(4):321–330, 2003. doi: 10.1144/1470-9236/03-018.
[63] P. Xu, Q. Zhang, H. Qian, M. Li, and F. Yang. An investigation into the relationship between saturated permeability and microstructure of remolded loess: A case study from Chinese Loess Plateau. Geoderma, 382:114774, 2021. doi: 10.1016/j.geoderma.2020.114774.
[64] A. Anagnostopoulos, G. Koukis, N. Sabatakakis, and G. Tsiambaos. Empirical correlations of soil parameters based on Cone Penetration Tests (CPT) for Greek soils. Geotechnical and Geological Engineering, 21:377–387, 2003. doi: 10.1023/B:GEGE.0000006064.47819.1a.
[65] H. Källén, A. Heyden, K. Åström, and P. Lindh. Measuring and evaluating bitumen coverage of stones using two different digital image analysis methods. Measurement, 84:56–67, 2016. doi: 10.1016/j.measurement.2016.02.007.
[66] V. Lemenkov and P. Lemenkova. Measuring equivalent cohesion Ceq of the frozen soils by compression strength using kriolab equipment. Civil and Environmental Engineering Reports, 31(2):63–84, 2021. doi: 10.2478/ceer-2021-0020.
[67] X. Huang, R. Horn, and T. Ren. Soil structure effects on deformation, pore water pressure, and consequences for air permeability during compaction and subsequent shearing. Geoderma, 406:115452, 2022. doi: 10.1016/j.geoderma.2021.115452.
[68] W. Kongkitkul, T. Saisawang, P. Thitithavoranan, P. Kaewluan, and T. Posribink. Correlations between the surface stiffness evaluated by light-weight deflectometer and degree of compaction. In Geo-Shanghai 2014: Tunneling and Underground Construction, pages 65–75, 2014. doi: 10.1061/9780784413449.007.
[69] K. Lee, M. Prezzi, and N. Kim. Subgrade design parameters from samples prepared with different compaction methods. Journal of Transportation Engineering, 133(2):82–89, 2007. doi: 10.1061/ (ASCE)0733-947X(2007)133:2(82).
[70] M. Bryk. Resolving compactness index of pores and solid phase elements in sandy and silt loamy soils. Geoderma, 318:109–122, 2018. doi: 10.1016/j.geoderma.2017.12.030.
[71] W. l. Zou, Z. Han, S.K. Vanapalli, J.-F. Zhang, and G.-T. Zhao. Predicting volumetric behavior of compacted clays during compression. Applied Clay Science, 156:116–125, 2018. doi: 10.1016/j.clay.2018.01.036.
[72] S.J.Wasman, M.C. McVay, K. Beriswill, D. Bloomquist, J. Shoucair, and D. Horhota. Study of laboratory compaction system variance using an Automatic Proctor Calibration Device. Journal of Materials in Civil Engineering, 25(4):429–437, 2013. doi: 10.1061/(ASCE)MT.1943- 5533.0000599.
[73] L. Di Matteo, F. Bigotti, and R. Ricco. Best-fit models to estimate modified Proctor properties of compacted soil. Journal of Geotechnical and Geoenvironmental Engineering, 135(7):992– 996, 2009. doi: 10.1061/(ASCE)GT.1943-5606.0000022.
[74] O. Boudlal and B. Melbouci. Study of the behavior of aggregates demolition by the Proctor and CBR tests. In GeoHunan International Conference 2009: Material Design, Construction, Maintenance, and Testing of Pavements, pages 75–80, 2009. doi: 10.1061/41045(352)12.
[75] L. Barden and G.R. Sides. Engineering behavior and structure of compacted clay. Journal of the Soil Mechanics and Foundations Division, 96(4):1171–1200, 1970. doi: 10.1061/JSFEAQ.0001434.
[76] M. Jibon and D. Mishra. Light weight deflectometer testing in Proctor molds to establish resilient modulus properties of fine-grained soils. Journal of Materials in Civil Engineering, 33(2):06020025, 2021. doi: 10.1061/(ASCE)MT.1943-5533.0003582.
[77] A. Aragón, M.G. García, R.R. Filgueira, and Ya.A. Pachepsky. Maximum compactibility of Argentine soils from the Proctor test: The relationship with organic carbon and water content. Soil and Tillage Research, 56(3):197–204, 2000. doi: 10.1016/S0167-1987(00)00144-6.
[78] H. Bayat, S. Asghari, M. Rastgou, and G.R. Sheykhzadeh. Estimating Proctor parameters in agricultural soils in the Ardabil plain of Iran using support vector machines, artificial neural networks and regression methods. CATENA, 189:104467, 2020. doi: 10.1016/j.catena.2020.104467.
[79] A.B.J.C. Nhantumbo and A.H. Cambule. Bulk density by Proctor test as a function of texture for agricultural soils in Maputo province of Mozambique. Soil and Tillage Research, 87(2):231–239, 2006. doi: 10.1016/j.still.2005.04.001.
[80] A. Alaoui, J. Lipiec, and H.H. Gerke. A review of the changes in the soil pore system due to soil deformation: A hydrodynamic perspective. Soil and Tillage Research, 115-116:1–15, 2011. doi: 10.1016/j.still.2011.06.002.
[81] ASTM Standard D698. Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort. ASTM International, West Conshohocken, PA, U. S., ICS Code: 93.020 edition, 2007. doi: 10.1520/D0698-07E01.
[82] ASTM Standard D1557. Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort. ASTM International,West Conshohocken, PA, U. S., 2009. doi: 10.1520/D1557-09.
[83] L. Wang, X. Xie, and H. Luan. Influence of laboratory compaction methods on shear performance of graded crushed stone. Journal of Materials in Civil Engineering, 23(10):1483–1487, 2011. doi: 10.1061/(ASCE)MT.1943-5533.0000323.
[84] A. Alaoui and A. Helbling. Evaluation of soil compaction using hydrodynamic water content variation: Comparison between compacted and non-compacted soil. Geoderma, 134(1):97– 108, 2006. doi: 10.1016/j.geoderma.2005.08.016.
[85] M. Livneh and N.A. Livneh. Use of the one-point Proctor modified compaction method in family compaction curves possessing a limited trend characteristic. In Airfield and Highway Pavement 2013: Sustainable and Efficient Pavements, pages 1304–1315, 2013. doi: 10.1061/9780784413005.110.
[86] A.F. Elhakim. Estimation of soil permeability. Alexandria Engineering Journal, 55(3):2631– 2638, 2016. doi: 10.1016/j.aej.2016.07.034.
[87] Y. Yu, J.A. Huisman, A. Klotzsche, H. Vereecken, and L. Weihermüller. Coupled fullwaveform inversion of horizontal borehole ground penetrating radar data to estimate soil hydraulic parameters: A synthetic study. Journal of Hydrology, 610:127817, 2022. doi: 10.1016/j.jhydrol.2022.127817.
[88] J. Zhou, S. Laumann, and T.J. Heimovaara. Applying aluminum-organic matter precipitates to reduce soil permeability in-situ:Afield and modeling study. Science of The Total Environment, 662:99–109, 2019. doi: 10.1016/j.scitotenv.2019.01.109.
[89] A. Takai, T. Inui, and T. Katsumi. Evaluating the hydraulic barrier performance of soilbentonite cutoff walls using the piezocone penetration test. Soils and Foundations, 56(2):277– 290, 2016. doi: 10.1016/j.sandf.2016.02.010.
[90] Y.X. Lim, S.A. Tan, and K.-K. Phoon. Interpretation of horizontal permeability from piezocone dissipation tests in soft clays. Computers and Geotechnics, 107:189–200, 2019. doi: 10.1016/j.compgeo.2018.12.001.
[91] Y. Liu, S.J. Chen, K. Sagoe-Crentsil, andW. Duan. Predicting the permeability of consolidated silty clay via digital soil reconstruction. Computers and Geotechnics, 140:104468, 2021. doi: 10.1016/j.compgeo.2021.104468.
[92] T. Shibi and Y. Ohtsuka. Influence of applying overburden stress during curing on the unconfined compressive strength of cement-stabilized clay. Soils and Foundations, 61(4):1123–1131, 2021. doi: 10.1016/j.sandf.2021.03.007.
[93] N. Kardani, A. Zhou, S.-L. Shen, and M. Nazem. Estimating unconfined compressive strength of unsaturated cemented soils using alternative evolutionary approaches. Transportation Geotechnics, 29:100591, 2021. doi: 10.1016/j.trgeo.2021.100591.
[94] F. Mousavi, E. Abdi, S. Ghalandarayeshi, and D.S. Page-Dumroese. Modeling unconfined compressive strength of fine-grained soils: Application of pocket penetrometer for predicting soil strength. CATENA, 196:104890, 2021. doi: 10.1016/j.catena.2020.104890.
[95] A. Ahmed. Compressive strength and microstructure of soft clay soil stabilized with recycled bassanite. Applied Clay Science, 104:27–35, 2015. doi: 10.1016/j.clay.2014.11.031.
[96] J.B. Burland. On the compressibility and shear strength of natural clays. Géotechnique, 40(3):329–378, 1990. doi: 10.1680/geot.1990.40.3.329.
[97] S.M. Rao and P. Shivananda. Compressibility behaviour of lime-stabilized clay. Geotechnical and Geological Engineering, 23:301–311, 2005. doi: 10.1007/s10706-004-1608-2.
[98] M. Al-Mukhtar, S. Khattab, and J.-F. Alcover. Microstructure and geotechnical properties of lime-treated expansive clayey soil. Engineering Geology, 139-140:17–27, 2012. doi: 10.1016/j.enggeo.2012.04.004.
[99] A. al-Swaidani, I. Hammoud, and A. Meziab. Effect of adding natural pozzolana on geotechnical properties of lime-stabilized clayey soil. Journal of Rock Mechanics and Geotechnical Engineering, 8(5):714–725, 2016. doi: 10.1016/j.jrmge.2016.04.002.
[100] C. Phetchuay, S. Horpibulsuk, A. Arulrajah, C. Suksiripattanapong, and A. Udomchai. Strength development in soft marine clay stabilized by fly ash and calcium carbide residue based geopolymer. Applied Clay Science, 127-128:134–142, 2016. doi: 10.1016/j.clay.2016.04.005.
[101] V. Lemenkov and P. Lemenkova. Testing deformation and compressive strength of the frozen fine-grained soils with changed porosity and density. Journal of Applied Engineering Sciences, 11(2):113–120, 2021. doi: 10.2478/jaes-2021-0015.
[102] V. Lemenkov and P. Lemenkova. Using TeX markup language for 3D and 2D geological plotting. Foundations of Computing and Decision Sciences, 46(3):43–69, 2021. doi: 10.2478/fcds-2021-0004.
[103] P.K. Robertson, S. Sasitharan, J.C. Cunning, and D.C. Sego. Shear-wave velocity to evaluate in-situ state of Ottawa sand. Journal of Geotechnical Engineering, 121(3):262–273, 1995. doi: 10.1061/(ASCE)0733-9410(1995)121:3(262).
[104] K. Komal, S. Bawa, and S. KantSharma. Laboratory investigation on the effect of polypropylene and nylon fiber on silt stabilized clay. Materials Today: Proceedings; International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, 52:1368–1376, 2021. doi: 10.1016/j.matpr.2021.11.123.
[105] H. Källén, A. Heyden, and P. Lindh. Estimation of grain size in asphalt samples using digital image analysis. In Proceedings: Applications of Digital Image Processing XXXVII, volume 9217, pages 292–300, 2014. doi: 10.1117/12.2061730.
[106] Swedish Institute for Standards. SIS: Geotechnical investigation and testing – Laboratory testing of soil – Part 7: Unconfined compression test (ISO 17892-7:2017), 2017. ISO 17892- 7:2017.
[107] Swedish Institute for Standards. SIS: Earthworks – Part 4: Soil treatment with lime and/or hydraulic binders. online, 2018. SS-EN 16907-4:2018.
[108] Swedish Institute for Standards. Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019). online, 2019. Article no: STD- 80010356.
[109] BSI Standards Publication. Cement part 1: Composition, specifications and conformity criteria for common cements. European Standard (English version), 2011. BS EN 197-1:2011. ISBN: 978 0 580 68241 4.
[110] Thomas Concrete Group. Teknisk Information. Slagg Bremen Mald granulerad masugnsslagg för användning i betong och bruk enligt SS 137003. https://thomasconcretegroup.com/us/, 2014. Retrieved 2014-01-16 from Thomas Concrete Group.
[111] N.Ryden,U. Dahlen, P. Lindh, and A. Jakobsson. Impact non-linear reverberation spectroscopy applied to non-destructive testing of building materials. The Journal of the Acoustical Society of America, 140(4):3327–3327, 2016. doi: 10.1121/1.4970601.

[1] M. Blagojević, M. Matejić, and N. Kostić. Dynamic behaviour of a two-stage cycloidal speed reducer of a new design concept. Tehnički Vjesnik, 25(2):291–298, 2018, doi: 10.17559/TV- 20160530144431.
[2] M. Wikło, R. Król, K. Olejarczyk, and K. Kołodziejczyk. Output torque ripple for a cycloidal gear train. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(21–22):7270–7281, 2019, doi: 10.1177/0954406219841656.
[3] N. Kumar, V. Kosse, and A. Oloyede. A new method to estimate effective elastic torsional compliance of single-stage Cycloidal drives. Mechanism and Machine Theory, 105:185–198, 2016, doi: 10.1016/j.mechmachtheory.2016.06.023.
[4] C.F. Hsieh. The effect on dynamics of using a new transmission design for eccentric speed reducers. Mechanism and Machine Theory, 80:1–16, 2014, doi: 10.1016/j.mechmachtheory.2014.04.020.
[5] R. Król. Kinematics and dynamics of the two stage cycloidal gearbox. AUTOBUSY – Technika, Eksploatacja, Systemy Transportowe, 19(6):523–527, 2018, doi: 10.24136/atest.2018.125.
[6] K.S. Lin, K.Y. Chan, and J.J. Lee. Kinematic error analysis and tolerance allocation of cycloidal gear reducers. Mechanism and Machine Theory, 124:73–91, 2018, doi: 10.1016/j.mechmachtheory.2017.12.028.
[7] L.X. Xu, B.K. Chen, and C.Y. Li. Dynamic modelling and contact analysis of bearing-cycloid-pinwheel transmission mechanisms used in joint rotate vector reducers. Mechanism and Machine Theory, 137:432–458, 2019, doi: 10.1016/j.mechmachtheory.2019.03.035.
[8] D.C.H. Yang and J.G. Blanche. Design and application guidelines for cycloid drives with machining tolerances. Mechanism and Machine Theory, 25(5):487–501, 1990, doi: 10.1016/0094-114X(90) 90064-Q.
[9] J.W. Sensinger. Unified approach to cycloid drive profile, stress, and efficiency optimization. Journal of Mechanical Design, 132(2):024503, 2010, doi: 10.1115/1.4000832.
[10] Y. Li, K. Feng, X. Liang, and M.J. Zuo. A fault diagnosis method for planetary gearboxes under non-stationary working conditions using improved Vold-Kalman filter and multi-scale sample entropy. Journal of Sound and Vibration, 439:271–286, 2019, doi: 10.1016/j.jsv.2018.09.054.
[11] Z.Y. Ren, S.M. Mao, W.C. Guo, and Z. Guo. Tooth modification and dynamic performance of the cycloidal drive. Mechanical Systems and Signal Processing, 85:857–866, 2017, doi: 10.1016/j.ymssp.2016.09.029.
[12] L.X. Xu and Y.H. Yang. Dynamic modeling and contact analysis of a cycloid-pin gear mechanism with a turning arm cylindrical roller bearing. Mechanism and Machine Theory, 104:327–349, 2016, doi: 10.1016/j.mechmachtheory.2016.06.018.
[13] S. Schmidt, P.S. Heyns, and J.P. de Villiers. A novelty detection diagnostic methodology for gearboxes operating under fluctuating operating conditions using probabilistic techniques, Mechanical Systems and Signal Processing, vol. 100, pp. 152–166, 2018, doi: 10.1016/j.ymssp.2017.07.032.
[14] Y. Lei, D. Han, J. Lin, and Z. He. Planetary gearbox fault diagnosis using an adaptive stochastic resonance method. Mechanical Systems and Signal Processing, 38(1):113–124, 2013, doi: 10.1016/j.ymssp.2012.06.021.
[15] Y. Chen, X. Liang, and M.J. Zuo. Sparse time series modeling of the baseline vibration from a gearbox under time-varying speed condition. Mechanical Systems and Signal Processing, 134:106342, 2019, doi: 10.1016/j.ymssp.2019.106342.
[16] G. D’Elia, E. Mucchi, and M. Cocconcelli. On the identification of the angular position of gears for the diagnostics of planetary gearboxes. Mechanical Systems and Signal Processing, 83:305–320, 2017, doi: 10.1016/j.ymssp.2016.06.016.
[17] X. Chen and Z. Feng. Time-frequency space vector modulus analysis of motor current for planetary gearbox fault diagnosis under variable speed conditions. Mechanical Systems and Signal Processing, 121:636–654, 2019, doi: 10.1016/j.ymssp.2018.11.049.
[18] S. Schmidt, P.S. Heyns, and K.C. Gryllias. A methodology using the spectral coherence and healthy historical data to perform gearbox fault diagnosis under varying operating conditions. Applied Acoustics, 158:107038, 2020, doi: 10.1016/j.apacoust.2019.107038.
[19] D. Zhang and D. Yu. Multi-fault diagnosis of gearbox based on resonance-based signal sparse decomposition and comb filter. Measurement, 103:361–369, 2017, doi: 10.1016/j.measurement.2017.03.006.
[20] C. Wang, H. Li, J. Ou, R. Hu, S. Hu, and A. Liu. Identification of planetary gearbox weak compound fault based on parallel dual-parameter optimized resonance sparse decomposition and improved MOMEDA. Measurement, 165:108079, 2020, doi: 10.1016/j.measurement.2020.108079.
[21] W. Teng, X. Ding, H. Cheng, C. Han, Y. Liu, and H. Mu. Compound faults diagnosis and analysis for a wind turbine gearbox via a novel vibration model and empirical wavelet transform. Renewable Energy, 136:393–402, 2019, doi: 10.1016/j.renene.2018.12.094.
[22] R. Król. Resonance phenomenon in the single stage cycloidal gearbox. Analysis of vibrations at the output shaft as a function of the external sleeves stiffness. Archive of Mechanical Engineering, 68(3):303–320, 2021, doi: 10.24425/ame.2021.137050.
[23] MSC Software. MSC Adams Solver Documentation.
[24] MSC Software. MSC Adams View Documentation.

[1] S. Wang, T. Moan, and Z. Jiang. Influence of variability and uncertainty of wind and waves on fatigue damage of a floating wind turbine drivetrain. Renewable Energy, 181:870–897, 2022. doi: 10.1016/j.renene.2021.09.090.
[2] Z. Yu, C. Zhu, J. Tan, C. Song, and Y. Wang. Fully-coupled and decoupled analysis comparisons of dynamic characteristics of floating offshore wind turbine drivetrain. Ocean Engineering, 247:110639, 2022. doi: 10.1016/j.oceaneng.2022.110639.
[3] F.K. Moghadam and A.R. Nejad. Online condition monitoring of floating wind turbines drivetrain by means of digital twin. Mechanical Systems and Signal Processing, 162:108087, 2022. doi: 10.1016/j.ymssp.2021.108087.
[4] W. Shi, C.W. Kim, C.W. Chung, and H.C. Park. Dynamic modeling and analysis of a wind turbine drivetrain using the torsional dynamic model. International Journal of Precision Engineering and Manufacturing, 14(1):153–159, 2013. doi: 10.1007/s12541-013-0021-2.
[5] M. Todorov and G. Vukov. Parametric torsional vibrations of a drive train in horizontal axis wind turbine. In Proceeding of the 1st Conference Franco-Syrian about Renewable Energy, pages 1–17, Damas, 24-28 October, 2010.
[6] R.C. Juvinall and K.M. Marshek. Fundamentals of Machine Component Design. John Wiley & Sons, 2020.
[7] Q. Zhang, J. Kang, W. Dong, and S. Lyu. A study on tooth modification and radiation noise of a manual transaxle. International Journal of Precision Engineering and Manufacturing, 13(6):1013–1020, 2012. doi: 10.1007/s12541-012-0132-1.
[8] B. Shlecht, T. Shulze, and T. Rosenlocher. Simulation of heavy drive trains with multimegawatt transmission power in SimPACK. In: SIMPACK Users Meeting, Baden-Baden, Germany, 21-22 March, 2006.
[9] M. Todorov and G. Vukov. Modal properties of drive train in horizontal axis wind turbine. The Romanian Review Precision Mechanics, Optics & Mechatronics, 40:267–275, 2011.
[10] D. Lee, D.H. Hodges, and M.J. Patil. Multi‐flexible‐body dynamic analysis of horizontal axis wind turbines. Wind Energy, 5(4):281–300, 2002. doi: 10.1002/we.66.
[11] F.L.J. Linden, P.H. Vazques, and S. Silva. Modelling and simulating the efficiency and elasticity of gearboxes, In Proceeding of the 7th Modelica Conference, pages 270–277, Como, 20-22 September, 2009.
[12] J. Wang, D. Qin, and Y. Ding. Dynamic behavior of wind turbine by a mixed flexible-rigid multi-body model. Journal of System Design and Dynamics, 3(3):403–419, 2009. doi: 10.1299/jsdd.3.403.
[13] A.A. Shabana. Computational Dynamics. John Wiley & Sons. 2009.
[14] A.K. Chopra. Dynamics of Structures. Pearson Education India. 2007.
[15] Y. Park, H. Park, Z. Ma, J. You, J. and W. Shi. Multibody dynamic analysis of a wind turbine drivetrain in consideration of the shaft bending effect and a variable gear mesh including eccentricity and nacelle movement. Frontiers in Energy Research, 8:604414, 2021. doi: 10.3389/fenrg.2020.604414.
[16] S.R. Singiresu. Mechanical Vibrations. Addison Wesley. 1995.
[17] R.R. Craig Jr and A.J. Kurdila. Fundamentals of Structural Dynamics. John Wiley & Sons. 2006.
[18] K.J. Bathe. Finite Element Procedures. Klaus-Jurgen Bathe. 2006.
[19] Y. Kim, C.W. Kim, S. Lee, and H. Park. Dynamic modeling and numerical analysis of a cold rolling mill. International Journal of Precision Engineering and Manufacturing, 14(3):407–413. 2013. doi: 10.1007/s12541-013-0056-4.
[20] S.J. Yoon and D.H. Choi. Reliability-based design optimization of slider air bearings. KSME International Journal, 18(10):1722–1729, 2004. doi: 10.1007/BF02984320.
[21] H.H. Chun,S.J. Kwon, T. and Tak. Reliability-based design optimization of automotive suspension systems. International Journal of Automotive Technology, 8(6):713–722, 2007.
[22] J. Fang, Y. Gao, G. Sun, and Q. Li. Multiobjective reliability-based optimization for design of a vehicledoor. Finite Elements in Analysis and Design, 67:13–21, 2013. doi: 10.1016/j.finel.2012.11.007.
[23] Y.L. Young, J.W. Baker, and M.R. Motley. Reliability-based design and optimization of adaptive marine structures. Composite Structures, 92(2):244–253, 2010. doi: 10.1016/j.compstruct.2009.07.024.
[24] G. Liu, H. Liu, C. Zhu, T. Mao, and G. Hu. Design optimization of a wind turbine gear transmission based on fatigue reliability sensitivity. Frontiers of Mechanical Engineering, 16(1):61–79, 2021. doi: 10.1007/s11465-020-0611-5.
[25] H. Li, H. Cho, H. Sugiyama, K.K. Choi, and N.J. Gaul. Reliability-based design optimization of wind turbine drivetrain with integrated multibody gear dynamics simulation considering wind load uncertainty. Structural and Multidisciplinary Optimization, 56 (1):183–201, 2017. doi: 10.1007/s00158-017-1693-5.
[26] C. Luo, B. Keshtegar, S.P. Zhu, O. Taylan, O. and X.P. Niu. Hybrid enhanced Monte Carlo simulation coupled with advanced machine learning approach for accurate and efficient structural reliability analysis. Computer Methods in Applied Mechanics and Engineering, 388:114218. doi: 10.1016/j.cma.2021.114218.

[1] J.M. Jalil, A.H. Ayaal, and A.A. Hardan. Numerical investigation of thermal performance for air solar collector with multi inlets. IOP Conference Series: Materials Science and Engineering, 765:012036, 2020. doi: 10.1088/1757-899X/765/1/012036.
[2] A. Abene, V. Dubois, M. Le Ray, and A. Ouagued. Study of a solar air flat plate collector: use of obstacles and application for the drying of grape. Journal of Food Engineering, 65(1):15–22, 2004. doi: 10.1016/j.jfoodeng.2003.11.002.
[3] R.S. Gill, S. Singh, and P.P. Singh. Low cost solar air heater. Energy Conversion and Management, 57:131–142, 2012. doi: 10.1016/j.enconman.2011.12.019.
[4] A.E. Kabeel, A. Khalil, S.M. Shalaby, and M.E. Zayed. Experimental investigation of thermal performance of flat and v-corrugated plate solar air heaters with and without PCM as thermal energy storage. Energy Conversion and Management, 113:264–772, 2016. doi: 10.1016/j.enconman.2016.01.068.
[5] A. Sakhrieh and A. Al-Ghandoor. Experimental investigation of the performance of five types of solar collectors. Energy Conversion and Management, 65:715–720, 2013. doi: 10.1016/j.enconman.2011.12.038.
[6] J.M. Jalil, K.F. Sultan, and L.A. Rasheed. Numerical and experimental investigation of solar air collectors performance connected in series. Engineering and Technology Journal, 35(3):190–196, 2017.
[7] J. Assadeg J, A.H.A. Al-Waeli, A. Fudholi, and K. Sopian. Energetic and exergetic analysis of a new double pass solar air collector with fins and phase change material. Solar Energy, 226:260–271, 2021. doi: 10.1016/j.solener.2021.08.056.
[8] J.M. Jalil and S.J. Ali. Thermal investigations of double pass solar air heater with two types of porous media of different thermal conductivity. Engineering and Technology Journal, 39(1):79–88, 2021. doi: 10.30684/etj.v39i1A.1704.
[9] S. Bassem, J.M. Jalil, and S.J. Ismael. Experimental study of double pass water passage in evacuated tube with parabolic trough collector. Journal of Physics: Conference Series, 1973:012058, 2021. doi: 10.1088/1742-6596/1973/1/012058.
[10] J.M. Jalil, R.F. Nothim, and M.M. Hameed. Effect of wavy fins on thermal performance of double pass solar air heater. Engineering and Technology Journal, 39(9):1362–1368, 2021. doi: 10.30684/etj.v39i9.1775.
[11] W. Siddique, A. Raheem, M. Aqeel, S. Qayyum, T, Salamen, K. Waheed, and K. Qureshi. Evaluation of thermal performance factor for solar air heaters with artificially roughened channels. Archive of Mechanical Engineering, 68(2):195–225, 2021. doi: 10.24425/ame.2021.137048.
[12] H.K. Ghritlahre. An experimental study of solar air heater using arc shaped wire rib roughness based on energy and exergy analysis. Archives of Thermodynamics, 42(3):115–139, 2021. doi: 10.24425/ather.2021.138112.
[13] A. Kumar, Akshayveer, A.P. Singh, and O.P. Singh. Efficient designs of double-pass curved solar air heaters. Renewable Energy, 160:1105–1118, 2020. doi: 10.1016/j.renene.2020.06.115.
[14] S. Abo-Elfadl, H. Hassan, and M.F. El-Dosoky. Study of the performance of double pass solar air heater of a new designed absorber: An experimental work. Solar Energy, 198:479–489, 2020. doi: 10.1016/j.solener.2020.01.091.
[15] S. Singh. Experimental and numerical investigations of a single and double pass porous serpentine wavy wiremesh packed bed solar air heater. Renewable Energy, 145:1361–1387, 2020. doi: 10.1016/j.renene.2019.06.137.
[16] H.K. Ghritlahre and P.K. Sahu. A comprehensive review on energy and exergy analysis of solar air heaters. Archives of Thermodynamics, 41(3):183–222, 2020. doi: 10.24425/ather.2020.134577.
[17] S. Dogra, R.D. Jilte, and A. Sharma. Study of performance enhancement of single and double pass solar air heater with change in surface roughness. Journal of Physics: Conference Series, 1531:012091, 2020. doi: 10.1088/1742-6596/1531/1/012091.
[18] S. Sivakumar, K. Siva, and M. Mohanraj. Experimental thermodynamic analysis of a forced convection solar air heater using absorber plate with pin-fins. Journal of Thermal Analysis and Calorimetry, 136(1):39–47, 2019. doi: 10.1007/s10973-018-07998-5.
[19] S.M. Salih J.M. Jalil, and S.E. Najim. Experimental and numerical analysis of double-pass solar air heater utilizing multiple capsules PCM. Renewable Energy, 143:1053–1066, 2019. doi: 10.1016/j.renene.2019.05.050.
[20] S. Singh, L. Dhruw, and S. Chander. Experimental investigation of a double pass converging finned wire mesh packed bed solar air heater. Journal of Energy Storage, 21:713–723, 2019. doi: 10.1016/j.est.2019.01.003.
[21] P.T. Saravanakumar, D. Somasundaram, and M.M. Matheswaran. Thermal and thermo-hydraulic analysis of arc shaped rib roughened solar air heater integrated with fins and baffles. Solar Energy, 180:360–371, 2019. doi: 10.1016/j.solener.2019.01.036.
[22] C.A. Komolafe, I.O. Oluwaleye, O. Awogbemi, and C.O. Osueke. Experimental investigation and thermal analysis of solar air heater having rectangular rib roughness on the absorber plate. Case Studies in Thermal Engineering, 14:100442, 2019. doi: 10.1016/j.csite.2019.100442.
[23] H. Mzad, K. Bey, and R. Khelif. Investigative study of the thermal performance of a trial solar air heater. Case Studies in Thermal Engineering, 13:100373, 2019. doi: 10.1016/j.csite.2018.100373.
[24] S.S. Patel and A. Lanjewar. Exergy based analysis of solar air heater duct with W-shaped rib roughness on the absorber plate. Archives of Thermodynamics, 40(4):21–48, 2019. doi: 10.24425/ather.2019.130006.
[25] A.S. Mahmood. Experimental study on double-pass solar air heater with and without using phase change material. Journal of Engineering. 25(2):1-17. doi: 10.31026/j.eng.2019.02.01.
[26] R.K. Ravi and R.P. Saini. Effect of roughness elements on thermal and thermohydraulic performance of double pass solar air heater duct having discrete multi V-shaped and staggered rib roughness on both sides of the absorber plate. Experimental Heat Transfer, 31(1):47–67, 2018. doi: 10.1080/08916152.2017.1350217.
[27] H. Hassan and S. Abo-Elfadl. Experimental study on the performance of double pass and two inlet ports solar air heater (SAH) at different configurations of the absorber plate. Renewable Energy, 116:728–740, 2018. doi: 10.1016/j.renene.2017.09.047.
[28] S.S. Hosseini, A. Ramiar, and A.A. Ranjbar. Numerical investigation of natural convection solar air heater with different fins shape. Renewable Energy, 117:488–500, 2018. doi: 10.1016/j.renene.2017.10.052.
[29] A.P. Singh and O.P. Singh. Performance enhancement of a curved solar air heater using CFD. Solar Energy, 174:556–569, 2018. doi: 10.1016/j.solener.2018.09.053.
[30] A.M. Rasham and M.M.M. Alaskari. Thermal analysis of double-pass solar air collector with different materials of absorber plate and different dimensions of air channels. International Journal of Science and Research (IJSR), 6(8):901–908, 2017.
[31] R. Kumar and P. Chand. Performance enhancement of solar air heater using herringbone corrugated fins. Energy, 127:271–279, 2017. doi: 10.1016/j.energy.2017.03.128.
[32] M.W. Kareem, K. Habib, and S.A. Sulaiman. Comparative study of single pass collector and double pass solar collector filled with porous media. Asian Journal of Scientific Research, 6(3):445–455, 2013. doi: 10.3923/ajsr.2013.445.455.
[33] A. Fudholi, M.H. Ruslan, M.Y. Othman, M. Yahya, S. Supranto, A. Zaharim, and K. Sopian. Collector efficiency of the double-pass solar air collectors with fins. In Proceedings of the 9th WSEAS International Conference on System Science and Simulation in Engineering, pages 428–434, Japan, 2010.
[34] B.M. Ramani, A. Gupta, and R. Kumar. Performance of a double pass solar air collector. Solar Energy, 84(11):1929–1937, 2010. doi: 10.1016/j.solener.2010.07.007.
[35] H.K. Versteeg and W. Malalsekera. An Introduction to Computational Fluid Dynamics. The Finite Volume Method. Pearson Education Ltd. 1995.
[36] B.E. Launder and D.B. Spalding. The numerical computation of turbulent flows. In S.V. Patankar, A. Pollard, A.K. Singhal, and S.P. Vanka, editors: Numerical Prediction of Flow, Heat Transfer, Turbulence and Combustion, pages 96–116. Pergamon, 1983. doi: 10.1016/B978-0-08-030937-8.50016-7.
[37] S.V. Patankar. Numerical Heat Transfer and Fluid Flow. CRC Press, 2018. doi: 10.1201/9781 482234213.
[38] N.I. Dawood, J.M. Jalil, and M.K. Ahmed. Experimental investigation of a window solar air collector with circular-perforated moveable absorber plates. Journal of Physics: Conference Series, 1973:012057, 2021. doi: 10.1088/1742-6596/1973/1/012057.
[39] F. Haghighat, Z. Jiang, J.C.Y. Wang, and F. Allard. Air movement in buildings using computational fluid dynamics. Journal of Solar Energy Engineering, 114(2):84–92, 1992. doi: 10.1115/ 1.2929994.

[1] Md J. Uddin, W.A. Khan, and A.I.Md Ismail. Similarity solution of double diffusive free convective flow over a moving vertical flat plate with convective boundary condition. Ain Shams Engineering Journal, 6(3):1105–1112, 2015. doi: 10.1016/j.asej.2015.01.008.
[2] J.A. Esfahani and B. Bagherian. Similarity solution for unsteady free convection from a vertical plate at constant temperature to power law fluids. Journal of Heat Transfer, 134(10):1–7, 2012. doi: 10.1115/1.4005750.
[3] Y.Z. Boutros, M.B. Abd-el-Malek, and N.A. Badran. Group theoretic approach for solving time-independent free-convective boundary layer flow on a nonisothermal vertical flat plate. Archiwum Mechaniki Stosowanej, 42(3):377–395, 1990.
[4] M. Modather, A.M. Rashad, and A.J. Chamkha. An analytical study of MHD heat and mass transfer oscillatory flow of a micropolar fluid over a vertical permeable plate in a porous medium. Turkish Journal of Engineering and Environmental Sciences, 33(4):245–257, 2009.
[5] M.V. Krishna and A.J. Chamkha. Hall and ion slip effects on MHD rotating flow of elastico-viscous fluid through porous medium. International Communications in Heat and Mass Transfer, 113:104494, 2020. doi: 10.1016/j.icheatmasstransfer.2020.104494.
[6] M.V. Krishna and A.J. Chamkha. Hall and ion slip effects on MHD rotating boundary layer flow of nanofluid past an infinite vertical plate embedded in a porous medium. Results in Physics, 15:102652, 2019. doi: 10.1016/j.rinp.2019.102652.
[7] M.V. Krishna, N.A. Ahamad, and A.J. Chamkha. Hall and ion slip effects on unsteady MHD free convective rotating flow through a saturated porous medium over an exponential accelerated plate. Alexandria Engineering Journal, 59(2):565–577, 2020. doi: 10.1016/j.aej.2020.01.043.
[8] A.J. Chamkha. Non-Darcy fully developed mixed convection in a porous medium channel with heat generation/absorption and hydromagnetic effects. Numerical Heat Transfer, Part A: Applications, 32(6):653–675, 1997. doi: 10.1080/10407789708913911.
[9] A.J. Chamkha. Thermal radiation and buoyancy effects on hydromagnetic flow over an accelerating permeable surface with heat source or sink. International Journal of Engineering Science, 38(15):1699–1712, 2000. doi: 10.1016/S0020-7225(99)00134-2.
[10] G. Rasool, T. Zhang, A.J. Chamkha, A. Shafiq, I. Tlili, and G. Shahzadi. Entropy generation and consequences of binary chemical reaction on MHD Darcy–Forchheimer Williamson nanofluid flow over non-linearly stretching surface. Entropy, 22(18):18, 2020. doi: 10.3390/e22010018.
[11] A.J. Chamkha, C. Issa, and K. Khanafer. Natural convection from an inclined plate embedded in a variable porosity porous medium due to solar radiation. International Journal of Thermal Sciences, 41(1):73–81, 2002. doi: 10.1016/S1290-0729(01)01305-9.
[12] A.J. Chamkha and A. Ben-Nakhi. MHD mixed convection-radiation interaction along a permeable surface immersed in a porous medium in the presence of Soret and Dufour's effects. Heat and Mass Transfer, 44:845, 2008. doi: 10.1007/s00231-007-0296-x.
[13] A.J. Chamkha. Hydromagnetic natural convection from an isothermal inclined surface adjacent to a thermally stratified porous medium. International Journal of Engineering Science, 35(10/11):975–986, 1997. doi: 10.1016/S0020-7225(96)00122-X.
[14] A. Wakif, A.J. Chamkha, I.L. Animasaun, M. Zaydan, H. Waqas, and R. Sehaqui. Novel physical insights into the thermodynamic irreversibilities within dissipative EMHD fluid flows past over a moving horizontal Riga plate in the coexistence of wall suction and Joule heating effects: A comprehensive numerical investigation. Arabian Journal for Science and Engineering, 45:9423–9438, 2020. doi: 10.1007/s13369-020-04757-3.
[15] N.A. Ahammad, I.A. Badruddin, S.Z. Kamangar, H.M.T. Khaleed, C.A. Saleel, and T.M.I. Mahlia. Heat Transfer and entropy in a vertical porous plate subjected to suction velocity and MHD. Entropy, 23(8):1069, 2021. doi: 10.3390/e23081069.
[16] M.V. Krishna, N.A. Ahamad, and A.J. Chamkha. Numerical investigation on unsteady MHD convective rotating flow past an infinite vertical moving porous surface. Ain Shams Engineering Journal, 12(2): 2099–2109, 2021. doi: 10.1016/j.asej.2020.10.013.
[17] P. Kandaswamy, A.K.A. Hakeem, and S.Saravanan. Internal natural convection driven by an orthogonal pair of differentially heated plates. Computers & Fluids, 111:179–186, 2015. doi: 10.1016/j.compfluid.2015.01.015.
[18] S.E. Ahmed, H.F. Oztop, and K. Al-Salem. Natural convection coupled with radiation heat transfer in an inclined porous cavity with corner heater. Computers & Fluids, 102:74–84, 2014. doi: 10.1016/j.compfluid.2014.06.024.
[19] S. Siddiqa, M.A. Hossain, and R.S.R. Gorla. Natural convection flow of viscous fluid over triangular wavy horizontal surface. Computers & Fluids, 106:130–134, 2015. doi: 10.1016/j.compfluid.2014.10.001.
[20] L. Zhou, S.W. Armfield, N. Williamson, M.P. Kirkpatrick, and W. Lin. Natural convection in a cavity with time-dependent flux boundary. International Journal of Heat and Fluid Flow, 92:108887, 2021. doi: 10.1016/j.ijheatfluidflow.2021.108887.
[21] K.M. Talluru, H.F. Pan, J.C. Patterson, and K.A. Chauhan. Convection velocity of temperature fluctuations in a natural convection boundary layer. International Journal of Heat and Fluid Flow, 84:108590, 2020. doi: 10.1016/j.ijheatfluidflow.2020.108590.
[22] M. Chakkingal, S. Kenjereš, I. Ataei-Dadavi, M.J. Tummers, and C.R. Kleijn. Numerical analysis of natural convection with conjugate heat transfer in coarse-grained porous media. International Journal of Heat and Fluid Flow, 77:48–60, 2019. doi: 10.1016/j.ijheatfluidflow.2019.03.008.
[23] N. Mahir and Z. Altaç. Numerical investigation of flow and combined natural-forced convection from an isothermal square cylinder in cross flow. International Journal of Heat and Fluid Flow, 75:103–121, 2019. doi: 10.1016/j.ijheatfluidflow.2018.11.013.
[24] M.A. Ezan and M. Kalfa. Numerical investigation of transient natural convection heat transfer of freezing water in a square cavity. International Journal of Heat and Fluid Flow, 61(Part B):438–448, 2016. doi: 10.1016/j.ijheatfluidflow.2016.06.004.
[25] A. Ouahouah, N. Labsi, X. Chesneau, and Y.K. Benkahla. Natural convection within a non-uniformly heated cavity partly filled with a shear-thinning nanofluid and partly with air. Journal of Non-Newtonian Fluid Mechanics, 289:104490, 2021. doi: 10.1016/j.jnnfm.2021.104490.
[26] M.H. Matin, I. Pop, and S. Khanchezar. Natural convection of power-law fluid between two-square eccentric duct annuli Journal of Non-Newtonian Fluid Mechanics, 197:11–23, 2013. doi: 10.1016/j.jnnfm.2013.02.002.
[27] M.T. Nguyen, A.M. Aly, and S.W. Lee. A numerical study on unsteady natural/ mixed convection in a cavity with fixed and moving rigid bodies using the ISPH method. International Journal of Numerical Methods for Heat & Fluid Flow, 28(3):684–703, 2018. doi: 10.1108/HFF-02-2017-0058.
[28] Y. Guo, R. Bennacer, S. Shen, D.E. Ameziani, and M. Bouzidi. Simulation of mixed convection in slender rectangular cavity with lattice Boltzmann method. International Journal of Numerical Methods for Heat & Fluid Flow, 20(1):130–148, 2010. doi: 10.1108/09615531011008163.
[29] N.B. Balam and A. Gupta. A fourth-order accurate finite difference method to evaluate the true transient behaviour of natural convection flow in enclosures. International Journal of Numerical Methods for Heat & Fluid Flow, 30(3):1233–1290, 2020. doi: 10.1108/HFF-06-2019-0519.
[30] L. Lukose and T. Basak. Numerical heat flow visualization analysis on enhanced thermal processing for various shapes of containers during thermal convection. International Journal of Numerical Methods for Heat & Fluid Flow, 30(7):3535–3583, 2020. doi: 10.1108/HFF-05-2019-0376.
[31] P. Pichandi, and S. Anbalagan. Natural convection heat transfer and fluid flow analysis in a 2D square enclosure with sinusoidal wave and different convection mechanism. International Journal of Numerical Methods for Heat & Fluid Flow, 28(9):2158–2188, 2018. doi: 10.1108/HFF-12-2017-0522.
[32] M. Salari, M.M. Rashidi,. E.H. Malekshah, and M.H. Malekshah. Numerical analysis of turbulent/transitional natural convection in trapezoidal enclosures. International Journal of Numerical Methods for Heat & Fluid Flow, 27(12):2902–2923, 2017. doi: 10.1108/HFF-03-2017-0097.
[33] A. Salama, M. El Amin, and S. Sun. Numerical investigation of natural convection in two enclosures separated by anisotropic solid wall. International Journal of Numerical Methods for Heat & Fluid Flow, 24(8):1928–1953, 2014. doi: 10.1108/HFF-09-2013-0268.
[34] N. Kim and J.N. Reddy. Least-squares finite element analysis of three-dimensional natural convection of generalized Newtonian fluids. International Journal for Numerical Methods in Fluids, 93(4):1292–1307, 2021. doi: 10.1002/fld.4929.
[35] J. Zhang and F. Lin. An efficient Legendre-Galerkin spectral method for the natural convection in two-dimensional cavities. International Journal for Numerical Methods in Fluids, 90(12):651–659, 2019.doi: 10.1002/fld.4742.
[36] J.C.F. Wong and P. Yuan. A FE-based algorithm for the inverse natural convection problem. International Journal for Numerical Methods in Fluids, 68(1):48–82, 2012. doi: 10.1002/fld.2494.
[37] H.S. Panda and S.G. Moulic. An analytical solution for natural convective gas micro flow in a tall vertical enclosure. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225(1):145–154, 2011. doi: 10.1243/09544062JMES1768.
[38] M. Saleem, S. Asghar, and M.A. Hossain. Natural convection flow in an open rectangular cavity with cold sidewalls and constant volumetric heat source. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225(5):1191–1201, 2011. doi: 10.1177/09544062JMES2648.
[39] A. Koca, H.F. Oztop, and Y. Varol. Natural convection analysis for both protruding and flush-mounted heaters located in triangular enclosure. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222(7):1203–1214, 2008. doi: 10.1243/09544062JMES886.
[40] M.K. Mansour. Effect of natural convection on conjugate heat transfer characteristics in liquid mini channel during phase change material melting. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228(3):491–513, 2014. doi: 10.1177/0954406213486590.
[41] E.F. Kent. Numerical analysis of laminar natural convection in isosceles triangular enclosures. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223(5):1157–1169, 2009. doi: 10.1243/09544062JMES1122.
[42] A. Belhocine and W.Z. Wan Omar. An analytical method for solving exact solutions of the convective heat transfer in fully developed laminar flow through a circular tube. Heat Transfer Asian Research, 46(8):1342–1353, 2017. doi: 10.1002/htj.21277.
[43] A. Belhocine and W. Z. Wan Omar. Numerical study of heat convective mass transfer in a fully developed laminar flow with constant wall temperature. Case Studies in Thermal Engineering, 6:116–127, 2015. doi: 10.1016/j.csite.2015.08.003.
[44] A. Belhocine and O.I. Abdullah. Numerical simulation of thermally developing turbulent flow through a cylindrical tube. International Journal of Advanced Manufacturing Technology, 102(5-8):2001–2012, 2019. doi: 10.1007/s00170-019-03315-y.
[45] A. Belhocine and W.Z. Wan Omar. Analytical solution and numerical simulation of the generalized Levèque equation to predict the thermal boundary layer. Mathematics and Computers in Simulation, 180:43–60, 2021. doi: 10.1016/j.matcom.2020.08.007.
[46] A. Belhocine, N.Stojanovic, and O.I. Abdullah. Numerical simulation of laminar boundary layer flow over a horizontal flat plate in external incompressible viscous fluid. European Journal of Computational Mechanics, 30(4-6):337–386, 2021.doi: 10.13052/ejcm2642-2085.30463.
[47] S. Ostrach. An analysis of laminar free convection flow and heat transfer about a flat plate parallel to the direction of the generating body force. National Advisory Committee for Aeronautics, Report 1111, 1953.
[48] T.L. Bergman, A.S. Lavine, F.P. Incropera, and D.P. Dewitt. Fundamentals of Heat and Mass Transfer, 7th ed., John Wiley & Sons, New York, 2011.